Advertisement
ALLEN GROUP INT'L INC
STONE WELL WITH JUG FOUNTAIN
NOTE: The schematics in this manual are for assembly and operation illustration only. They may differ from the
fountain's actual appearance.
IF YOU HAVE ANY QUESTIONS, PROBLEMS OR NEED ADDITIONAL PARTS,
PLEASEDO NOT RETURN TO THE PLACE OF PURCHASE. CONTACT OUR
CUSTOMER SERVICE DEPARTMENT BY ALLENGROUPINTL@GMAIL.COM OR TOLL
FREE AT 1-866-321-0399, MONDAY THROUGH FRIDAY FROM 8:00AM TO 5:00PM.
MODEL # FF28228
ALLEN GROUP INT'L INC
377 South Lemon Ave, Suite A Walnut, CA 91789
Email: allengroupintl@gmail.com
Customer Service Toll Free
Monday through Friday from
1-866-321-0399
8:00am to 5:00pm
1
Advertisement
Table of Contents
Summary of Contents for ALLEN GROUP INT’L INC FF28228
- Page 1 ALLEN GROUP INT’L INC STONE WELL WITH JUG FOUNTAIN MODEL # FF28228 NOTE: The schematics in this manual are for assembly and operation illustration only. They may differ from the fountain’s actual appearance. IF YOU HAVE ANY QUESTIONS, PROBLEMS OR NEED ADDITIONAL PARTS, PLEASEDO NOT RETURN TO THE PLACE OF PURCHASE.
-
Page 2: Package Contents
PACKAGE CONTENTS Part Description Quantity Part Description Quantity Product Pump PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the product or return to the place of purchase.Contact our customer service department by allengroupintl@gmail.com or at 1-866-321-0399, Monday through Friday from 8:00am to 5:00pm for replacement parts or further instructions. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS This fountain may be used outdoors only. Place your fountain in a location where any water spills or splashing will not reach any other electrical equipment or cause damage. Choose an appropriate location before installing the fountain. DO NOT lift, push or drag the product when it’s filled with water. - Page 4 18. Do not use the pump for anything other than its intended use. 19. This fountain pump is not intended for commercial use. ASSEMBLY INSTRUCTIONS Step 1: Remove the product (A) from the box; place it on a level surface. Step 2: Connect PVC plastic tube to the outlet nozzle of pump (B), and put the pump (B) into the base through outlet hole.
-
Page 5: Troubleshooting
TROUBLESHOOTING If your FOUNTAIN PUMP fails to operate please check the following: Make sure the pump is it plugged into the socket properly. Check the water level in the fountain. Running the pump without sufficient water can damage the pump. Check the setting of the flow control on the pump.