Page 1 Points out hazards or unsafe practices that could cause minor the operation of your vehicle. personal injury or damage to your vehicle. Please note that this manual applies to all LANCER models You will see another important symbol: and explains all features including options. Some features NOTE Gives helpful information.
Page 2: Table Of Contents
Table of contents Overview Quick index General information Seat and restraint systems Features and controls Driving safety Comfort controls For emergencies Vehicle care and maintenance Customer assistance/ Reporting Safety Defects Specifications...
Page 3 Overview Instruments and controls (Driver’s area) N00100201143 Except for RALLIART Instrument cluster P.3-158 Sportronic steering wheel paddle Multi-information meter switch shifter (if so equipped) P.3-101 P.3-164 Combination headlights and dimmer switch P.3-217 Turn signal lever P.3-225 Wiper and washer switch Front fog light switch (if so P.3-228 equipped) P.3-227...
Page 4 Overview RALLIART Instrument cluster P.3-158 Sportronic steering wheel paddle Multi-information meter switch shifter P.3-119 P.3-164 Combination headlights and dimmer switch P.3-217 Wiper and washer switch Turn signal lever P.3-225 P.3-228 Front fog light switch P.3-227 Cruise control switches Steering wheel audio remote P.3-143 control switches P.5-112 Ignition switch P.3-81...
Page 5 Overview Instruments and controls N00100201156 Except for RALLIART Supplemental restraint system - airbag Gearshift or selector lever P.3-91, 3-94 (for front passenger’s seat) P.2-35 Vents P.5-2 Glove compartment P.3-279 Parking brake lever P.3-74 Trunk lid release Cup holder (for front seats) P.3-282 lever P.3-59 Fuel tank filler Heated seat switch (if so equipped) P.2-7...
Page 6 Overview RALLIART Supplemental restraint system - airbag Gearshift lever P.3-106 (for front passenger’s seat) P.2-35 Vents P.5-2 Glove compartment P.3-279 Parking brake lever P.3-74 ACD control mode Trunk lid release Cup holder (for front switch P.3-128 lever P.3-59 seats) P.3-282 Heated seat switch Fuel tank filler (if so equipped)
Page 7 Audio (if so equipped) P.5-52, 5-80 Digital clock P.5-124 Digital clock P.5-124 Mitsubishi Multi-Communication System (if so Mitsubishi Multi-Communication System (if so equipped) Refer to the separated “Mitsubishi equipped) Refer to the separated “Mitsubishi Multi-Communication System owner’s manual” Multi-Communication System owner’s manual” Hazard warning flasher...
Page 8 Overview Interior N00100300916 Electric remote- Dome light (Front)/Reading lights Sunroof switch controlled out- (if so equipped) P.3-274, 7-59, 7-86 (if so equipped) Window lock switch P.3-70 side mirror switch P.3-71 P.3-79 Power window Power door lock switches P.3-67 switch (if so equipped) P.3-55 ®...
Page 9 Overview Interior N00100300802 Supplemental restraint system - curtain airbag P.2-52 Coat hook (if so equipped) Dome light (Rear, if so equipped) P.3-276, P.3-284 7-59, 7-87 Assist grip P.3-284 Rear seat P.2-8 Tether anchors for child restraint Cup holder (for rear seat, if so equipped) P.3-282 system P.2-28 Arm rest (if so equipped) P.2-9...
Page 10: Trunk Area
Overview Trunk area N00100500413 Inside emergency trunk lid release Trunk area light P.7-59, 7-89 lever P.3-62 Spare tire P.6-10 AWC control fluid reservoir (RALLIART) P.7-20 Jack P.6-8 Tools P.6-7...
Page 11: Compartment P
Overview Outside (Front) N00100601062 Locking and unlocking P.3-52 Except for RALLIART Sunroof (if so equipped) P.3-71 Keyless entry system (if so equipped) P.3-9 Windshield wiper and washer F.A.S.T.-key (Free-hand Advanced Security P.3-228 Transmitter) (if so equipped) P.3-16 Fuel tank filler Engine compartment P.7-7 P.1-4 Engine hood P.7-4...
Page 12 Overview Locking and unlocking P.3-52 RALLIART Sunroof (if so equipped) P.3-71 Keyless entry system P.3-9 F.A.S.T.-key (Free-hand Advanced Windshield wiper and washer Security Transmitter) (if so equipped) P.3-16 P.3-228 Engine compartment P.7-7 Fuel tank filler Engine hood P.7-4 P.1-4 Outside rearview mirrors P.3-79 Side turn-signal lights P.3-225, 7-56 Front fog lights P.3-227, 7-56, 7-76 [Except for vehicles with high intensity discharge...
Page 13 Overview Outside (Rear) N00100601075 Except for RALLIART Tire inflation pressure P.7-32 Antenna P.5-122 Changing tires P.6-9 Tire rotation P.7-36 Wheel covers (if so equipped) P.6-20 Tire chains P.7-37 High-mounted stop light P.7-56 Tire pressure monitoring system P.3-152 Trunk lid P.3-59 Trunk lid OPEN switch (if so equipped) P.3-20...
Page 14 Overview RALLIART Antenna P.5-122 Tire inflation pressure P.7-32 Changing tires P.6-9 Tire rotation P.7-36 High-mounted stop light P.7-56 Tire chains P.7-37 Tire pressure monitoring system P.3-152 Trunk lid P.3-59 Trunk lid OPEN switch (if so equipped) P.3-20 Rear side-marker lights P.3-217, 7-56, 7-80 License plate lights Rear turn-signal lights P.3-225, 7-56, 7-80...
Page 16 If the brake fluid level is correct, there may be a system malfunction. Avoid hard braking and high speeds, and contact an authorized Brake warning light Mitsubishi Motors dealer or a repair facility of your choice for assis- tance. Although your vehicle will usually be drivable and not need towing, have the engine system checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible.
Page 17 3-136 recommend that you have the system checked at an authorized Anti-lock braking system warning light Mitsubishi Motors dealer or a repair facility of your choice as soon as (if so equipped) possible. It is not necessary to stop the vehicle immediately, but we recommend P.2-23,...
Page 18 Quick index If this problem occurs... N00200900737 Problem Do this Ref. Page When using a key to start the engine Cannot turn the key. Will not turn from “LOCK” to “ACC”. (When using a key to start the Turn the key while turning the steering wheel in either direction. engine) Will not turn from “ACC”...
Page 19 Quick index Problem Do this Ref. Page Cannot shift the selector lever (CVT) or the gearshift lever (Twin Shift the selector lever (CVT) or the gearshift lever (Twin Clutch SST) while press- Clutch SST) from the “P” (PARK) ing the brake pedal. P.3-94, 3-106 position.
Page 20 Quick index Problem Do this Ref. page The engine coolant temperature display “ ” in the multi-informa- tion display is flashing. Steam comes out of the engine compartment. Type 1 The engine is overheated. P.6-5 Carefully stop the vehicle in a safe place. Type 2 The vehicle is stuck in sand, mud, Rock your vehicle back and forth to free it.
Page 21 Mitsubishi Motors dealer. (for vehicles with CVT) Twin Clutch SST does not shift. Vehicle cannot move.
Page 22: General Information
Filling the fuel tank ......1- Modifications to and racing of your vehicle ..1- Mitsubishi Motors genuine parts ....1- California Perchlorate Materials Requirements. . .1- 10...
Page 23: Fuel Selection
General information Fuel selection Octane requirement N00301000752 Except for RALLIART Your vehicle is designed to use unleaded gasoline only. It is Your vehicle is designed to operate on unleaded gasoline hav- equipped with a fuel filler tube especially designed to accept ing a minimum octane number of 87 [(MON+RON)/2], or 91 only a small diameter unleaded gasoline dispensing nozzle.
Page 24: Reformulated Gasoline
Use of gasolines blended with MMT may adversely affect per- formance, and cause the malfunction indicator on your instru- ment panel to come on. If this happens, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance.
Page 25: Filling The Fuel Tank
Be sure to use a genuine Mitsubishi handling it. When refueling your vehicle, always cleaning additive. Using an unsuitable additive could turn the engine off and keep away from flames, make the engine malfunction.
Page 26 General information Fuel tank capacity 3. Open the fuel tank filler pipe by slowly turning the cap counterclockwise. Except for RALLIART: 15.5 gal (59.0 L) RALLIART: 14.5 gal (55.0 L) Refueling 1. Before filling with fuel, stop the engine. 2. The fuel tank filler is located on the rear driver side of your vehicle.
Page 27 General information 4. While filling with fuel, store the cap in the cap holder 6. When the nozzle stops automatically, do not attempt to located on the inside of the fuel tank filler door. add more fuel. CAUTION To avoid fuel spillage and overfilling, do not “top- off”...
Page 28: Modifications To And Racing Of Your Vehicle
Mitsubishi Motors dealer or a repair facility of your DAMAGE OR PERFORMANCE PROBLEMS RESULT- choice as soon as possible. ING FROM MODIFICATIONS TO OR RACING OF YOUR VEHICLE ARE NOT COVERED UNDER WAR- RANTY.
Page 29 Only Mitsubishi Motors approved accessories should be always possible for an authorized Mitsubishi Motors dealer to fitted to your vehicle. check whether the attachment or installation of non-Mitsubishi Improper installation of electrical parts could cause fire.
Page 30: Mitsubishi Motors Genuine Parts
Also available from Mitsubishi Motors dealer before installation of any accessory your Mitsubishi Motors dealer are a wide variety of accessories which may involve modification of the electrical or fuel sys- to personalize your new vehicle. Each Mitsubishi vehicle has a tems.
Page 31: California Perchlorate Materials Requirements
General information California Perchlorate Materials Requirements N00300100017 Certain components of this vehicle, such as airbag modules, seat belt pretensioners, and button cell batteries, may contain perchlorate materials. Special handling may apply. For additional information, see www.dtsc.ca.gov/hazardouswaste/perchlorate. 1-10...
Page 32: Seat And Restraint Systems
Seat and restraint systems Seats ........2- Seats and restraint systems.
Page 33 Seat and restraint systems Seats N00408400378 1 - Front seats 2 - Rear seats To adjust the seat forward or backward → P.2-5 Folding the seatbacks forward (if so equipped) → P.2-8 To adjust the seatback → P.2-5 Arm rest (if so equipped) → P.2-9 To adjust the seat height (Driver’s side only, if so equipped) →...
Page 34: Seats And Restraint Systems
Seat and restraint systems Seats and restraint systems Front seats N00401600182 N00401800315 Your vehicle has seat belts and other features that help protect Position the driver’s seat as far back as possible while main- you and your passengers in an accident. taining a position that still enables you to fully apply the ped- Seat belts are the most important safety device.
Page 35 Seat and restraint systems WARNING CAUTION Do not attempt to adjust the seat while driving. This Make sure that the seat is adjusted by an adult. If it can cause loss of vehicle control and result in an is adjusted by a child, an unexpected accident might accident.
Page 36 Seat and restraint systems To adjust the seat forward or backward To adjust the seatback N00401900244 N00402000297 Pull the seat adjusting lever up and slide the seat forward or Except for RECARO seat backward to the desired position. Release the adjusting lever to To adjust the seatback, lean forward slightly, gently pull the lock the seat in place.
Page 37 Seat and restraint systems RECARO seat WARNING Adjust the seatback angle by turning the dial. To reduce the risk of serious injury or death in the event of an accident or sudden stop, all seatbacks should be kept in the upright position while the vehi- cle is in motion.
Page 38 Seat and restraint systems To adjust the seat height (Driver’s side only, if so Heated seats (if so equipped) equipped) N00435600251 The heated seats can be operated when the ignition switch is in N00402100184 the “ON” position. Operate the lever repeatedly to raise or lower the seat. 1- Heater high (for quick heating) 1- Raise 2- Heater off...
Page 39: Rear Seats
Seat and restraint systems Rear seats CAUTION N00402500162 Switch off the seat heaters when not in use. Operate Folding the seatbacks forward (if so equipped) the heaters at high for quick heating. After the seat N00402900179 has become warm, set the heater to low to keep it The rear seatbacks can be folded forward to provide additional warm.
Page 40 Seat and restraint systems Arm rest (if so equipped) WARNING N00403000249 Tilt the arm rest down for use as shown. Do not allow anyone to ride in the luggage compart- The arm rest includes a cup holder. (Refer to “Cup holder” on ment vehicle is in motion.
Page 41: Head Restraints
Seat and restraint systems Head restraints WARNING N00404300539 In order to minimize the risk of a neck injury due to Except for RECARO seat a rear impact, the head restraint must be adjusted to N00409400030 the proper position before vehicle operation. For the Padded head restraints for the seats can reduce the risk of a driver and front passenger, the seatbacks must be whiplash injury if your vehicle is hit from the rear.
Page 42 Seat and restraint systems Adjustment of the head restraint height To remove To reduce the risk of injury in an accident, adjust the head Press the lock knob (A) in the direction shown by the arrows. restraint height so that the center of the restraint is at your eye Then pull the head restraint up and out of the seatback.
Page 43 Seat and restraint systems CAUTION CAUTION Check that the lock knob (A) is extended out as The shape and size of the head restraint differs shown in the illustration. Then pull the head according to the seat. Always use the correct head restraint up to make sure that it is locked in place restraint provided for the seat and do not install the and will not come out of the seatback.
Page 44 Seat and restraint systems RECARO seat WARNING N00409500044 RECARO seats are equipped with padded head restraints inte- In order to minimize the risk of a neck injury due to grated with the seatbacks. These head restraints can reduce the a rear impact, the driver and front passenger risk of a whiplash injury if your vehicle is hit from the rear.
Page 45: Seat Belts
Seat and restraint systems Seat belts WARNING N00406000439 To reduce the risk to a front seat passenger of seri- Seat belts are installed in your vehicle to help reduce the risk of ous injury or death from a deploying airbag, make injury to the driver and passenger in the event of an accident.
Page 46: Seat Belt Instructions
Mitsubishi taining a position that still enables you to fully apply the Motors dealer to determine whether replacement is pedals, easily control the steering wheel, and safely oper- necessary.
Page 47 Seat and restraint systems 2. Grasp the latch plate and slide it up the webbing so that it WARNING easily pulls across your body. To reduce the risk of serious injury or death in the event of an accident or sudden stop, all seatbacks should be kept in the upright position while the vehi- cle is in motion.
Page 48 Seat and restraint systems 3. Pull the seat belt out slowly while holding the latch plate. 4. The lap part of the belt must always be worn low and snug Push the latch plate into the buckle until you hear a across the hips.
Page 49 Seat and restraint systems Driver’s seat belt reminder/warning light and NOTE With the exception of the seat belt for the driver, the seat display belts in all other seating positions are equipped with an N00418400300 Automatic Locking Retractor (ALR) function. If you pull Warning light the seat belt fully out of the retractor, the retractor will switch to its ALR child restraint installation function (see...
