Table of Contents
Advertisement
Quick Links
Installation and User Guide
Camera and Electronic Products for Integrators
V
™ P
VIEW™ HD
ADDIO
RODUCTION
Camera Control Console with HD/SD Video Switching, Video Transitions,
Up/Down Converting of Inputs and Outputs, Lower Screen Graphics and
Automated Control Functionality
Model Number 999-5600-000 (NTSC)
Model Number 999-5600-001 (PAL)
©2009 Vaddio - All Rights Reserved. ProductionVIEW HD - Document Number 341-759
Rev.
C
Advertisement
Table of Contents
Related Manuals for VADDIO PRODUCTIONVIEW HD 999-5600-000
Summary of Contents for VADDIO PRODUCTIONVIEW HD 999-5600-000
- Page 1 Camera Control Console with HD/SD Video Switching, Video Transitions, Up/Down Converting of Inputs and Outputs, Lower Screen Graphics and Automated Control Functionality Model Number 999-5600-000 (NTSC) Model Number 999-5600-001 (PAL) ©2009 Vaddio - All Rights Reserved. ProductionVIEW HD - Document Number 341-759 Rev.
- Page 2 Automatic Mode -- The console is equipped with an Automatic Camera Switching Mode (for compatible PTZ cameras on inputs 1 & 2), and when combined with Vaddio’s StepVIEW Mats, MicVIEW or other trigger devices, allows ProductionVIEW HD to be set up for use without an operator present.
-
Page 3: Intended Use
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions. - Page 4 10. Manual and Automatic Modes: In addition to a manual or “operator” mode there is an Automatic Camera Switching mode for PTZ camera presets assigned to Vaddio input triggers like the StepVIEW™ mats, AutoVIEW™ IR or TouchVIEW™ buttons.
- Page 5 12. Camera Co ntrol Ports o n RJ -45 con nectors: One camera control port per camera (no daisy- chaining required). Compatible with Sony, Canon and Vaddio PTZ cameras. See page 3 for details on cameras and camera systems compatible with ProductionVIEW HD.
-
Page 6: Getting Started
ProductionVIEW HD was designed to be exceptionally easy to use and operate right out of the box. All of the Vaddio standards for using video, power and control over Cat. 5 cabling are well documented and are in the manual and available free of charge from the Vaddio website. - Page 7 (3 or 6 foot length) Cable (Y-C & Composite) Vaddio Accessory Cable Part Numbers 440-5600-000 – 15-pin to SD (Y-C / CVBS) breakout cable (female BNCs – 1 foot) 440-5600-001 – 15-pin to HD Component (YPbPr/RGBHV) breakout cable (male BNCs – 3 foot) 440-5600-002 –...
- Page 8 ProductionVIEW HD Figure 7: In-depth ProductionVIEW HD Camera Control System Examples The ProductionVIEW HD is ideal for controlling multiple cameras or more complicated systems (external control system, SD and HD PTZ cameras, a computer and DVD player, with StepVIEW mats and an AutoVIEW IR as external triggers) as outlined above.
- Page 9 ProductionVIEW HD Operating the ProductionVIEW HD: Most of the console functions and controls are easy and intuitive. Over the next few pages there are details on how the different functions operate. Camera Controls The controls that can be used to adjust a PTZ camera are highlighted in the diagram to the right (mechanical functions are in gray, and electronic in blue).
- Page 10 ProductionVIEW HD Wipe, Dissolve or Cut To set up the switcher to transition from the current input selected as the Program output to another input, select a different video signal on the Preview bus. In the example to the right, Program is on Input 1 and Preview is on Input 3.
- Page 11 ProductionVIEW HD Lower Screen Graphics Preparing to display Lower Screen Graphics on ProductionVIEW first select your “background” video input (typically a live camera) on the Program bus, and then select the input that has the computer graphics that are to be displayed, on the Preview bus. In the example to the right, the background is Input 1 on Program, and the computer is on Input 6.
