Table of Contents
Advertisement
EAS21890
REMOVING THE FRONT WHEELS
The following procedure applies to both of the
front wheels.
1. Place the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
TIP
Place the vehicle on a suitable stand so that
the front wheel is elevated.
2. Remove:
• Front wheel
EAS29380
CHECKING THE FRONT WHEELS
The following procedure applies to both of the
front wheels.
1. Check:
• Tire
• Wheel
Refer to "CHECKING THE TIRES" on
page 3-15 and "CHECKING THE
WHEELS" on page 3-15.
2. Measure:
• Radial wheel runout "1"
• Lateral wheel runout "2"
Over the specified limit → Replace the
wheel or check the wheel bearing play
"3".
Radial wheel runout limit
2.0 mm (0.08 in)
Lateral wheel runout limit
2.0 mm (0.08 in)
3. Check:
• Wheel balance
Out of balance → Adjust.
EWA15000
WARNING
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in vehicle damage and possible
injury.
EAS29390
CHECKING THE FRONT WHEEL HUBS
The following procedure applies to both of the
front wheel hubs.
1. Check:
• Wheel hub "1"
Cracks/damage → Replace.
4-7
FRONT WHEEL
- Quick Links:
- Engine Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