Page 50: Front Passenger Seat Belt Warning Light
Seat and restraint systems Front passenger seat belt warning light If you then repeatedly stop and start your vehicle with the seat belt unfastened, the warning light/display and tone will remind N00418300165 The front passenger seat belt warning light is located in the you to fasten your seat belt every time the vehicle starts mov- instrument panel.
Page 51 Seat and restraint systems Adjustable seat belt shoulder anchor (front seats) WARNING N00406300269 To move the anchor down, press the lock knob (A) and slide Always adjust the shoulder belt anchor so that the the anchor down to the desired position. shoulder belt is positioned across the center of your To move the anchor up, slide the anchor up to the desired posi- shoulder without touching your neck.
Page 52: Seat Belt Use During Pregnancy
Seat and restraint systems Seat belt use during pregnancy Seat belt extender N00406700087 N00406800121 When your seat belt, even fully extended, is not long enough, a Seat belts work for everyone, including pregnant women. Like seat belt extender must be obtained. The extender may be used all occupants, pregnant women are more likely to be seriously for either of the front seats.
Page 53: Seat Belt Pre-Tensioner And Force Limiter Systems
Seat and restraint systems Seat belt pre-tensioner and force limiter The seat belt pre-tensioner system includes the following com- ponents: systems N00417700566 The driver’s and front passenger’s seats each have a seat belt equipped with a pre-tensioner system. Pre-tensioner system The driver and front passenger seat belts are equipped with a seat belt pre-tensioner system.
Page 54: Srs Warning
The seat belt pre-tensioner system is designed to work only once. After the seat belt pre-tensioners have been activated, they will not work again. They must promptly be replaced and the entire seat belt pre-tensioner system inspected by an authorized Mitsubishi Motors dealer. 2-23...
Page 55: Child Restraint Systems
Seat and restraint systems Child restraint systems Guidelines for child restraint system selection N00407100613 All children should be properly restrained in a restraint device When transporting infants or small children in your vehicle, an that offers the maximum protection for their size and age. appropriate child restraint system must always be used.
Page 56 Seat and restraint systems WARNING WARNING Any child who is too large to use a child restraint Never hold an infant or child in your arms or on system should ride in the rear seat and wear the lap your lap when riding in this vehicle, even when you and shoulder belt properly.
Page 57 Seat and restraint systems WARNING WARNING Your vehicle is also equipped with a front passenger FRONT-FACING CHILD RESTRAINT SYS- airbag. TEMS should be used in the rear seat whenever pos- Never put REAR-FACING CHILD RESTRAINT sible. If they must be used in the front passenger SYSTEMS or INFANT RESTRAINT SYSTEMS in seat, move the seat to the most rearward position the front passenger seat.
Page 58 Seat and restraint systems NOTE WARNING Before purchasing a child restraint system, try installing it It is important to use an approved rear-facing infant in the rear seat to make sure there is a good fit. Because of restraint until the infant is one year old (unless the the location of the seat belt buckles and the shape of the infant outgrows the seat sooner).
Page 59 Seat and restraint systems Installing a child restraint system using the Tether anchor locations LATCH (Lower Anchors and Tethers for chil- N00418900129 Your vehicle has 3 attachment points on the rear shelf, located dren) system behind the top of your rear seat. These are for securing a child N00418800102 restraint system tether strap to each of the 3 rear seating posi- Lower anchor locations...
Page 60 Seat and restraint systems Examples of child restraint systems compatible with the Using the LATCH system LATCH system N00419100157 1. In order to securely fasten the tether strap, remove the N00419000185 head restraint from the location where you wish to install the child restraint system.
Page 61 Seat and restraint systems NOTE 3. Open the cover for the tether anchor by pulling it back In order to secure a child restraint system compatible with with your hand as illustrated below (3). the LATCH system, use the lower anchor points in the 4.
Page 62 Seat and restraint systems Installing a child restraint system using the seat Installation belt (with emergency/automatic locking mecha- 1. Place the child restraint system in the rear seating posi- tion. nism) 2. Route the seat belt through the child restraint system N00407300367 With the exception of the driver, the seat belt in all other seat- according to the instructions provided by the child...
Page 63 Seat and restraint systems 3. To activate the ALR child restraint installation function, 5. After confirming that the belt is locked, grab the shoulder slowly pull the shoulder part of the belt all the way out of part of the belt near the buckle and pull up to remove any the retractor until it stops.
Page 64 Seat and restraint systems 6. Open the cover from the tether anchor installation point 9. Before putting your child in the restraint, push and pull by pulling it back with your hand as illustrated below (6). the restraint in all directions to be sure it is firmly secured. Do this before each use.
Page 65: Maintenance And Inspection Of Seat Belts
Mitsubishi Motors dealer. Failure to Children can die from heat stroke if left or trapped have an authorized Mitsubishi Motors dealer per- inside the vehicle, especially on hot days. form the work could reduce the effectiveness of the...
Page 66 Seat and restraint systems Supplemental Restraint System (SRS) - The SRS airbags are NOT a substitute for use of the seat belts. For maximum protection in all types of accidents, seat belts airbag must ALWAYS be worn by everyone who drives or rides in N00407700619 this vehicle (with infants and small children in an appropriate This vehicle is equipped with a Supplemental Restraint System...
Page 67 Seat and restraint systems WARNING WARNING IT IS VERY IMPORTANT TO BE PROPERLY Airbags inflate very quickly and with great force. SEATED. Do not sit on the edge of the seat or sit with your • A driver or front passenger sitting too close to the lower legs too close to the instrument panel, or lean steering wheel or instrument panel during airbag your head or chest close to the steering wheel or the...
Page 68 Seat and restraint systems WARNING WARNING Infants and small children should never ride unre- NEVER put REAR-FACING CHILD RESTRAINT strained, or lean against the instrument panel. They SYSTEMS or INFANT RESTRAINT SYSTEMS in should never ride held in your arms or on your lap. the front passenger seat.
Page 69 Seat and restraint systems WARNING WARNING FRONT-FACING CHILD RESTRAINT SYS- Older children should be seated in the rear seat with TEMS should be used in the rear seat whenever pos- their seat belt properly worn, and with an appropri- sible. If they must be used in the front passenger ate booster seat (including a booster cushion) if seat, move the seat to the most rearward position needed.
Page 70 Seat and restraint systems How the Supplemental Restraint System works N00407800405 The SRS includes the following components: 10- Side airbag modules (if so equipped) 11- Curtain airbag modules (if so equipped) 12- Side impact sensors (if so equipped) 1- Driver’s airbag The airbag control unit monitors the readiness of the electronic 2- SRS warning light parts of the system whenever the ignition switch is in the “ON”...
Page 71: Event Data Recording
Seat and restraint systems Event Data Recording When the impact sensors detect a sufficient front or side impact to deploy the airbag(s), the appropriate airbag(s) will be N00418600171 Your vehicle is equipped with an “EDR” - Event Data deployed. Recorder which is capable of collecting and storing data in the When airbags deploy, some smoke is released accompanied by event of an airbag deployment.
Page 72 • Adjust the seat to the correct position, and sit well immediately have your vehicle inspected by an autho- back against the seatback. rized Mitsubishi Motors dealer as soon as possible: Refer to “Front seats” on page 2-3. • The SRS warning does not initially come on when •...
Page 73 66 pounds (30 kg) or greater, the indicator goes out to show that the passenger’s front airbag is opera- If the vehicle is involved in a severe impact, have the tional. SRS sensors inspected by an authorized Mitsubishi Motors dealer as soon as possible. 2-42...
Page 74 Warning light If any of the following conditions occur, you should immediately have the airbag system in your vehicle inspected by an authorized Mitsubishi Motors dealer as soon as possible: Warning display type 1 • The passenger’s airbag off indicator comes on when an adult is sitting on the front passenger seat.
Page 75 The driver’s airbag and the front passenger’s airbag are not function properly in a collision. Have your vehi- designed to deploy at the same time. However, the front pas- cle checked by an authorized Mitsubishi Motors senger’s airbag does not deploy when the front passenger seat dealer: is not occupied or when the weight sensor in the front passen- •...
Page 76 Seat and restraint systems Driver’s knee airbag system N00404500010 The driver’s knee airbag is located under the steering wheel. The driver’s knee airbag is designed to deploy at the same time as the driver’s front airbag. 2-45...
Page 77 Seat and restraint systems Deployment of front airbags N00408000521 The front airbags and driver’s knee airbag ARE DESIGNED TO DEPLOY when… Head-on collision with a solid wall at Moderate to severe frontal impact within speeds of approx. 15 mph (25 km/h) or the shaded area between the arrows higher The front airbags and driver’s knee airbag are designed to...
Page 78 Seat and restraint systems The front airbags and driver’s knee airbag MAY NOT Collision with a utility pole, tree or other narrow objects DEPLOY when … In certain types of front collisions, the front airbags and driver’s knee airbag may not deploy, even if the deformation of the body seems to be large, because the vehicle’s body struc- ture is designed to absorb the impact and deform in order to help protect the occupants.
Page 79 Seat and restraint systems The front airbags and driver’s knee airbag ARE NOT Rear end collision to your vehicle DESIGNED TO DEPLOY when … The front airbags and driver’s knee airbag are not designed to deploy in situations where they cannot provide protection to the occupants.
Page 80 Seat and restraint systems The front airbags and driver’s knee airbag MAY Collision with an elevated median/island or curb DEPLOY when … The front airbags and driver’s knee airbag may deploy if the underside of the vehicle suffers a moderate to severe impact (undercarriage impact).
Page 81 Seat and restraint systems WARNING WARNING Do not attach anything to the steering wheel’s pad- Do not attach accessories to, or put them in front of, ded cover, such as trim material, badges, etc. These the windshield. They could restrict the airbag infla- could strike and injure an occupant if the airbag tion, or strike and injure an occupant, when the inflates.
Page 82 The airbag system is designed to work only once. After the airbags deploy, they will not work again. They must promptly be replaced and the entire airbag system must be inspected by an authorized Mitsubishi Motors dealer. RECARO seats 2-51...
Page 83 Seat and restraint systems Curtain airbag system A label is attached to the seatbacks in vehicles with side (if so equipped) airbags. N00419200145 The curtain airbags are contained in the front and rear pillars Except for RECARO seat and roof side rail. The curtain airbag is designed to inflate only on the side of the vehicle that is impacted, even with no passen- ger in the front seat.
Page 84 Seat and restraint systems WARNING WARNING The side airbag and curtain airbag can cause serious In order to reduce the risk of injury from a deploy- injury or death to anyone too close to the airbag ing side airbag, do not allow any rear seat passen- when it deploys.
Page 85 Seat and restraint systems WARNING WARNING Do not attach a microphone (A) or any other object Do not put a hanger or any heavy or pointed object around the part where the curtain airbag (B) on the coat hook. If the curtain airbag was activated, deploys, such as on the windshield, side door glass or any such item could be propelled away with great front and rear pillars and roof side rail.
Page 86 The side airbag and curtain airbag ARE DESIGNED and curtain airbag system components should be TO DEPLOY when … done only by an authorized Mitsubishi Motors A side airbag and curtain airbag are designed to deploy when dealer. Improper work methods can cause acciden-...
Page 87 Seat and restraint systems The side airbag and curtain airbag MAY NOT Side impact in an area away from the passenger compartment DEPLOY when … In certain types of side collisions, the side airbag and curtain airbag may not deploy, even if the deformation of the body seems to be large, because the vehicle’s body structure is designed to absorb the impact and to deform in order to help protect the occupants.
Page 88 Seat and restraint systems The side airbag and curtain airbag ARE NOT Oblique side impact DESIGNED TO DEPLOY when … The side airbag and curtain airbag are not designed to deploy in situations where they cannot provide protection to the occu- pants.
Page 89 If you decide to junk or scrap your vehicle, we urge you to replacement of the steering wheel, or modifications first take it to an authorized Mitsubishi Motors dealer so to the front bumper or body structure can adversely that the SRS can be made safe for disposal.
Page 90 Cypress, CA 90630-0064 [For vehicles sold in Saipan] [For vehicles sold in Canada] To contact Triple J Motors To contact Mitsubishi Motor Sales of Canada, Inc. call (670) 234-7133 or write to: call 1-888-576-4878 or write to: Triple J Motors Mitsubishi Motor Sales of Canada, Inc.
Page 91: Warning Labels
Seat and restraint systems Warning labels N00408600341 Occupant restraint warning labels for the SRS are located in the vehicle as shown in the illustration. * - Located in the passenger’s side as well. 2-60...
Page 92: Features And Controls
Features and controls Break-in recommendations ......3- Anti-lock braking system (if so equipped) ....3- 134 Keys .
Page 93: Break-In Recommendations
Features and controls Break-in recommendations Keys N00508700297 N00508800520 Advanced automobile manufacturing techniques permit you to Type 1 operate your new vehicle without requiring a long break-in Two keys are provided. The keys fit all locks. period of low-speed driving. Keep one in a safe place as a spare key. However, you can add to the future performance and economy of your vehicle by observing the following precautions during the first 300 miles (500 km).
Page 94 Features and controls Type 2 Type 3 Two keys are provided. The keys fit all locks. Two Free-hand Advanced Security Transmitter (F.A.S.T.-key) Keep one in a safe place as a spare key. and two emergency keys are provided. Keep one F.A.S.T.-key and one emergency key in a safe place together as a set of spare keys.
Page 95 If you lose your key, to prevent the theft of the vehicle immediately contact an authorized Mitsubishi Motors dealer. If you notify an authorized Mitsubishi Motors dealer of the key number, they can make a new key. The key num- ber is stamped on the key number plate. Keep the key...
Page 96: Electronic Immobilizer
Features and controls Electronic immobilizer [Except for vehicles equipped with the Free-hand Advanced Security Transmitter (F.A.S.T.-key)] (Anti-theft starting system) The electronic immobilizer is designed to significantly reduce N00509100689 the possibility of vehicle theft. The purpose of the system is to [For vehicles equipped with the Free-hand Advanced Security immobilize the vehicle if an invalid start is attempted.
Page 97 In cases like the above, move the offending object(s) away from the key and turn the key back to the “ACC” or “LOCK” position. Then try to start the engine again. If the engine does not start, contact an authorized Mitsubishi Motors dealer.
Page 98: Additional Keys
Registering the ID code can be done by your authorized Do not make any alterations or additions to the Mitsubishi Motors dealer. Or it can be done by yourself (except immobilizer system. Alterations or additions could for vehicles sold in Canada).
Page 99 (already registered) keys and blank (not registered) immobi- • the immobilizer display goes off during the procedure lizer key (specially cut for your vehicle at your Mitsubishi • the immobilizer display does not come on within 30 sec- Motors dealer) by doing the following: onds after turning the ignition switch to the “ON”...
Page 100: Keyless Entry System (If So Equipped)
Features and controls Keyless entry system General information (if so equipped) Your electronic immobilizer operates on a radio frequency sub- N00509000763 ject to Federal Communications Commission (FCC) Rules Press the remote control transmitter buttons to lock or unlock (For vehicles sold in U.S.A.) and Industry Canada Rules (For the doors and to open the trunk lid.