- Page 12 ProductionVIEW HD is used in conjunction with Vaddio’s StepVIEW mats, MicVIEW system and AutoVIEW IR sensors or other trigger devices. These triggers allow ProductionVIEW HD to automatically switch between camera inputs and preset camera positions. In this mode, no operator is required.
- Page 13 ProductionVIEW HD Master Power, Manual and Auto Modes (continued) Master Power Switch • When the Master Power Switch is powered down, all of the attached cameras will be placed in standby. Press and hold the power switch for 3 seconds to initiate power down sequence. This is a safeguard to prevent accidental shutdown.
- Page 14 ProductionVIEW HD Video Input Menu >Select >All Ports (NOTE: Selecting ALL PORTS will configure all inputs to the same resolution) Ports 1 - 6 (NOTE: Same resolution options as Program Output menu, minus 1920 x 1200) Default Camera (Automatic and Start-up Modes – the default input selected on the Program bus when the system is turned on) >Select >...
- Page 15 >Port 06: (Select method – Direct Cam Ctrl or CCU) NOTE: When Vaddio Quick-Connect CCUs are used with ProductionVIEW HD, CCU mode disables Iris functions, AWB and BLC on the ProductionVIEW HD console, allowing the user to control these functions from...
- Page 16 ProductionVIEW HD >Preset Location >Local >6 InCam 6 Local In “Local” mode, the ProductionVIEW stores all 12 presets internally In “6 InCam 6 Local” mode, the presets 1 through 6 will be stored in the cameras. Presets 7 through 12 will be stored in the ProductionVIEW. Note: The “6 InCam 6 Local”...
-
Page 17: Compliance And Ce Declaration Of Conformity
This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment. ICES-003 Compliance This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. -
Page 18: Warranty Information
Vaddio Customer service – Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product or products. - Page 19 ProductionVIEW HD ProductionVIEW HD Back Panel (Figure 8): Connectors: Power: 18 VDC, 2.75A (5.5mm OD x 2.5mm ID) Inputs 1-6: Component (Y, Pb, Pr), RGBHV, S-Video (Y-C) or Composite (DE-15 female x 6), RS-232C Port (RJ-45 x 6) Preview Out: Component (Y, Pb, Pr), RGBHV, S-Video (Y-C) or Composite (DE-15 female x 2) Program Out: Component (Y, Pb, Pr), RGBHV, S-Video (Y-C) or Composite (DE-15 female x 2)
-
Page 20: General Specifications
** Certain equipment my not supply appropriate resolutions, and therefore may not function properly ProductionVIEW HD 999-5600-000 (NTSC) Part Numbers: 999-5600-001 (PAL) Compatible Cameras: Vaddio, Panasonic, Sony & Canon (see page 3 for specific models) Video Formats Supported: NTSC and PAL Video Switcher: 6 x 2 Video Transitions:... -
Page 21: Appendix 1: Rs-232 Control
Each Channel will auto-configure the input channel for control of the camera attached. Vaddio uses simple control protocols to accomplish custom programming with the ProductionVIEW HD. The Communication Specification, API and Programming Language are listed below and definitions are listed on the next page. - Page 22 ProductionVIEW HD Appendix 1: Command Structure Definitions Command Para meters Description AWB On/Off(cr) Auto White Balance On/Off BLC On/Off(cr) Backlight Compensation On/Off Camera Camera [9](cr) Select indicated camera (1-6) CamFolPrv CamFolPrv On/Off(cr) Set Select follows Review selection On/Off ClearAll ClearAll(cr) Clear all presets Config Config(cr)
-
Page 23: Camera Control Ports 1 Through 6 - Rs-232 On Rj-45 Connectors
ProductionVIEW HD Appendix 2: Video and Control Pin-out Table for ProductionVIEW HD RGBHV YPbPr Y/C & Composite Adapter Cable Green Blue Red GND Pr GND Green GND Y GND Blue GND Pb GND No Pin Y - Luminance C - Chrominance H-Sync V-Sync Composite... - Page 24 ProductionVIEW HD ProductionVIEW HD Manual 341-759 Rev. C Page 24 of 24...