Setup Parameters; Devices And I/O Ports - IBM 2196 User Manual
Hide thumbs
Also See for 2196:
- User manual (208 pages) ,
- Manual de l'utilisateur (226 pages) ,
- Guida per l'utente (206 pages)
Table of Contents
Advertisement
Setup parameters
Devices and I/O Ports
Use the options in this menu to configure the devices and I/O ports in this computer.
Diskette Drive A
Use this setting to define the type of drive installed as drive A.
None
720K, 3.5 in
1.44M, 3.5 in
PS/2 Mouse function
Determines the PS/2 Mouse function is enabled or disabled.
On Board Audio
Use this setting to enable or disable the audio function that is integrated on the
system board.
On Board LAN
Use this setting to enable or disable the local area network (LAN) function built into
the computer.
Serial Port Setup
Use these settings to define the I/O port address and interrupt-request number to
be used by the serial port.
Parallel Port Setup
Use these settings to define the I/O port address and interrupt-request number to
be used by the parallel port. These settings also control the parallel port mode (EPP ,
ECP , ECP/EPP , or SPP , and the DMA setting for ECP , if used).
No floppy drive installed
3-1/2 inch double-sided drive; 720 kilobyte capacity
3-1/2 inch double-sided drive; 1.44 megabyte capacity
BIOS Setup configuration
6-9
Advertisement
Table of Contents