Page 101: To Unlock The Doors
Two chimes The horn will sound. NOTE The horn will sound if the LOCK button is On a vehicle equipped with a Mitsubishi Multi-Communi- Four chimes pressed twice quickly. cation System, the functions can be adjusted on the screen. For details, refer to a separate operation manual.
Page 102 Features and controls NOTE 4. Release in sequence the UNLOCK and LOCK buttons On a vehicle equipped with a Mitsubishi Multi-Communi- within 10 seconds of pressing the LOCK button in step 3. cation System, the functions can be adjusted on the NOTE screen.
Page 103 Registering the ID code can be done by yourself or by your authorized Mitsubishi Motors dealer. For you to register the ID code yourself, follow the “Customer remote control transmitter programming” procedure below. If you choose to have your authorized Mitsubishi Motors dealer register the ID code, take your vehicle and all remaining keys to your authorized Mitsubishi Motors dealer.
Page 104 On a vehicle equipped with a Mitsubishi Multi-Communi- 4. Within 60 seconds after step 3, complete the following ID cation System, the functions can be adjusted on the code registration operation using the next remote control screen.
Page 105: General Information
Be sure to perform the procedure with the Mitsubishi Changes or modifications not expressly approved by mark facing you. If the Mitsubishi mark is not facing you the manufacturer for compliance could void the when you open the remote control transmitter case, the user’s authority to operate the equipment.
Page 106 7. Check the keyless entry system to see that it works. NOTE You may purchase a replacement battery at an electric appliance store. Your authorized Mitsubishi Motors dealer can replace the battery for you if you prefer. 3-15...
Page 107: Free-Hand Advanced Security Transmitter
Features and controls Free-hand Advanced Security Transmitter CAUTION (F.A.S.T.-key) (if so equipped) When the remote control transmitter case is opened, N00503100052 be careful to keep water, dust, etc. out. Also, do not The Free-hand Advanced Security Transmitter (F.A.S.T.-key) touch the internal components. enables the doors to be locked and unlocked, the trunk lid to be opened, and the engine to be started simply by carrying it.
Page 108 The operations possible with the F.A.S.T.-key can be modified as stated below. (Keyless entry operations are possible.) For details, contact an authorized Mitsubishi Motors dealer. • Enabling only the locking and unlocking of the doors and the opening of the trunk lid •...
Page 109 Features and controls Operating range of the F.A.S.T.-key NOTE The F.A.S.T.-key uses weak electromagnetic waves. N00503200082 When a person enters the operating range of the F.A.S.T.-key In cases such as the following, operation may be improper while carrying the F.A.S.T.-key and operates a switch or handle or unstable.
Page 110 Features and controls Operating range for locking and unlocking the doors NOTE and for opening the trunk lid Only the F.A.S.T.-key that is detectable by the doors and the trunk lid can lock and unlock the doors and open the The operating range is within about 2.3 feet (70 cm) of the han- trunk lid.
Page 111 Features and controls To operate using the F.A.S.T.-key Operating range for starting the engine N00503300025 N00503400101 The operating range is the interior of the vehicle. To lock the doors While carrying the F.A.S.T.-key, press the LOCK switch (A) of the driver’s door or front passenger door within the operating range to lock all the doors.
Page 112 If the handle is operated 3 seconds or more after the vehi- cle is locked, the doors are unlocked again. The time within which locking confirmation is possible can be adjusted. See an authorized Mitsubishi Motors dealer for details. NOTE...
Page 113 • The emergency key is inserted into the ignition switch The doors cannot be unlocked for about 3 seconds after locking. The time within which locking confirmation is possible can be adjusted. See an authorized Mitsubishi Motors dealer for details. 3-22...
Page 114 The amount of time after unlocking until the vehicle re- locks automatically can be adjusted. See an authorized Mitsubishi Motors dealer for details. On a vehicle equipped with a Mitsubishi Multi-Communi- cation System, the functions can be adjusted on the screen. For details, refer to a separate operation manual.
Page 115: Ignition Switch
Features and controls Ignition switch The engine runs and all electrical accessories can be used. N00513500059 To prevent vehicle theft, no F.A.S.T.-keys other than those reg- START istered in advance can be used to start the engine. (Electronic Engages the starter. Release the ignition switch when the immobilizer function) engine starts.
Page 116 Features and controls To turn from “LOCK (PUSH OFF)” to “ACC” To turn from “ACC” to “LOCK” N00513600021 N00513700051 Turn slowly after pressing the ignition switch. For vehicles with manual transaxle Slowly turn the ignition switch to the “LOCK” position while pressing it.
Page 117 Do not leave the ignition switch in the “ON” position If the following warning displays, contact an authorized for a long time when the engine is not running. Mitsubishi Motors dealer. Doing so could lead to a dead battery. Do not turn the ignition switch to the “START”...
Page 118 Features and controls If the following warning display, the display goes off if correc- A door cannot be locked even when the LOCK switch is tive action is taken. pressed The ID codes of the F.A.S.T.-key and the vehicle cannot Type 1 be verified Type 1...
Page 119 3 seconds. without opening a door. This setting can be changed. See an authorized Mitsubishi Motors dealer for details. The warning may display even if the F.A.S.T.-key is in the operating range for starting the engine. The surrounding environment or electromagnetic waves may make it impossible to verify the ID codes of the F.A.S.T.-key and...
Page 120 Features and controls Door ajar prevention system Ignition switch turn-off reminder system N00560000058 N00560100059 Type 1 Type 1 Type 2 Type 2 When the ignition switch is in the “LOCK (PUSH OFF)” posi- When the ignition switch is in a position other than “LOCK tion, and someone tries to lock the vehicle by pressing the (PUSH OFF)”, all the doors are closed, and someone tries to LOCK switch of the doors while one of the doors is not fully...
Page 121 Features and controls Steering wheel lock NOTE If the front wheels are turned, the anti-theft lock may N00514300025 sometimes make it difficult to turn the ignition switch from “LOCK” to “ACC” position. Firmly turn the steer- ing wheel to the left or to the right as you turn the ignition switch.
Page 122 Features and controls • If you shift the gearshift lever into the “N” (NEUTRAL) Starting the engine position and depress the accelerator pedal, increases in Your vehicle is equipped with an electronically controlled fuel the engine speed will be limited. injection system.
Page 123 Features and controls At extremely cold ambient temperature 3. On vehicles with manual transaxle, place the gearshift If the engine won’t start, press the accelerator pedal about half- lever in the “N” (Neutral) position. way down while cranking the engine. Release the accelerator On vehicles with continuously variable transmission pedal when the engine starts.
Page 124 Release the ignition switch if the engine starts. Repeat as nec- gency key can be used to lock and unlock the doors and to start essary. Contact your Mitsubishi Motors dealer or a repair facil- the engine. ity of your choice for assistance.
Page 125 Features and controls Ignition switch NOTE Only use the emergency key in an emergency. When the N00529300108 To prevent vehicle theft, only the emergency key with the pre- battery of the F.A.S.T.-key has run down, replace the bat- registered F.A.S.T.-key inserted can start the engine. (Elec- tery as soon as possible and use it as a F.A.S.T.-key again.
Page 126 Features and controls START To turn from “LOCK” to “ACC” Engages the starter. Release the emergency key when the 1. Remove the emergency key from the F.A.S.T.-key. engine starts. The ignition switch returns automatically to the Refer to “Emergency key” on page 3-33. “ON”...
Page 127 Features and controls To turn from “ACC” to “LOCK” 3. Insert the emergency key into the ignition switch, and slowly push and turn. 1. [For vehicles with manual transaxle] Push the emergency key in at the “ACC” position and keep it depressed until it is turned to the “LOCK” posi- tion, and remove.
Page 128 Features and controls Steering wheel lock 2. Install the cover of the ignition switch. 3. Reinsert the emergency key into the F.A.S.T.-key. NOTE Always install the cover of the ignition switch when not using the emergency key. Not doing so could cause dam- age if foreign material such as dust gets into the keyhole of the ignition switch.
Page 129 Features and controls NOTE WARNING If the front wheels are turned, the anti-theft lock may sometimes make it difficult to turn the emergency key Never run the engine in a closed or poorly ventilated from “LOCK” to “ACC”. Firmly turn the steering wheel area any longer than is needed to move your vehicle to the left or to the right as you turn the emergency key.
Page 130 Features and controls Normal conditions 2. Insert the emergency key into the ignition switch. To start the engine: Make sure all occupants are properly seated with seat belts fas- tened. 1. While pushing the lock release buttons (A), remove the cover of the ignition switch.
Page 131 Features and controls 4. Press and hold the brake pedal down with your right foot. 8. Turn the emergency key with the F.A.S.T.-key to the “START” position without pressing the accelerator pedal. 5. Press and hold the clutch pedal all the way down (manual Release the emergency key with the F.A.S.T.-key when transaxle).
Page 132 When starting the engine, make sure you depress if the engine starts. Repeat as necessary. Contact your the brake pedal. If you start the engine with the Mitsubishi Motors dealer or a repair facility of your choice for accelerator pedal depressed, move your foot to the assistance.
Page 133 Registering the ID code can be done by your authorized the possibility of vehicle theft. The purpose of the system is to Mitsubishi Motors dealer. Or it can be done by yourself (except immobilize the vehicle if an invalid start is attempted. A valid for vehicles sold in Canada).
Page 134 (already registered) F.A.S.T.-keys, blank (not regis- tered) F.A.S.T.-key and emergency key (specially cut for your vehicle at your Mitsubishi Motors dealer). To use the new F.A.S.T.-key, it is necessary to register the key with both the electronic immobilizer and keyless entry system.
Page 135 Features and controls NOTE 5. Turn the emergency key with the F.A.S.T.-key to the Perform the operation when the interrupt display screen is “ON” position for 5 seconds. not showing. The interrupt display screen may prevent 6. Turn the emergency key with the F.A.S.T.-key to the you from seeing the immobilizer display.
Page 136: Keyless Entry System
30 seconds. Refer to “Welcome light” on page 3-222. NOTE On a vehicle equipped with a Mitsubishi Multi-Communi- 1- LOCK ( cation System, the functions can be adjusted on the ) button screen.
Page 137 NOTE This is done with the key removed from the ignition switch. On a vehicle equipped with a Mitsubishi Multi-Communi- NOTE cation System, the functions can be adjusted on the The answerback function does not operate when the key is screen.
Page 138 NOTE Two chimes Driver’s door unlock only On a vehicle equipped with a Mitsubishi Multi-Communi- cation System, the functions can be adjusted on the 1. Turn the ignition switch to the “LOCK” position. If you screen. For details, refer to a separate operation manual.
Page 139 F.A.S.T.-keys. Registering the ID code can be done by your authorized Mitsubishi Motors dealer. Or it can be done by yourself (except for vehicles sold in Canada). For you to register the ID code yourself, follow the “Customer F.A.S.T.-key programming”...
Page 140 (already registered) F.A.S.T.-keys, blank (not regis- tered) F.A.S.T.-key and emergency key (specially cut for your vehicle at your Mitsubishi Motors dealer). To use the new F.A.S.T.-key, it is necessary to register the key with both the electronic immobilizer and keyless entry system.
Page 141 4 to 10 seconds and press the LOCK button during the doors will automatically re-lock. this time. On a vehicle equipped with a Mitsubishi Multi-Communi- 8. Release in sequence the LOCK and UNLOCK buttons cation System, the functions can be adjusted on the within 10 seconds of pressing the LOCK button in step 7.
Page 142 NOTE Be sure to perform the procedure with the Mitsubishi mark facing you. If the Mitsubishi mark is not facing you when you open the remote control transmitter case, the transmitter may come out.
Page 143: Door Locks
Never leave children unattended inside a vehicle. In appliance store. addition to the risk of heat stroke, children can acti- Your authorized Mitsubishi Motors dealer can replace the vate switches and controls, resulting in an injury or battery for you if you prefer.
Page 144 Features and controls To lock or unlock the front doors with the key To lock or unlock the door from the inside Turn the key toward the front of the vehicle to lock the door. Move the lock knob to the lock position to lock the door. After checking that the door is locked, turn the key back to the All doors should be kept locked while driving.
Page 145 Features and controls To lock the door without using the key Key reminder system 1. Move the inside lock knob to the locked position. N00549600178 When a key was used to start the engine 2. Be sure the keys are not inside the vehicle. Close the door. Type 1 Type 2 If the ignition switch is turned off and the driver’s door is...
Page 146: Power Door Locks
Features and controls Power door locks Ignition switch return reminder system N00503800059 N00509300519 When the F.A.S.T.-key was used to start the engine NOTE Type 1 Repeated continuous operation between lock and unlock could activate the power door locking systems built-in protection circuit and prevent the system from operating.
Page 147 When the power window lock switch is in the lock mode, the door unlocking function will be deactivated. Refer to “Power windows: Lock switch” on page 3-70. Please consult an authorized Mitsubishi Motors dealer. Using the ignition switch position 1- Insert or remove the emergency key.
Page 148 “ON” position. Vehicles with CVT NOTE On a vehicle equipped with a Mitsubishi Multi-Communi- cation System, the functions can be adjusted on the screen. For details, refer to a separate operation manual. 3-57...
Page 149: Child Safety Locks" For Rear Door
Features and controls “Child safety locks” for rear door WARNING N00509400190 Always keep the doors tightly closed and locked when driving. An unlocked door may be acciden- tally opened by a passenger, especially by a child who could fall out. Also, if the doors are not locked, there is a greater risk of someone being thrown from the vehicle in an accident.
Page 150: Trunk Lid
Features and controls Trunk lid To open N00509500175 Operation from outside the vehicle WARNING Using the key (Vehicles with key cylinder) Insert the key and turn it clockwise. It is dangerous to drive with the trunk lid open since The trunk lid will pop up slightly. Lift it to open the trunk. carbon monoxide (CO) gas can enter the cabin.
Page 151 Features and controls Operation from inside the vehicle NOTE The trunk area light comes on when the trunk lid is opened, and goes out when it is closed. The trunk area light remains illuminated for a certain period and then goes off automatically. Refer to “Interior light auto-cutout function (dome light and other lights)”...
Page 152 Features and controls To close NOTE Gas struts (A) are installed in the locations illustrated to Pull the trunk lid downward as illustrated. Gently slam the support the trunk lid. Please observe the following in trunk lid from the outside so that it is completely closed. order to prevent damage or faulty operation.
Page 153: Inside Emergency Trunk Lid Release
Features and controls Inside emergency trunk lid release You and your family should familiarize yourselves with the location and operation of the emergency trunk lid release lever. N00509800165 Children should be taught not to play in or around vehicles. The emergency trunk lid release is designed to provide a way to open the trunk lid from inside the trunk.
