Back-Up Lamps - Cadillac 2012 SRX Owner's Manual

Table of Contents

Vehicle Care

A. Turn Signal Lamp

B. Back-Up Bulb/Socket

6. Turn the turn signal lamp (A)

bulb socket counterclockwise to

remove it from the taillamp

7. Pull the bulb straight out from

8. Press a new bulb into the

socket, insert it into the taillamp

assembly and turn the bulb

socket clockwise until it clicks.

9. Reinstall the taillamp assembly

and tighten the screws.

10. Reinstall the taillamp cover by

snapping it into place.

11. Push the push pin to secure

the taillamp cover.

Back-Up Lamps

To replace one of these bulbs:

1. Open the liftgate. See Liftgate

on page 2 14.

B. Taillamp Cover

2. Pull on push pin (A) to release

the taillamp cover (B).

3. Remove the taillamp cover from

the lamp assembly by pulling

rearward from the top to

unfasten from snap tabs.

Table of Contents