Console Settings; Snmp Settings - D-Link DWL-2700AP User Manual

Outdoor ap/bridge wireless g outdoor ap/bridge

Hide thumbs Also See for DWL-2700AP:

Table of Contents

Tool > Administrator Settings (continued)

Console Settings

Status: Status is Enabled by default. Uncheck the box to disable the console.

Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.

Status: Status is Enabled by default. Uncheck the box to disable the SNMP

Public Community

String:

Private Community

String:

Trap Status: Check the box to enable the trap status.

Trap Server IP: Enter the trap server IP address. This is the IP address of the SNMP

Trap Type: You can specify what kind of trap type (System, Wireless) should be sent

Ping Control

Setting:

D-Link DWL-2700AP User Manual

functions.

Enter the public SNMP community string.

Enter the private SNMP community string.

manager to receive traps sent from the wireless access point.

to the trap server.

Check the box to enable Ping control. Ping works by sending ICMP "echo

request" packets to the target host and listening for ICMP echo response

replies. By disabling the Ping control setting, the AP will not respond to

the ICMP echo request packets. Default is set to enabled..

Table of Contents