Page 154: Theft-Alarm System (If So Equipped)
Features and controls Theft-alarm system To open the trunk from the inside, move the lever (A) in the (if so equipped) direction of the arrow on the lever. Push up on the trunk lid to N00510200130 open the trunk and climb out. The theft-alarm system is designed to provide protection from unauthorized entry into the vehicle.
Page 155 Features and controls At this time, the theft-alarm indicator (A) on the audio NOTE panel flashes for confirmation. The system will be disarmed if, while the theft-alarm indi- cator (A) is illuminated, all doors are unlocked by remote control transmitter, the F.A.S.T.-key. The system will be disarmed if, while the theft-alarm indi- cator is illuminated, the ignition switch is turned to “ON”...
Page 156 Features and controls Alarm stage NOTE The alarm will continue to operate for 3 minutes. At the While the vehicle is parked and the system is armed, the alarm end of that period, the alarm will automatically shut off to will be activated if one of the doors or a trunk lid is opened save battery power.
Page 157 Features and controls Disarmed stage Testing the theft-alarm system The system will be disarmed when either of the following steps Use the following procedure to test the system: are taken: 1. Lower the driver’s window. 1. All doors are unlocked by the remote control transmitter, 2.
Page 158: Power Windows
Features and controls Power windows WARNING N00510800367 Before operating the power windows, make sure that nothing can be trapped (head, hands, fingers, etc.) in the window. Never leave the vehicle with the key in the ignition switch. Never leave a child alone in the vehicle. Main switch The main switch located on the driver’s door can be used to operate all door windows.
Page 159 Features and controls Sub switch 1- Driver’s door window switch 2- Front passenger door window switch 1- Close (up) 3- Left rear door window switch 2- Open (down) 4- Right rear door window switch Each sub switch can be used for its own passenger door win- 5- Window lock switch dow, unless the driver’s window lock switch is activated.
Page 160 Features and controls Timer function Safety mechanism (Driver’s door window only) The power windows can be run up or down when the ignition so equipped) switch is in the “ON” position. N00528800021 If a hand or head is trapped, for safety the door window is auto- The door windows can be opened or closed for a 30 second matically lowered a little.
Page 161 Features and controls Lock switch NOTE The safety mechanism can be activated if the driving con- N00549000127 When this switch is in the lock mode, the main switch for pas- ditions or other circumstances cause the door window to senger door window and the sub switch cannot be used to open be subjected to a physical shock similar to that caused by or close the door window, and the main switch will open or trapped hand or head.
Page 162 Features and controls Sunroof What to do if you hear wind buffeting when driv- (if so equipped) N00511000555 N00551400014 WARNING Wind buffeting can be described as the perception of pressure on the ears or a booming or rumbling sound. Your vehicle may Do not stick your head, hands or anything else in the exhibit wind buffeting when driving with one or both rear door sunroof opening.
Page 163 Features and controls To open Safety mechanism Press the switch (1), the sunroof automatically opens and the If a hand or head is trapped in the closing sunroof opening, the sunroof will stop several centimeters this side of the full open safety mechanism will cause the sunroof to re-open automati- position.
Page 164 Features and controls Sunshade CAUTION The sunshade can be opened or closed manually while the The safety mechanism is deactivated just before the sunroof is closed. sunroof closes. This allows the sunroof to close com- When the sunroof is opened, the sunshade will also open auto- pletely.
Page 165: Parking Brake
If nothing is trapped, have the sunroof checked at an authorized Mitsubishi Motors dealer. Be careful when tilting up the sunroof if a ski carrier or a roof carrier is installed.
Page 166 Features and controls To apply To release 1- Pull the lever up without pushing the button at the end of 1- Pull the lever up slightly. hand grip. 2- Push and hold the button at the end of the hand grip. When the parking brake is set and the ignition switch is in 3- Push the lever downward.
Page 167: Steering Wheel Tilt Lock Lever
Features and controls Steering wheel tilt lock lever CAUTION N00511500215 Before driving, be sure that the parking brake is To adjust the steering wheel height, release the tilt lock lever fully released and brake warning light is off. while holding the steering wheel by hand, and raise or lower If you drive without the parking brake fully the steering wheel to the desired height.
Page 168 Features and controls Inside day/night rearview mirror WARNING N00511600203 After adjusting, make sure the lock lever is secured Adjust the inside rearview mirror only after making any seat in the locked (1) position. adjustments so as to have a clear view to the rear of the vehicle. Do not attempt to adjust the steering wheel while WARNING driving.
Page 169 Features and controls Inside day/night rearview mirror To adjust the vertical mirror position It is possible to move the mirror up and down to adjust its posi- Adjust the inside mirror to maximize the view through the rear tion. window. To adjust the mirror position It is possible to move the mirror vertically and horizontally to adjust its position.
Page 170: Outside Rearview Mirrors
Features and controls Outside rearview mirrors To reduce the glare The day/night knob (A) at the bottom of the mirror can be used N00512200192 to adjust the mirror to reduce the glare from the headlights of Adjust the outside rearview mirrors only after making any seat vehicles behind you during night driving.
Page 171 Features and controls To adjust the mirror position To fold the mirror The outside rearview mirrors can be adjusted when the ignition The outside mirror can be folded in toward the side window to switch is in the “ON” or “ACC” position. prevent damage when parking in tight locations.
Page 172 Features and controls Ignition switch Heated mirror (if so equipped) N00549300175 N00512400615 When the rear window defogger switch is pressed with the [For vehicles equipped with the F.A.S.T.-key] engine running, the outside rearview mirrors are defogged or For information on operations for vehicles equipped with the defrosted.
Page 173 • The time until the power cuts out can be changed to about 60 minutes. • The ACC power auto-cutout function can be deacti- vated. For details, consult a Mitsubishi Motors dealer. On vehicles equipped with Mitsubishi Multi-Communica- tion System, screen operations can be used to make the adjustment.
Page 174 Features and controls To remove the key For vehicles with a continuously variable transmission (CVT) or Twin Clutch SST, when removing the key, first set the selec- N00550900155 For vehicles with a manual transaxle, when removing the key, tor lever (CVT) or the gearshift lever (Twin Clutch SST) to the push the key in at the “ACC”...
Page 175: Steering Wheel Lock
Features and controls Steering wheel lock CAUTION N00512500153 Do not remove the ignition key from the ignition [For vehicles equipped with the F.A.S.T.-key] switch while driving. The steering wheel will lock, For information on operations for vehicles equipped with the causing loss of control.
Page 176: Starting And Stopping The Engine
Features and controls Starting and stopping the engine CAUTION N00542100060 Remove the key when leaving the vehicle. Tips for starting Do not operate the starter motor continuously for longer NOTE than 15 seconds as this could run the battery down or If the front wheels are turned, the anti-theft lock may damage the starter motor.
Page 177 Features and controls Starting the engine On vehicles equipped with the Twin Clutch SST, the fol- lowing may occur after the engine is started, but they do N00542200058 [For vehicles equipped with the F.A.S.T.-key.] not indicate an abnormality. For information on operations for vehicles equipped with the •...
Page 178 Features and controls At extremely cold ambient temperature 5. On vehicles with manual transaxle, place the gearshift lever in the “N” (Neutral) position. If the engine won’t start, press the accelerator pedal all the way On vehicles with continuously variable transmission down while cranking the engine.
Page 179 Repeat as necessary if the engine fails to start, then move the gearshift lever to the 1st (on a uphill) or or contact your local Mitsubishi Motors dealer or a repair facil- “R” (Reverse) (on a downhill) position.
Page 180 Features and controls For vehicles with Twin Clutch SST, if the temperature NOTE inside the engine compartment is high, the cooling fans For vehicles with Twin Clutch SST, the engine will stop (A) will continue to operate for some time even if the and the vehicle power will turn off approximately 1 sec- engine is stopped.
Page 181: Turbocharger Operation (If So Equipped)
Features and controls Turbocharger operation Turbocharger (if so equipped) The turbocharger increases engine power by pushing large N00537300051 amounts of air into the engine’s cylinders. The finned parts CAUTION inside the turbocharger turn at extremely high speeds and are subjected to extremely high temperatures. They are lubricated Do not run the engine at high speeds (for example, by engine oil and cooled by engine oil and coolant.
Page 182 Features and controls Manual transaxle To start (if so equipped) Press the clutch pedal all the way down and shift into 1st. Then N00512700083 The shift pattern below is shown on the gearshift lever. Press gradually release the clutch pedal while depressing the acceler- the clutch pedal all the way down while shifting gears.
Page 183 Features and controls Upshifting Downshifting N00512900131 N00513000096 For the best fuel economy and performance in using your man- It is recommended that you downshift to a lower gear when ual transaxle, upshift as listed below. needed to maintain the desired speed, according to the table. Avoid downshifting at too high a speed.
Page 184: Driving Precautions
Features and controls Continuously variable transmission (CVT) Driving precautions N00513100172 (if so equipped) The table below shows the maximum recommended driving N00513200186 speed for in each gear. Do not drive near or at these speeds for The CVT is capable of changing the engine speed to vehicle prolonged periods of time.
Page 185: Selector Lever Operation
Features and controls Selector lever operation Except for vehicles with sports mode The CVT has 2 forward selector positions and 1 reverse selec- N00513800342 As an additional safety precaution, models equipped with a tor position. continuously variable transmission have a shift-lock device The CVT selects an optimum ratio automatically when the that holds the selector lever in the “P”...
Page 186 Features and controls NOTE To ensure proper transmission operation, stop at each detent position when shifting. After shifting, check the position in the multi-information display. If the brake pedal is not depressed and held, the shift-lock device activates to prevent the selector lever from being moved from the “P”...
Page 187 Features and controls Vehicles with sports mode The CVT has 2 forward selector positions and 1 reverse selec- tor position. The CVT selects an optimum ratio automatically when the selector lever is in the “D” (DRIVE) position, depending on the speed of the vehicle and the position of the accelerator pedal.
Page 188 Immediately have your vehicle checked by an authorized brake pedal before moving the selector lever. If you Mitsubishi Motors dealer or a repair facility of your choice. attempt to move the selector lever before depressing the If you need to move the vehicle, shift the selector lever as fol- brake pedal, the selector lever will be immovable.
Page 189 Features and controls Selector lever position display 4. Depress the brake pedal with the right foot. 5. Turn the ignition switch to the “ACC” position. N00513900330 When the ignition switch is turned to the “ON” position, the NOTE selector lever position is shown on the multi-information dis- For vehicles with the Free-hand Advanced Security play.
Page 190 It may be that there is something unusual happening in the CVT, causing a safety device to activate. Have your vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible.
Page 191 Features and controls Selector lever positions “N” NEUTRAL At this position, the transmission is disengaged. It is the same N00514200314 as the neutral position on a manual transaxle and should be “P” PARK used when the vehicle is not moving for an extended length of This position locks the transmission to prevent the vehicle time during driving, such as in a traffic jam.
Page 192 Features and controls Sports mode “D” DRIVE (if so equipped) This position is used for most city and highway driving. Engine N00514400374 Whether the vehicle is stationary or in motion, sports mode is shifting and braking are done automatically as needed, depend- selected by pushing the selector lever from the “D”...
Page 193 Features and controls CAUTION SHIFT UP By rapidly moving the selector lever or sportronic SHIFT steering wheel paddle shifter to the “- (SHIFT DOWN DOWN)” side twice, it is possible to skip one shift range (i.e., 3rd to 1st or 4th to 2nd). Since sudden engine braking or acceleration can cause a loss of SHIFT traction, downshifts must be made carefully in...
Page 194 Features and controls Operation of the CVT Sports mode display N00538800082 N00514500274 In sports mode, the currently selected shift range is displayed CAUTION on the information screen in the multi-information display. Before selecting a position with the engine running and the vehicle stationary, fully depress the brake pedal to prevent the vehicle from creeping.
Page 195 Features and controls Passing acceleration Parking N00514900063 N00515100062 To gain extra acceleration in “D” (DRIVE) position (when To park the vehicle, first bring it to a complete stop, fully passing another vehicle) push the accelerator to the floor if it is engage the parking brake, and then move the selector lever to safe to do so in traffic conditions.
Page 196 Have your vehicle checked the smooth shifting of an automatic transaxle and the accelera- at an authorized Mitsubishi Motors dealer or a repair facility of tion and fuel economy close to a manual transaxle. In addition, your choice as soon as possible.
Page 197: Gearshift Lever Operation
Features and controls Gearshift lever operation The Twin Clutch SST has 6 forward gears and 1 reverse gear. The individual gears are selected automatically, depending on N00539800050 As an additional safety precaution, models equipped with a the position of the gearshift lever, the speed of the vehicle and Twin Clutch SST have a shift-lock device that holds the gear- the position of the accelerator pedal.
Page 198 Features and controls WARNING If the pull-ring is always pulled up when using the gearshift lever, the gearshift lever may be acciden- tally shifted into the “P” (PARK) or “R” (REVERSE) position. Do not pull up the pull-ring when making shifts shown by in the illustration.
Page 199: Gearshift Lever Position Display
Features and controls Gearshift lever position display In addition, when the vehicle is driven with the gearshift lever in the “D” (DRIVE) position, the forward gear number is N00539900064 When the ignition switch is turned to the “ON” position, the shown.
Page 200 3. Repeat 1 and 2 above if the gearshift lever position dis- vehicle cannot move, or if this problem occurs repeatedly, have play continues to blink. the vehicle checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. WARNING...
Page 201: Warning Display
If the display goes out, the vehicle can be driven normally. If the warning display remains on or comes on frequently, have the vehicle checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. CAUTION...
Page 202 However, if the warning display remains on or comes on fre- then open the engine hood with the engine running to cool quently, have the vehicle checked by an authorized Mitsubishi the engine. Motors dealer or a repair facility of your choice as soon as pos- 3.
Page 203 Features and controls Gearshift lever positions (Main shift gate) “N” NEUTRAL At this position, the transmission is disengaged. It is the same N00540100011 as the neutral position on a manual transaxle and should be “P” PARK used when the vehicle is not moving for an extended length of This position locks the transmission to prevent the vehicle time during driving, such as in a traffic jam.
Page 204 Features and controls Twin Clutch SST control mode “D” DRIVE This position is used for most city and highway driving. Engine N00540200070 Select the control mode from the following two types to suit shifting and braking are done automatically as needed, depend- the driving conditions.
Page 205 Features and controls Twin Clutch SST control mode switch NOTE When continuously driving on closed circuit tracks or at N00540300068 When the ignition switch is set to the “ON” position, operate other locations where the engine is operated at high the Twin Clutch SST control mode switch (A) to change the speeds and under a heavy load, the Twin Clutch SST fluid control mode.
Page 206 Features and controls To shift from “Normal” mode to “Sport” mode Twin Clutch SST control mode display While the vehicle is stopped or being driven, push the Twin N00540400043 When the ignition switch is set to the “ON” position, the cur- Clutch SST control mode switch forward.
