Epson Perfection V700 Photo Service Manual page 56

Hide thumbs Also See for Perfection V700 Photo:

Table of Contents

EPSON Perfection V700 Photo

4. Lift the TPU Carriage Unit and remove the TPU CR Drive Belt from

the retaining clip.

Figure 4-39. Removing the TPU CR Drive Belt

5. Remove the Lock Plate that secures the DRV-SUB_B FFC CN1, and

remove the FFC from the TPU Carriage Unit.

6. Disconnect the DRV-SUB _B FFC CN1 from the SUB_B Board and

remove the TPU Carriage Unit.

SUB_B Board

Figure 4-40. Removing the TPU Carriage Unit

Disassembly / Assembly

TPU CR Drive Belt

Clip

Lock Plate

DRV-SUB_B FFC CN1

Disassembly Procedure

When attaching the DRV-SUB_B FFC to the TPU

Carriage Unit, align the positioning line on the FFC as

shown below and secure it with two pieces of two-sided

tape.

DRV-SUB_B FFC

Positioning Line

Tape Position

Figure 4-41. Attaching the DRV-SUB_B FFC

Be sure to route the DRV-SUB_B FFC inside the

protrusion of the TPU Carriage Unit as shown in the

figure below.

DRV-SUB_B FFC

Figure 4-42. Routing the DRV-SUB_B FFC

Revision A

Protrusion

Table of Contents

Show Quick Links

Table of Contents