Removing The Panel Board - Epson Perfection V700 Photo Service Manual

Hide thumbs Also See for Perfection V700 Photo:

Table of Contents

EPSON Perfection V700 Photo

4.2.4

Removing the Panel Board

1. Disconnect the Panel Board Connector CN1 from the Sub Board.

See Step 1 to Step 3 in Section 4.2.3

2. Remove the C.B.P. M3 x 8 screw that secure the Front Cover, and

remove it.

Inside of the scanner

C.B.P. M3x8 (7±1 kgf.cm)

Front Cover

Figure 4-15. Removing the Front Cover

Disassembly / Assembly

3. Remove the C.B.P. M3 x 8 screw that secure the Panel Board and

remove the board releasing it from the hooked tab.

Positioning Holes and Dowels

Panel Board

Figure 4-16. Removing the Panel Board

If the LED Cover accidentally becomes detached,

install it matching the positioning holes and guide pins

as shown below.

When installing the Panel Board, match the positioning

holes and the guide pins as shown in

Disassembly Procedure

Tab

C.B.P. M3x8 (7±1 kgf.cm)

LED Cover

Positioning Holes and Dowels

Figure 4-17. Installing the LED Cover

Revision A

Figure

4-16.

Table of Contents

Show Quick Links

Table of Contents