Page 207: Manual Shift
Features and controls Manual shift CAUTION N00540500031 Using the gearshift lever (A) or the sportronic steering wheel When manually shifting while the vehicle is being shifters (B), shifting can be performed manually. driven, select the correct shift position to control the engine speed so that the tachometer indicator does not enter the red zone.
Page 208 Features and controls Shifting using the gearshift lever NOTE Only the forward gears 1 to 6 can be selected. N00540600029 To reverse or park, place the gearshift lever in the “R” Selecting manual shifting (REVERSE) or “P” (PARK) position. While the vehicle is stopped or being driven, move the gear- During manual shifting, downshifting will be performed shift lever from the “D”...
Page 209 Features and controls Shifting up and shifting down Returning to “D” range operation Each time the gearshift lever is pulled rearward, the transmis- Move the gearshift lever toward the front passenger’s seat to sion shifts up 1 gear. return to automated shifting. In addition, each time the gearshift lever is pushed forward, the transmission shifts down 1 gear.
Page 210 Features and controls Shifting using the sportronic steering wheel shifters Shifting up Each time the + (SHIFT UP) sportronic steering wheel shifter N00540700020 is pulled, the transmission shifts up 1 gear. Selecting manual shifting While the vehicle is stopped or being driven with the gearshift lever in the “D”...
Page 211 Features and controls Shifting down Returning to “D” range operation Each time the - (SHIFT DOWN) sportronic steering wheel When the gearshift lever is in the “D” (DRIVE) position, pull shifter is pulled, the transmission shifts down 1 gear. the + (SHIFT UP) sportronic steering wheel shifter toward you for 2 seconds or more to return to “D”...
Page 212 Features and controls Manual shift display NOTE If manual shifting is selected using the sportronic steering N00543000040 In manual shift, the currently selected gear is displayed on the wheel shifters when the gearshift lever is in the “D” multi-information display. (DRIVE) position, the transmission will automatically return to “D”...
Page 213 Features and controls Operation of the Twin Clutch SST Passing acceleration N00540900019 N00540800018 To gain extra acceleration in “D” (DRIVE) position (when CAUTION passing another vehicle) push the accelerator to the floor if it is safe to do so in traffic conditions. The Twin Clutch SST will Before selecting a position with the engine running automatically downshift.
Page 214 Features and controls Waiting CAUTION N00541000033 For short waiting periods, such as at traffic lights, the vehicle Do not use the tendency of the vehicle to creep for- can be left in gearshift lever position and held stationary with ward in order to drive at low speeds up hills. the service brake.
Page 215 Features and controls What to do if the following occur with the Twin Clutch CAUTION Do not keep the vehicle in a stopped position on an N00541200064 uphill slope by depressing the accelerator pedal If there is a malfunction in the Twin Clutch SST or engine elec- instead of the brake pedal.
Page 216: All-Wheel Drive System (If So Equipped)
However, if the vehicle does not move or accelerate normally, or if this problem occurs repeatedly, have the vehicle checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. CAUTION...
Page 217 Features and controls Cautions on handling of all-wheel drive CAUTION vehicles Always use tires of the same size, same type, and N00530800145 same brand, and which have no wear differences. Tires and wheels Using tires that differ in size, type, brands or the degree of wear, will increase the differential oil tem- Since driving torque can be applied to all four wheels, the per- perature, resulting in possible damage to the driving...
Page 218 Features and controls Towing Jacking up a all-wheel drive vehicles WARNING Do not start or run the engine while the vehicle is on the jack. The jack could slip out of position and result in an accident. CAUTION Do not tow all-wheel drive vehicles with the front or rear wheels on the ground (Type A or Type B) as illustrated.
Page 219: Acd (Active Center Differential System)
Features and controls ACD (Active center differential system) ACD control mode N00545400048 (if so equipped) Select the control mode from the following three types to suit the driving conditions. N00538500034 The ACD is a system that improves acceleration performance and straight-ahead stability by regulating the differential limit- ACD control Operation ing action and power drive distribution of the center differen-...
Page 220 Features and controls ACD control mode switch ACD control mode display When the ignition switch is set to the “ON” position, operate the AWC switch to change the control mode. Each time the switch is pushed, the control mode changes in the order “TARMAC”...
Page 221: Acd Warning Display
Features and controls ACD warning display CAUTION N00545700041 The system may be malfunctioning. When there is a malfunction in the system, the warning dis- Park your vehicle in a safe place and stop the engine. play will appear on the information screen in the multi-infor- mation display.
Page 222: Service Brake
Features and controls Limited-slip differential Service brake (if so equipped) N00517400069 N00517500262 A limited-slip differential is applied for rear wheel differential. Brake pedal The features of this limited-slip differential are described Overuse of the brake can cause poor brake response and pre- below: mature wear of the brake pads and linings.
Page 223: Power Brakes
If you hear this sound, have the brake pads replaced at an Your brakes are designed to operate at full capacity, even if the authorized Mitsubishi Motors dealer or a repair facility of your power assist is lost. choice.
Page 224: Hill Start Assist
Features and controls Hill start assist To operate (vehicles with Twin Clutch SST) N00562700033 1. Stop the vehicle completely using the brake pedal. N00562600032 2. Release the brake pedal and the hill start assist will main- The hill start assist makes it easy to start off on a steep uphill tain the braking force applied while stopping for approxi- slope by preventing the vehicle from moving backwards.
Page 225: Driving Hints
Do not pump the brake, which will result in quently, it is not necessary to stop the vehicle imme- reduced braking performance. diately, but the vehicle should be inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. 3-134...
Page 226 Never install a limited slip differential as the ABS may not function normally. Please consult an authorized Mitsubishi Motors dealer. Warning display type 2 NOTE...
Page 227 • The warning light comes on while driving or if they come on again when the vehicle is driven, have • The warning display appears while driving the vehicle checked by an authorized Mitsubishi Motors dealer or repair facility of your choice as soon as possible. 3-136...
Page 228 Avoid hard braking and high-speed driving. Stop the vehicle in a safe place and contact an authorized Mitsubishi Motors dealer or repair facility of your choice. NOTE The anti-lock braking system warning light and brake...
Page 229 Features and controls Active Stability Control (ASC) (if so equipped) Rear N00559100118 The Active Stability Control (ASC) takes overall control of the anti-lock braking system, traction control function and skid control function to help maintain the vehicle’s control and trac- tion.
Page 230 Features and controls Traction control function NOTE An operation noise may be emitted from the engine com- N00559200034 On slippery surfaces, the traction control function prevents the partment in the following situations. The sound is associ- drive wheels from spinning excessive, thus helping the vehicle ated with checking the operations of the ASC.
Page 231 Features and controls “ASC OFF” switch NOTE Using the “ASC OFF” switch turns off both the skid con- N00559400111 trol function and the traction control function. The ASC is automatically activated when the ignition switch is When moving out of mud, sand or fresh snow, pressing turned to the “ON”...
Page 232 Features and controls ASC operation display, ASC OFF display or ASC CAUTION indicator (if so equipped) When display blinks, ASC is operating, which N00559500125 Indicator (if so equipped) means that the road is slippery or that your vehicle’s wheels are beginning to slip. If this happens, drive slower.
Page 233 If the warning display does not go out or appears frequently, it is not necessary to stop the vehicle immediately, but you should have your vehi- cle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as Warning display type 2 possible.
Page 234: Power Steering System
“free play” in the CAUTION steering wheel. If this happens, take your vehicle to an autho- rized Mitsubishi Motors dealer or a repair facility of your For safety reasons, the cruise control system should choice.
Page 235: Cruise Control Indicator
Features and controls Your speed may increase to more than the set speed on a C- “ACC RES” switch steep downhill. You must use the brake to control your To increase the set speed and to resume to the previous set speed.
Page 236 Features and controls To activate NOTE If the cruise control is on when the ignition switch is N00518400284 1. Lightly press the “ON OFF” switch (A). turned to “OFF” position, cruise control will turn on auto- matically and the “CRUISE” control indicator will illumi- Type 1 nate the next time you start the engine.
Page 237 Features and controls To increase the set speed 3. Accelerate or decelerate to your desired speed, then press and release the “COAST SET” switch (B) when the N00518500302 There are 2 ways to increase the set speed. “CRUISE” indicator light is illuminated. The vehicle will then maintain the desired speed.
Page 238 Features and controls To decrease the set speed To increase the speed in small amounts, press the “ACC RES” switch (C) for less than 1 second and release it. Every time you N00518600231 There are 2 ways to reduce the set speed. press the “ACC RES”...
Page 239 Features and controls To temporarily increase or decrease the speed To decrease the speed in small amounts, press the “COAST SET” switch (B) for less than 1 second and release it. Every N00518700128 time you press the “COAST SET” switch (B), the speed will To temporarily increase the speed decrease by approximately 1 mph (1.6 km/h).
Page 240 Features and controls To deactivate To temporarily decrease the speed Apply the brakes to decrease the speed. To return to the previ- N00518800493 The cruise control can be turned off as follows: ously set speed, press the “ACC RES” switch (C). Refer to “To Press the “ON OFF”...
Page 241 Press the “ON OFF” switch to turn off the cruise control and have your vehicle inspected by an autho- rized Mitsubishi Motors dealer or a repair facility of your choice. 3-150...
Page 242 Features and controls To resume the set speed However, you must repeat the speed setting procedure under either of the following conditions: N00518900263 If the cruise control is deactivated by any of the conditions The ignition switch is turned to the “OFF” position. described in “To deactivate”...
Page 243 The spare wheel does not have a tire inflation pres- sure sensor. When the spare tire is used, the tire pressure moni- toring system will not work properly. See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. 3-152...
Page 244 However, if the warning light does not go off, or if it blinks again when the engine is restarted, have the vehicle inspected by an authorized Mitsubishi Type 2 Motors dealer. In such situations, a malfunctioning of the system may be preventing the monitoring of the tire pres- sure.
Page 245 Features and controls Under-inflation also reduces fuel efficiency and tire tread life, NOTE and may affect the vehicle’s handling and stopping ability. In addition, the warning display is displayed on the infor- Please note that the TPMS is not a substitute for proper tire mation screen in the multi-information display.
Page 246 Mitsubishi Motors dealer. If the tire repair is not done by Once adjustments have been made, the warning light will an authorized Mitsubishi Motors dealer, it is not covered go off after a few minutes of driving.
Page 247 Have tire and wheel replacement performed by The tire inflation pressure sensors’ battery is exhausted. an authorized Mitsubishi Motors dealer to avoid the risk of Wheels other than Mitsubishi genuine wheels are being damaging the tire inflation pressure sensors. If the wheel used.
Page 248 Features and controls General information N00533000122 Your tire pressure monitoring system operates on a radio fre- quency subject to Federal Communications Commission (FCC) Rules (For vehicles sold in U.S.A.) and Industry Canada Rules (For vehicles sold in Canada). This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules.
Page 249: Instrument Cluster
Features and controls Instrument cluster N00519000274 Type 1 Type 2 Speedometer → P.3-159 Multi-information display → P.3-162 Information screen display list → P.3-199 Tachometer → P.3-160 Rheostat meter illumination button → P.3-161 3-158...
Page 250 Features and controls Speedometer Type 2 N00519100161 The speedometer shows the vehicle speed in miles per hour (mph) or kilometers per hour (km/h). Type 1 3-159...
Page 251 Features and controls Tachometer CAUTION N00519200234 The tachometer shows engine revolutions per minute. This The red zone indicates an engine speed beyond the allows the driver to determine the most efficient shift position range of safe operation. (manual transaxle), selector position {continuously variable Select the correct shift position (manual transaxle), transmission (CVT)} or shift position (Twin Clutch SST) and selector position (CVT) or gearshift position (Twin...
Page 252 Features and controls Rheostat meter illumination button N00554900081 Each time you press this button, there is a sound and the bright- ness of the instruments changes. NOTE You can adjust to 8 different levels respectively for when the tail lights are illuminated and when they are not. If the vehicle is equipped with the automatic light control, when the light switch is in the “AUTO”...
Page 253: Multi-Information Display
Features and controls Multi-information display N00555000122 [Except for vehicles equipped with the Twin Clutch SST] The multi-information display displays warnings, the odometer/trip odometer, service reminder, engine coolant temperature, fuel remaining, outside temperature, selector lever position, average and momentary fuel consumption, driving range, average speed, instrument brightness, etc.
Page 254 Features and controls [For vehicles equipped with the Twin Clutch SST] The multi-information display displays warnings, the odometer/trip odometer, service reminder, engine coolant temperature, fuel remaining, outside temperature, Twin Clutch SST control mode, ACD control mode, gearshift lever position, average and momen- tary fuel consumption, driving range, average speed, instrument brightness, etc.
Page 255 Features and controls Multi-information meter switch NOTE The fuel units, temperature units, display language, and N00555100080 The multi-information meter switch is a button marked other settings can be changed. “INFO” on the left side of the dash. Refer to “Changing the function settings (With ignition Each time the multi-information meter switch is operated, a switch in the “ON”...
Page 256 Features and controls Information screen (With ignition switch in the Warning display screen (With ignition switch “OFF” position) in the “OFF” position) N00555300066 N00555200137 Each time you lightly press the multi-information meter If you press the multi-information meter switch and return switch, the display screen changes in the following order.
Page 257 Features and controls Type 1 1- Odometer/Trip odometer 2- Odometer/Trip odometer 3- Service reminder 4- Redisplay of a warning display screen When there is no Odometer/Trip odometer warning display N00555400054 Each time you lightly press the multi-information meter switch, the display screen changes as follows: →...
Page 258 Features and controls NOTE If there is no warning display, the switching sequence is: → Odometer/Trip odometer Odometer/Trip odometer → service reminder → Odometer/Trip odometer Both trip odometers can count up to 9999.9 Type 1 miles/kilometers. When a trip odometer goes past 9999.9 miles/kilometers, it returns to 0.0 miles/kilometers.
Page 259 Features and controls Interrupt display screen (With ignition switch in Returning to the display screen from before the warn- ing display the “OFF” position) Even if the cause of the warning display is not eliminated, you N00559600100 When there is information to be announced, such as a key can return to the screen that was displayed before the warning reminder, the buzzer sounds and switches to the warning dis- display.
Page 260 Features and controls Door ajar warning display (With ignition switch Vehicles with Twin Clutch SST in the “OFF” position) N00559700084 If any of the doors or the trunk lid is not completely closed, the open door or open trunk lid warning is displayed. Type 1 Type 2 warning...
Page 261 Features and controls Information screen (With ignition switch turned Vehicles with Twin Clutch SST from “OFF” to “ON” position) N00555800087 When the ignition switch is turned to the “ON” position, the display screen changes in the following order. Except for vehicles with Twin Clutch SST Type 1 Type 2 1- Screen when the ignition switch is “OFF”...
Page 262 Features and controls System check screen Service reminder When the ignition switch is turned to the “ON” position, the When the time for periodic inspection arrives, the warning dis- system check screen is displayed for about 4 seconds. If there play is displayed for a few seconds after the screen that is ini- is no fault, information screen (when the ignition switch is tially displayed when the ignition switch is turned “ON”.
Page 263 Features and controls ACD control mode display screen “Active Stability Control (ASC) OFF” display (if so equipped) screen (if so equipped) N00545900027 The operation status of the ACD control mode is displayed. N00556100029 Refer to “ACD control mode” on page 3-128. This is displayed when the Active Stability Control (ASC) is turned “OFF”...
Page 264 Features and controls 1- Odometer/Trip odometer Type 1 2- Odometer/Trip odometer 3- Service reminder 4- Engine coolant temperature display (Type 1) 5- Driving range display (Type 1) 6- Average speed display, average fuel consumption display, When there is no warning display momentary fuel consumption display (Type 1) 7- Driving range display, momentary fuel consumption display (Type 2)
Page 265 Features and controls Odometer/Trip odometer Driving range display The operation method is the same as when the ignition switch Shows the approximate driving range (how many more miles is in the “OFF” position. or kilometers you can drive) with the current fuel level. When For further details, refer to “Odometer/Trip odometer”...
Page 266 Features and controls Average speed display The initial (default) setting is “Auto reset mode”. The display setting can be changed to the preferred units This displays the average speed from the last reset to the (mph or km/h). present. Refer to “Changing the function settings (With ignition There are 2 types of mode settings as follows.
Page 267 Features and controls Auto reset mode Momentary fuel consumption display When the average fuel consumption is being displayed, if While driving, the momentary fuel consumption is shown with you hold down the multi-information meter switch, these a bar graph. calculations will be reset to zero. When the momentary fuel consumption surpasses the average When the ignition switch has been set to the “ACC”...
Page 268 Features and controls Interrupt display screen (With ignition switch in Except for vehicles with Twin Clutch SST the “ON” position) Type 1 N00556300089 Warning display When there is information to be announced, such as a system fault, a tone sounds and the information screen is switched to the warning display screen.
Page 269 Features and controls Redisplay of a warning display screen Vehicles with Twin Clutch SST When the warning is displayed, if you lightly press the multi-information meter switch a few times, the warning dis- play screen you switched from is redisplayed. Other interrupt displays The operation status of each system is displayed on the infor- mation screen.
Page 270 Features and controls Outside temperature display screen Fuel remaining display screen N00556500049 N00556600079 Shows the temperature outside the vehicle. Shows the amount of fuel remaining. NOTE Type 1 Type 2 The display setting can be changed to the preferred units (°F or °C).
Page 271 Features and controls Fuel tank filler door mark Vehicles with Twin Clutch SST The arrow (A) indicates that the fuel tank filler door is located on the left side of the vehicle. (Refer to “Filling the fuel tank” on page 1-4.) Fuel remaining warning display When the fuel level runs low, the information screen changes to the interrupt display of the fuel remaining warning display...
Page 272: Service Reminder
Maintenance Manual. For further information, please con- Type 1 tact your authorized Mitsubishi Motors dealer. Type 1 Type 2 Type 2 3. After your vehicle is inspected at an authorized Mitsubishi Motors dealer, it displays the time until the next periodic inspection. 3-181...
Page 273 Features and controls To reset 2. Press and hold the multi-information meter switch (for The “---” display can be reset while the ignition switch is in the about 2 seconds or more) to display “ ” and make it “OFF” position. When the display is reset, the time until the flash.
Page 274 If you accidentally reset the display, consult an authorized Type 2 Mitsubishi Motors dealer for assistance. CAUTION Always make sure that the warning display goes out before beginning to drive.
Page 275 Features and controls Changing the function settings (With ignition CAUTION switch in the “ON” position) For safety, stop the vehicle before operating. N00556800071 While driving, even if you operate the multi-infor- 1. Park your vehicle in a safe place. mation meter switch, the function setting screen is Fully apply the parking brake and move the shift lever not displayed.
Page 276 3-187. Refer to “Changing the temperature unit” on page 3-189. Refer to “Changing the display language” on page 3-190. Refer to “Changing the language on Mitsubishi Multi- ® Communication System or the Hands-free Bluetooth system to match the multi-information display (if so equipped)”...
Page 277 Features and controls Manual reset mode Type 1 • If you press and hold the multi-information meter switch when the average fuel consumption and average speed are displayed, these calculations will be reset to zero. • When the ignition switch is turned to the “ON” position from the “ACC”...
Page 278 Features and controls Changing the fuel consumption display unit 2. Lightly press the multi-information meter switch to select “AVG UNIT” (fuel consumption display unit setting). N00557100071 The fuel consumption display unit can be changed. The dis- tance, speed, and amount units are also changed to match the Type 1 selected fuel consumption unit.
Page 279 Features and controls NOTE 3. Press and hold the multi-information meter switch (for The display units for the driving range, the average fuel about 2 seconds or more) to display “AVG UNIT” (fuel consumption, the average speed and the momentary fuel consumption display unit setting).
Page 280 Features and controls Changing the temperature unit 3. Press and hold the multi-information meter switch (for about 2 seconds or more) to change in sequence from °F N00557200056 The temperature display unit can be changed. → °C → °F. 1. Press and hold the multi-information meter switch (for The setting is changed to the selected temperature unit.
Page 281 Features and controls Changing the display language 3. Press and hold the multi-information meter switch (for about 2 seconds or more) to display “LANGUAGE” (lan- N00557300057 The language of the multi-information display can be changed. guage setting). 1. Press and hold the multi-information meter switch (for 4.
Page 282 (if so equipped) Type 2 N00529800099 The language used in the Mitsubishi Multi-Communication ® System (if so equipped) or the Hands-free Bluetooth cellular phone interface system with voice recognition (if so equipped) can be changed automatically to the same language as that shown in the multi-information display.
Page 283 Refer to “Changing the function settings (With ignition selected with the language cooperative control, the lan- switch in the “ON” position)” on page 3-184. guage for the Mitsubishi Multi-Communication System 2. Lightly press the multi-information meter switch to select ®...
Page 284 Features and controls Changing the amount of time until “REST 3. Press and hold the multi-information meter switch (for REMINDER” is displayed about 2 seconds or more) to switch in sequence from ON (operation sound on) → OFF (operation sound off) → ON N00557500062 The amount of time until the display appears can be changed.
Page 285 Features and controls Changing the turn-signal sound (Type2) 3. Press and hold the multi-information meter switch (for about 2 seconds or more) to display “ALARM” (rest time N00563500012 It is possible to change the turn-signal sound. setting). 1. Press and hold the multi-information meter switch for Type 1 Type 2 about 2 seconds or more to switch from the setting mode...
Page 286 Features and controls Changing the momentary fuel consumption display 3. Press and hold the multi-information meter switch for (Type 2) about 2 seconds or more to switch in sequence from ON (with the green bar graph) → OFF (without the green bar N00563600013 It is possible to change the bar graph setting of the momentary graph) →...
Page 287 Features and controls Returning to the factory settings 3. Press and hold the multi-information meter switch (for about 5 seconds or more), the buzzer sounds and all of the N00557600089 All of the function settings can be returned to their factory set- function settings are returned to the factory settings.
Page 288 Features and controls Indicator light, warning light, and information screen display list N00557700035 Indicator and warning light list N00557800111 Type 1 Type A Type B 10- Supplemental Restraint System (SRS) warning light 1- Turn signal indicator/hazard warning light → P.3-211 →...
Page 289 Features and controls Type 2 Type A Type B 12- Engine malfunction indicator (“SERVICE ENGINE SOON” 1- Position indicator → P.3-211 or “Check engine light”) → P.3-212 2- High beam indicator → P.3-211 13- Active Stability Control (ASC) indicator → P.3-141 3- Charging system warning light →...
Page 290 (includ- ing after-market parts). If the warning display has occurred a number of times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and have the sys- tem checked.
Page 291 Features and controls Warning display list (With ignition switch in the “OFF” position) N00558000110 Screen type 1 Screen type 2 Cause Do this (Reference) You have forgotten to remove the Remove the key. key from the ignition switch. Refer to “Key reminder system” on page 3-54.
Page 292 Features and controls Screen type 1 Screen type 2 Cause Do this (Reference) After turning off the engine, an Turn the ignition switch to the attempt was made to open the “LOCK” (PUSH OFF) position. driver’s door with the ignition Refer to “Ignition switch on switch in any position other than reminder system”...
Page 293 Features and controls Screen type 1 Screen type 2 Cause Do this (Reference) There is a fault in the F.A.S.T.-key. Refer to “F.A.S.T.-key” on page 3- 3-202...
Page 294 Features and controls Warning display list (With ignition switch in the “ON” position) N00558100137 Screen type1 Screen type 2 Cause Do this (Reference) There is a fault in the F.A.S.T.-key. Refer to “F.A.S.T.-key” on page 3- 3-203...
Page 295 The brake fluid level is low. Park the vehicle in a safe place and There is a fault in the brake system. contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance. Refer to “Brake warning display”...
Page 296 “ON” to “Driver’s seat belt position. reminder/warning light and display” on page 2-18. There is a fault in the fuel system. Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked. 3-205...
Page 297 There is a fault in the engine oil cir- Park your vehicle in a safe place as culation system. soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked. Refer to “Oil pressure warning dis- play”...
Page 298 Screen type1 Screen type 2 Cause Do this (Reference) There is a fault in the Active Stabil- Contact an authorized Mitsubishi ity Control (ASC). Motors dealer or a repair facility of your choice to have the system checked. Refer to “Active Stability Control (ASC) ”...
Page 299 The ground may be frozen even when this warning is not displayed, so drive carefully. The timing chain may be worn. Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked. 3-208...
Page 300 (ASC) ” on page 3-138. Alerts the driver of the time for periodic inspection. Screen type 1 Screen type 2 Do this Have an inspection made by an authorized Mitsubishi Motors dealer. For further details, refer to “Service reminder” on page 3-181. 3-209...
Page 301 Features and controls The rest time can be set. Screen type 1 Screen type 2 Do this Park the vehicle in a safe place, turn off the engine, and take a rest. Use this display as rough guide for taking rests during a long drive. The interval from the start of your trip until this message is displayed can be set.
Page 302: Warning Lights
Features and controls Indicators Warning lights N00519900127 N00520300147 Turn signal indicators/Hazard warning lights Brake warning light N00520000216 N00520400438 The arrows will flash in time with the corresponding exterior When the ignition switch is turned to the “ON” position, this turn signals when the turn signal lever is used. indicator normally comes on and goes out a few seconds later.
Page 303 The vehicle should be brought to a halt in the follow- up while driving, have the system checked as soon as possible ing manner when brake performance is deterio- at an authorized Mitsubishi Motors dealer or a repair facility of rated. your choice.
Page 304: Charging System Warning Light
If the warning light stays on while the engine is run- SST has a stronger tendency to creep forward. ning, park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi NOTE Motors dealer or a repair facility of your choice to Do not disconnect the battery cable when the engine mal- have the system checked.
Page 305: Information Screen Display
Avoid sudden braking and high-speed driving. Park the vehicle in a safe place, and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. 3-214...
Page 306 If warnings are displayed while the engine is run- ning, park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
Page 307 Type 2 If this warning display comes on when the engine oil level is proper, have your vehicle checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice. NOTE If the engine oil pressure drops while the engine is running, the...
Page 308: Combination Headlights And Dimmer Switch
However, if water col- lects inside the light, have it checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. As your vehicle is equipped with daytime running lights, the combinations of switch operations and illuminated lights differ in accordance with the following conditions.
Page 309 Features and controls [When the engine is started, and the parking brake is released] Type 2 Rotate the switch to operate the lights. The daytime running lights will be illuminated: OFF The daytime running lights illuminated The daytime running lights illuminated Parking, tail, front and rear side-marker lights, license plate and instrument panel lights on Headlights and other lights on...
Page 310 The daytime running lights will be illuminated: adjusted. For further information, please contact your authorized The daytime running lights illuminated Mitsubishi Motors dealer or a repair facility of your choice. The daytime running lights illuminated AUTO Headlights and other lights turn on and off automati- Do not cover the sensor (A) for the automatic on/off con- cally in accordance with outside light level.
Page 311 Light auto-cutout function (headlights and other NOTE The light auto-cutout function can be deactivated. lights) See your authorized Mitsubishi Motors dealer for details. N00532600509 For vehicles equipped with the Mitsubishi Multi-Commu- If the ignition key is turned to “LOCK” or “ACC” posi- nication System, adjustments can be made using screen tion or removed from the ignition switch and the driver’s...
Page 312: Dimmer (High/Low Beam Change)
Features and controls Headlight reminder buzzer Dimmer (high/low beam change) N00549800196 N00549900155 To change the headlights from high beam to low beam and vice When using a key to start the engine versa, pull the turn signal lever to fully toward you (1). Switch If the driver’s door is opened with the key in the “LOCK”...
Page 313: Headlight Flasher
Features and controls Headlight flasher Welcome light (for vehicles equipped with the color multi-information display) N00550000198 You can flash the high beams by pulling the lever gently N00563200019 toward you (2). The lights will go back to normal when you let This function turns on the front side-marker and parking lights go.
Page 314 It is possible to modify functions as follows: • The headlights can be set to come on in the low beam setting instead of the front side-marker and parking lights. • The welcome light function can be deactivated. For details, consult a Mitsubishi Motors dealer. 3-223...
Page 315: Headlight Leveling Switch (If So Equipped)
• Turn the ignition switch to the “ON” position. It is possible to modify functions as follows: • The time that the headlights remain on can be changed. • The coming home light function can be deactivated. For details, consult a Mitsubishi Motors dealer. 3-224...
Page 316: Turn Signal Lever
Features and controls Turn signal lever NOTE Start adjusting when the knob is at the “0” position (when N00522600421 the beam is at its highest). When changing lanes, or to making a gradual turn, hold the Keep the knob in the “0” position except when using the lever in the “lane change”...
Page 317: Hazard Warning Flasher Switch
Have the vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice. The turn signal light 3-flash function for lane changes can be deactivated.
Page 318: Front Fog Light Switch
Features and controls Front fog light switch NOTE (if so equipped) If the headlights are switched to high beam, the front fog N00522800377 lights will go out; they will illuminate again when the The front fog lights illuminate only when the headlights are on headlights are switched back to low beam.
Page 319: Wiper And Washer Switch
Features and controls Wiper and washer switch N00523000510 CAUTION If the washer is used in cold weather, the washer fluid sprayed against the glass may freeze, which may hinder visibility. Warm the glass with the defroster before using the washer. Windshield wipers Except for vehicle with rain sensor The windshield wiper and washer can be operated with the...
Page 320 The speed-sensitive-operation function of the windshield wipers can be deactivated. For further information, please contact your authorized Mitsubishi Motors dealer or a repair facility of your choice. On vehicles equipped with Mitsubishi Multi- Communication System, screen operations can be used to make the adjustment.
Page 321 Features and controls Vehicle with rain sensor Rain sensor (if so equipped) The windshield wipers can be operated with the ignition switch Can only be used when the ignition switch is “ON” position. in the “ON” or “ACC” position. If the lever is put in the “AUTO” position, the rain sensor (B) If the blades are frozen to the windshield or rear window, do will detect the extent of rain (or snow, other moisture, dust, not operate the wipers until the ice has melted and the blades...
Page 322 • A physical shock is applied to the windshield. tioning. Have the vehicle checked at an authorized • A physical shock is applied to the rain sensor. Mitsubishi Motors dealer or a repair facility of your choice. If your hands get trapped, you could suffer injuries •...
Page 323 (C). tive, or at adjustable intervals). For further information, please contact your authorized Mitsubishi Motors dealer or a repair facility of your choice. On vehicles equipped with Mitsubishi Multi-Communica- tion System, screen operations can be used to make the adjustment.
Page 324 Features and controls Misting function Move the lever in the direction of the arrow and release, to operate the wipers once. Use this function when you are driving in mist or drizzle. The wipers will operate once if the lever is moved to the “AUTO”...
Page 325 Also, by releasing the lever soon after pulling it toward you, For details, consult a Mitsubishi Motors dealer. the washer fluid will be sprayed several times while the wipers are operating several times. (Intelligent washer) Intelligent washer will stop operating with any operation of the lever.
Page 326: Electric Rear Window Defogger Switch
This will add 20 more minutes. Replace the wiper blades when they are worn. Use the proper size replacement blades. If you have questions, ask your authorized Mitsubishi Motors dealer. 3-235...
Page 327 Features and controls Horn switch CAUTION N00523800156 The rear window defogger is not designed to melt To honk the horn, press around the “ ” mark on the steering snow. Remove any snow manually before using the wheel. rear window defogger. Use the rear window defogger only after the engine Type 1 has started and is running.
Page 328 Features and controls ® Hands-free Bluetooth cellular phone Type 2 interface system with voice recognition (if so equipped) N00506400072 ® The Hands-free Bluetooth cellular phone interface system with voice recognition uses a wireless communication technol- ® ogy known as Bluetooth to allow you to make hands-free ®...
Page 329 Features and controls Steering control switch WARNING N00506500044 ® Although the Hands-free Bluetooth cellular phone Type 1 interface system with voice recognition allows you to make hands-free calls, if you choose to use the cellu- lar phone while driving, you must not allow that usage to distract you in the safe operation of your vehicle.
Page 330 Features and controls SPEECH button Type 2 Press this button to change to voice recognition mode. While the system is in voice recognition mode, “Listen- ing” will appear on the audio display. If you press the button briefly while in voice recognition mode it, will interrupt prompting and allow voice com- mand input.
Page 331 Features and controls Voice recognition function NOTE When you press the SPEECH button to enter voice recog- N00506600104 ® The Hands-free Bluetooth cellular phone interface system nition mode with a cellular phone paired to the system, with voice recognition is equipped with a voice recognition current information on the cellular phone, such as function.
Page 332 Features and controls Speaker enrollment function Change the language using the “Language” command 1. Press the SPEECH button. N00528900077 ® The Hands-free Bluetooth cellular phone interface system 2. Say “Setup.” with voice recognition can use the speaker enrollment function 3. Say “Language.” to create a voice model for one person per language.
Page 333 Features and controls 1. Stop your vehicle in a safe area, put the shift lever (man- 5. The voice guide will prompt for phrase 1. Repeat the cor- ual transaxle) in the “N” position, or the selector lever responding phrase listed in table “Enrollment Commands” {continuously variable transmission (CVT)} or gearshift on page 3-266.
Page 334: Help Function
Features and controls Help function Enabling and disabling the voice model and retraining N00529100018 N00506700020 You can turn a voice model registered with the speaker enroll- ® The Hands-free Bluetooth cellular phone interface system ment function on and off whenever you want. with voice recognition is equipped with a Help function.
Page 335 Features and controls Confirmation function setting Security function N00507000020 N00507500025 It is possible to use a passcode as a security function by setting ® The Hands-free Bluetooth cellular phone interface system ® with voice recognition is equipped with a confirmation func- a passcode of your choice for the Hands-free Bluetooth cellu- tion.
Page 336 “Emergency calls” on page 3-251.) You can reenter the passcode as many times as you want. If you have forgotten your passcode, say “Cancel” to quit the voice input mode and then check with an authorized Mitsubishi Motors dealer. 3-245...
Page 337 Features and controls ® Pairing a cellular phone Use the following procedure to pair a Bluetooth compatible ® cellular phone to the Hands-free Bluetooth cellular phone N00507100135 ® To use the Hands-free Bluetooth cellular phone interface sys- interface system with voice recognition. ®...
Page 338 Features and controls ® 6. After the voice guide says “Please say a 4-digit pin num- 8. When the system finds a Bluetooth compatible cellular ber,” say a 4 digit number. The 4 digit number will be reg- phone, the voice guide will say “Please say the name of istered as a pin number for the phone.
Page 339 5. After the voice guide says “<phone tag> selected,” the If you are having difficulty pairing the phone, assistance system will reconnect to the cellular phone. Wait a can be obtained by calling Mitsubishi hands free con- moment for the process to complete. sumer support line 1-888-702-4100.
Page 340: Cellular Phones
Features and controls Having the system tell you a list of the registered Deleting a phone cellular phones N00507400040 ® Use the following procedure to delete a paired Bluetooth N00507300049 ® compatible cellular phone from the Hands-free Bluetooth cel- You can use the following procedure to hear a list of the cellu- lular phone interface system with voice recognition.
Page 341 Features and controls NOTE 7. When the phone deletion process is completed, the voice In the case of English, the system will recognize both guide will say “Deleted.” The system will then beep and “zero” and “oh (Letter “o”) for the number “0.” Refer to the voice recognition mode will be deactivated.
Page 342 Features and controls SEND function 5. After the voice guide says “Calling <voice tag> at <loca- ® tion>,” the Hands-free Bluetooth cellular phone inter- N00508000027 During a call, press the SPEECH button to enter the voice rec- face system with voice recognition will make the call. ognition mode and then say “{number string} SEND”...
Page 343 Features and controls Receiving calls Phonebook function N00508200045 N00508300017 ® If an incoming phone call is received while the ignition switch The Hands-free Bluetooth cellular phone interface system is in the “ACC” or “ON” position, the audio system will be with voice recognition has its own phonebook separate from automatically turned on and Incoming Call will be played, the phonebook on the cellular phone.
Page 344 Features and controls New entry 3. Say the telephone number to register it. N00508400034 NOTE You can register a new entry in the phonebook by saying “New In the case of English, the system will recognize both entry” on the Phonebook Main menu. You can register up to a “zero”...
Page 345 Features and controls Edit 3. After the voice guide says “Number Please,” say the tele- phone number to register it. N00508500022 You can edit information in the phonebook by saying “Edit” on If a telephone number has been registered for the selected the Phonebook Main menu.
Page 346 Features and controls Having the system tell you a list of the phonebook Deleting a registered number entries N00511700044 You can delete a telephone number in the phonebook by saying N00508600049 “Delete” on the Phonebook Main menu. You can hear a list of the names registered in the phonebook by saying “List names”...
Page 347 Features and controls General information 4. When the deletion of the telephone number is completed, the voice guide will say “<voice tag> <location> deleted” N00511900062 MODEL: MMC FCC ID: CB2MBLUEC07 IC: 279B- and then the system will return to the main menu. MBLUEC07 ®...
Page 348 Features and controls Voice Command Tree N00512000057 3-257...
Page 349 Features and controls Voice Command Tree - Phonebook N00512100032 3-258...
Page 350 Features and controls Voice Command Tree - Setup N00512800026 3-259...
Page 351 Features and controls Commands and Alternatives Alternative Command Language Primary Command N00513300044 Commands Alternative English Pairing Options Pairing Command Language Primary Command Commands Opciones De Empa- PHONE Spanish Emparejamiento rejamiento English Setup OPTIONS Options De Jume- SETUP Spanish Configuración French Jumelage lage French...
Page 352 Features and controls Alternative Alternative Command Language Primary Command Command Language Primary Command Commands Commands English Select Phone Select English Language LAN- Seleccionar Telé- Spanish Idioma SELECT Spanish Seleccionar GUAGE fono French Langue PHONE Sélectionner Un English New Entry French Sélectionner Téléphone Spanish...
Page 353 Features and controls Alternative Alternative Command Language Primary Command Command Language Primary Command Commands Commands English Try Again English Pager Spanish Intentarlo De Nuevo - Spanish Pager Al Pager AGAIN PAGER French Réessayer Sur Le Téléaver- French Téléavertisseur tisseur English Erase All ERASE English...
Page 354 Features and controls Alternative Alternative Command Language Primary Command Command Language Primary Command Commands Commands English Mute Off English Silencio Desacti- Spanish MUTE Spanish vado French Deux Désactiver La Sour- English Three French dine Three Spanish Tres English Send French Trois SEND Spanish...
Page 355 Features and controls Alternative Alternative Command Language Primary Command Command Language Primary Command Commands Commands English Nine Phonebook New English Entry Nine Spanish Nueve PHONE- Directorio French Neuf BOOK Agenda - Nueva Spanish Telefonico Nueva Entrada English Star (*) Entrada ENTRY Star Spanish...
Page 356 Features and controls Alternative Alternative Command Language Primary Command Command Language Primary Command Commands Commands Phonebook List Setup Pairing English English Setup Pairing Names Options PHONE- BOOK Agenda - Listar Configurar Opcio- Spanish SETUP Configurar Empa- LIST Nombres Spanish nes De Empareja- PHONE rejamiento NAMES...
Page 357 Features and controls Enrollment Commands Alternative Command Language Primary Command Commands N00539500044 Special Characters English Voice Training # = “Pound” # = “Número” # = “Diése” VOICE Spanish Aprendizaje De Voz - * = “Star” * = “Estrella” * = “Étoile” TRAI- Entraînement À...
Page 358 Features and controls Phrase # English Spanish French Phrase # English Spanish French Llamar Appeler 33 No 18 Call 293 - 5804 293 - 5804 293 -5804 Phonebook: Agenda - elimi- Répertoire: Sup- 19 Call * 350 Llamar * 350 Appeler * 350 Delete primer...
Page 359: Sun Visors
Features and controls Sun visors Phrase # English Spanish French N00524600308 Transferir lla- Transférer Fold the sun visor downward (1) to reduce front glare while 44 Transfer Call mada l’appel driving. To reduce side glare, turn the visor to the side (2). 45 Yes Sí...
Page 360: Vanity Mirror
Features and controls Vanity mirror Card holder The vanity mirrors are located on the back of the sun visors. Cards can be slipped into the front (A) of the lid of the vanity mirror. 3-269...
Page 361 Features and controls Ashtray To remove the ashtray, open the lid and lift up the tray while holding the lid. N00524800052 CAUTION Put out matches and cigarettes completely before leaving them in the ashtray. Don’t put paper or other flammable items into your ashtray.
Page 362 If it does not pop out by itself, pull it out and have it fixed at an authorized Mitsubishi Motors dealer or a repair facility of your choice. Leaving the cigarette lighter pushed in for a long time could cause a fire.
Page 363 Features and controls 12 V power outlet Type 1, Type 2 (if so equipped) The accessory can be operated when the ignition switch is in N00525000501 the “ON” or “ACC” position. CAUTION To use a “plug-in” type accessory, pull out the plug, then insert the plug in the socket.
Page 364 Features and controls Type 3 Type 2 The accessory can be operated when the ignition switch is in any position. To use a “plug-in” type accessory, open the cover, then insert the plug in the socket. 3-273...
Page 365: Interior Lights
Features and controls Interior lights Dome light (Front)/Reading lights (if so equipped) N00525800163 N00525300461 Dome light (Front) The dome light can be turned on by sliding the dome light switch. 1- Dome light (Rear) (if so equipped) → P.3-276 2- Dome light (Front)/Reading lights (if so equipped) →...
Page 366 “LOCK” position, the dome light will illuminate for about 30 seconds before going off. The time until the light goes off can be adjusted. See your authorized Mitsubishi Motors dealer for details. For vehicles equipped with the Mitsubishi Multi-Com- munication System, adjustments can be made using screen operations.
Page 367 “LOCK” position, the dome light will illuminate for about 30 seconds before going off. The time until the light goes off can be adjusted. See your authorized Mitsubishi Motors dealer for details. For vehicles equipped with the Mitsubishi Multi-Com- munication System, adjustments can be made using screen operations.
Page 368: Storage Spaces
A lid or the contents of a storage space The time until the lights automatically go off can be could otherwise cause injuries during a sudden stop. adjusted. See your authorized Mitsubishi Motors dealer for details. For vehicles equipped with the Mitsubishi Multi-Commu-...
Page 369 Features and controls [Except for RALLIART] [RALLIART] 1- Floor console box (if so equipped) → P. 3-281 1- Luggage floor boxes → P. 3-282 2- Glove compartment → P. 3-279 2- Floor console box → P. 3-281 3- Glove compartment → P. 3-279 3-278...
Page 370: Glove Compartment
Features and controls Glove compartment Card holder N00551500129 To open the glove compartment, pull the lever (A). There is a card holder on the inside of the glove compartment. NOTE WARNING Up to 2 cards will fit in the card holder. An open glove compartment door can cause a seri- ous injury or death to the front passenger in an acci- dent, even if the passenger is wearing his/her seat...
Page 371 Features and controls Front console boxes Lower box (if so equipped) N00546400029 To open, push the lid. Upper box CAUTION Do not use the front console boxes as an ashtray. This could cause a fire. NOTE The Auxiliary Audio connector (RCA) or the Auxiliary Video connector (RCA) is located in the upper box.
Page 372 Features and controls Floor console box with lid Tissue holder (if so equipped) The tissue holder (A) is located on the underside of the floor N00551600188 To open the floor console box, lift the release lever (A) and console box lid. raise the lid.
Page 373: Cup Holder
Features and controls Cup holder Luggage floor boxes (if so equipped) N00552400053 N00527300306 The boxes for storing articles are located inside the luggage For the front seat compartment. The cup holder is located the middle of the floor console. To use the boxes, remove the floor mat (A) and raise the lids The cup holder is designed for holding cups or drink-cans (B).
Page 374: Bottle Holder
Features and controls Bottle holder For the rear seat (if so equipped) N00537000104 N00502800049 This cup holder is located in the rear seat arm rest (A). CAUTION Pull the rear arm rest down to use the cup holder. Do not drink beverages while driving your vehicle. This is distracting and could cause an accident.
Page 375: Assist Grip
Features and controls Assist grip Coat hook (if so equipped) N00559000029 N00553600108 These grips are to support the body by hand while seated in the There is a coat hook on the rear seat assist grip of the driver’s vehicle. side.
Page 376: Driving Safety
Driving safety Fuel economy......4- Driving, alcohol and drugs....4- Vehicle preparation before driving.
Page 377: Fuel Economy
Driving safety Fuel economy Driving, alcohol and drugs N00628800107 N00628900052 Fuel economy is dependent on many factors. Your personal Drunk driving is one of the most frequent causes of accidents. driving habits can have a significant effect on your fuel use. Your driving ability can be seriously impaired even with blood Several recommendations for achieving the greatest fuel econ- alcohol levels far below the legal minimum.
Page 378: Vehicle Preparation Before Driving
Driving safety Vehicle preparation before driving Floor mats N00629000496 WARNING For a safer and more enjoyable trip, always observe the follow- ing: Keep floor mats clear of the pedals by correctly lay- Seat belts and seats ing floor mats that are suitable for the vehicle. To prevent the floor mats from slipping out of posi- Before starting the vehicle, make certain that you and all tion, securely retain them using the hook etc.
Page 379: Safe Driving Techniques
If you plan to drive in another country, obey their vehicle should, therefore, be performed only by an authorized registration laws and make sure you will be able to get the Mitsubishi Motors dealer. right fuel. Lights Have someone watch while you turn all the exterior lights on and off.
Page 380: Driving During Cold Weather
Always wear protective clothes and a face mask [For RALLIART vehicles sold in U.S.A.] when working with your battery, or let a skilled Mitsubishi Motors recommends that the standard equip- mechanic do it. ment tires be replaced with winter tires when the vehicle is going to be used in winter.
Page 381 All the parts of the brake system are critical to safety. Have the pressure sensors when the tire is replaced on the rim. Tire vehicle serviced by an authorized Mitsubishi Motors dealer or replacement should, therefore, be performed only by an a repair facility of your choice at regular intervals according to authorized Mitsubishi Motors dealer.
Page 382 Driving safety Parking Parking with the engine running Never leave the engine running while you take a short N00629600287 sleep/rest. Also, never leave the engine running in a closed or Parking on a hill poorly ventilated place. When parking on a hill, set the parking brake, and turn the front wheels toward the curb on a downhill, or away from the WARNING curb on an uphill.
Page 383: Loading Information
Driving safety Loading information Curb weight: the weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil, N00629900349 and coolant. It is very important to know how much weight your vehicle can Accessory weight: the combined weight (in excess of carry.
Page 384: Tire And Loading Information Placard
Driving safety Tire and loading information placard This placard shows the maximum number of occupants permit- ted to ride in your vehicle as well as “the combined weight of N00630100309 The tire and loading information placard is located on the occupants and cargo”...
Page 385 Driving safety Steps for Determining Correct Load Limit Type 2 N00630200182 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and pas- sengers that will be riding in your vehicle.
Page 386 Driving safety NOTE The following table shows examples on how to calculate total cargo/load capacity of your vehicle with varying seating config- urations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load capacity of your vehicle.
Page 387: Cargo Loads
Driving safety Cargo loads WARNING N00629700464 To reduce the risk of serious injury or death, the Cargo load precautions combined weights of the driver, passengers and To determine the cargo load capacity for your vehicle, subtract cargo and must never exceed the vehicle capacity the weight of all vehicle occupants from the vehicle capacity weight.
Page 388: Trailer Towing
Driving safety Trailer towing N00629800188 WARNING Do not use this vehicle for trailer towing. It may not be possible to maintain control or adequate braking. 4-13...
Page 390: Comfort Controls
Comfort controls Vents........5- Steering wheel audio remote control switch (if so equipped) .
Page 391 Comfort controls Vents Air flow and direction adjustments N00730200255 N00729900210 Center vents Move the knob to make adjustments. To close the vent, move the knob to the inside as far as possi- ble. Left Right 1- Center vents 2- Side vents A- Knob 1- Close 2- Open...
Page 392 Comfort controls Changing the mode selection Side vents Move the knob to make adjustments. N00736400493 To change the position and amount of air flowing from the To close the vent, move the knob to the outside as far as possi- vents, turn the mode selection dial.
Page 393 Comfort controls Foot/Face position Foot position Air flows to the upper part of the passenger compartment, and Air flows mainly to the leg area. flows to the leg area. *- if so equipped *- if so equipped NOTE With the mode selection dial between the “ ”...
Page 394 Comfort controls Foot/Defroster position Defroster position Air flows to the leg area, the windshield and the door windows. Air flows mainly to the windshield and the door windows. *- if so equipped NOTE With the mode selection dial between the “ ”...
Page 395: Control Panel
Comfort controls Heater without air conditioning function Blower speed selection dial N00737900020 (if so equipped) When the ignition switch is in the “ON” position, select the blower speed by turning the blower speed selection dial. N00737700031 The heater can only be used while the engine is running. Turning the dial clockwise will increase the blower speed;...
Page 396 Comfort controls Temperature control dial Mode selection dial N00738000044 N00738100058 Turn the temperature control dial clockwise to make the air To change the amount of air flowing from the vents, turn the warmer. Turn it counterclockwise to make the air cooler. mode selection dial.
Page 397 Comfort controls Air selection switch If the outside air is dusty or contaminated in some way, use the recirculation position. Switch to the outside air position every N00738200033 Normally, use the outside air position to keep the windshield now and then to keep the windows from fogging up. and side windows clear and to quickly remove fog or frost from the windshield.
Page 398 Comfort controls Operating the system NOTE For quick heating, set the blower speed selection dial to N00738300034 the position shown in the illustration. Heating Set the mode selection dial to the “ ” position and set the air selection switch (A) to the outside air position. Turn the temperature control dial clockwise or counterclock- wise to the desired temperature.
Page 399 Comfort controls Combination of unheated air and heated air Defrosting or defogging the windshield and door win- dows N00738400022 Set the mode selection dial to the positions shown in the illus- N00738500065 tration and set the air selection switch (A) to the outside air CAUTION position.
Page 400 Comfort controls For ordinary defrosting For quick defrosting Use this setting to keep the windshield and door windows clear of mist, and to keep the leg area heated (when driving in rain or snow). 1. Set the mode selection dial to the “ ”...
Page 401 Comfort controls Manual air conditioning with MAX A/C Blower speed selection dial mode N00736500146 (if so equipped) When the ignition switch is in the “ON” position, select the blower speed by turning the blower speed selection dial. N00730300256 The air conditioning can only be used while the engine is run- Turning the dial clockwise will increase the blower speed;...
Page 402 Comfort controls Temperature control dial Mode selection dial N00736600219 N00736700151 Turn the temperature control dial clockwise to make the air To change the amount of air flowing from the vents, turn the warmer. Turn it counterclockwise to make the air cooler. mode selection dial.
Page 403 Comfort controls Air selection switch NOTE When the air conditioning operates with the air selection N00736800367 Normally, use the outside air position to keep the windshield switch (A) in the outside air position, the system automat- and side windows clear and to quickly remove fog or frost ically determines whether to continue using outside air or from the windshield.
Page 404 Comfort controls Personalizing the air selection (Changing the function NOTE setting) While the mode selection dial is set between “ ” and “ ” position, the air conditioning compressor will run N00702100015 You can change the following functions to match your prefer- automatically.
Page 405 If the air conditioning indicator light (A) does not blink, there is no problem. If it does blink, have it checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
Page 406 Comfort controls Operating the air conditioning system NOTE For quick heating, set the blower speed selection dial to N00731100222 the position shown in the illustration. Heating Set the mode selection dial to the “ ” position and set the air selection switch (A) to the outside air position.
Page 407 Comfort controls Cooling NOTE If the outside air is dusty or contaminated in some way, N00731200278 push the air selection switch (A) to set it to the recircula- For ordinary cooling tion position. Let in some outside air from time to time for good ventilation.
Page 408 Comfort controls Combination of unheated air and heated air NOTE When the temperature control dial is set to the “MAX N00731300211 Set the mode selection dial to one of the positions shown in the A/C” position, the air conditioning compressor will run illustration and set the air selection switch (A) to the outside air automatically and the light will come on.
Page 409 Comfort controls Defrosting or defogging (windshield, door windows) For ordinary defrosting Use this setting to keep the windshield and door windows clear N00731400443 of mist, and to keep the leg area heated (when driving in rain or CAUTION snow). For safety, make sure you have a clear view through all the windows.
Page 410 Comfort controls For quick defrosting NOTE While the mode selection dial is set between “ ” and “ ” position, the air conditioning compressor will run automatically. The outside air position will also be auto- matically selected. (In this case, the air conditioning indi- cator will not change.) While the between “...
Page 411 Comfort controls Manual air conditioning without MAX A/C Blower speed selection dial mode N00736500133 (if so equipped) When the ignition switch is in the “ON” position, select the blower speed by turning the blower speed selection dial. N00730300269 The air conditioning can only be used while the engine is run- Turning the dial clockwise will increase the blower speed;...
Page 412 Comfort controls Temperature control dial Mode selection dial N00736600176 N00736700177 Turn the temperature control dial clockwise to make the air To change the amount of air flowing from the vents, turn the warmer. Turn it counterclockwise to make the air cooler. mode selection dial.
Page 413 Comfort controls Air selection switch NOTE When the air conditioning operates with the air selection N00736800279 Normally, use the outside air position to keep the windshield switch (A) in the outside air position, the system automat- and side windows clear and to quickly remove fog or frost ically determines whether to continue using outside air or from the windshield.
Page 414 Comfort controls Personalizing the air selection (Changing the function Air conditioning switch setting) N00731000436 Push the switch, and the air conditioning compressor will turn N00702100028 on. The air conditioning indicator light (A) will come on. You can change the following functions to match your prefer- A sound will be made every time you push the switch.
Page 415 (A) does not blink, there is no problem. If it does Turn the temperature control dial clockwise or counterclock- blink, have it checked at an authorized Mitsubishi Motors wise to the desired temperature. Select the best speed to fit dealer or a repair facility of your choice.
Page 416 Comfort controls Cooling NOTE For quick heating, set the blower speed selection dial to N00731200249 the position shown in the illustration. For ordinary cooling 1. Set the mode selection dial to the “ ” position. 2. Push the air selection switch (A) to set it to the outside air position.
Page 417 Comfort controls Combination of unheated air and heated air NOTE If the outside air is dusty or contaminated in some way, N00731300224 Set the mode selection dial to the positions shown in the illus- push the air selection switch (A) to set it to the recircula- tration and set the air selection switch (A) to the outside air tion position.
Page 418 Comfort controls Defrosting or defogging (windshield, door windows) For ordinary defrosting Use this setting to keep the windshield and door windows clear N00731400456 of mist, and to keep the leg area heated (when driving in rain or CAUTION snow). For safety, make sure you have a clear view through all the windows.
Page 419 Comfort controls For quick defrosting NOTE While the mode selection dial is set to the “ ” position, the air conditioning compressor will run automatically. The outside air position will also be automatically selected. To defog quickly, direct the air flow from the side vents toward the door windows.
Page 420 Comfort controls Automatic air conditioning with Fahrenheit NOTE There is an interior air temperature sensor (A) in the illus- scale (if so equipped) trated position. N00731500226 Never place anything over the sensor, since doing so will The air conditioning can only be used while the engine is run- prevent it from functioning properly.
Page 421 Comfort controls Blower speed selection dial Temperature control dial N00736900094 N00737000265 When the ignition switch is in the “ON” position, select the Use this dial to adjust the temperature in the passenger com- blower speed by turning the blower speed selection dial. partment.
Page 422 The above indicates the factory settings. You can personalize the air selection switch and air conditioning switch to match your personal preferences. Contact your Mitsubishi Motors dealer or a repair facility of your choice for assistance. Refer to “Personalizing the air conditioning switch (Changing the function setting)”...
Page 423 Comfort controls Air selection switch When the air conditioning turns on, the air selection is con- trolled automatically. When the air conditioning turns off, the N00737200238 Normally, use the outside air position to keep the windshield air selection automatically goes back to the outside air position. and side windows clear and to quickly remove fog or frost If high cooling performance is desired, or if the outside air is from the windshield.
Page 424 Comfort controls Personalizing the air selection (Changing the function NOTE setting) The factory setting is “Enable automatic air control”. While the mode selection dial is set between “ ” and N00760000018 You can change the following functions to match your prefer- “...
Page 425 If the air conditioning indicator light does not blink there is no problem. If it does blink, have it checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice. Sometimes, for example after using a high-pressure car wash, the condenser can get wet, and the air conditioning indicator light (A) blinks temporarily.
Page 426 Comfort controls Personalizing the air conditioning switch (Changing NOTE the function setting) The factory setting is “Enable automatic air conditioning control”. N00759800032 You can change the following functions to match your prefer- While the mode selection dial is set between “ ”...
Page 427 Comfort controls Operating the air conditioning system (automatic NOTE Set the temperature at about 75 under normal conditions. mode) While the engine coolant temperature is low, the tempera- N00731700299 ture of the air from the heater will be cool/cold until the engine warms up, even if you have selected warm air with the dial.
Page 428 Comfort controls Operating the air conditioning system (manual For ordinary defrosting Use this setting to keep the windshield and door windows clear mode) of mist, and to keep the leg area heated (when driving in rain or N00731800072 snow). Blower speed and vent mode may be controlled manually by setting the blower speed selection dial and the mode selection dial to the desired positions.
Page 429 Comfort controls For quick defrosting NOTE While the mode selection dial is set between “ ” and “ ” position, the air conditioning compressor will run automatically. The outside air position will also be selected automatically. If the mode selection dial is set between “ ”...
Page 430 Comfort controls Automatic air conditioning with Celsius NOTE There is an interior air temperature sensor (A) in the illus- scale (if so equipped) trated position. N00731500239 Never place anything over the sensor, since doing so will The air conditioning can only be used while the engine is run- prevent it from functioning properly.
Page 431 Comfort controls Blower speed selection dial Temperature control dial N00736900111 N00737000281 When the ignition switch is in the “ON” position, select the Use this dial to adjust the temperature in the passenger com- blower speed by turning the blower speed selection dial. partment.
Page 432 The above indicates the factory settings. You can personalize the air selection switch and air conditioning switch to match your personal preferences. Contact your Mitsubishi Motors dealer or a repair facility of your choice for assistance. Refer to “Personalizing the air conditioning switch (Changing the function setting)”...
Page 433 Comfort controls Air selection switch When the air conditioning turns on, the air selection is con- trolled automatically. When the air conditioning turns off, the N00737200241 Normally, use the outside air position to keep the windshield air selection automatically goes back to the outside air position. and side windows clear and to quickly remove fog or frost If high cooling performance is desired, or if the outside air is from the windshield.
Page 434 Comfort controls Personalizing the air selection (Changing the function NOTE setting) The factory setting is “Enable automatic air control”. While the mode selection dial is set to the “ ” position, N00760000050 You can change the following functions to match your prefer- the air selection will automatically change to the outside ence.
Page 435 If the air conditioning indicator light does not blink there is no problem. If it does blink, have it checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice. Sometimes, for example after using a high-pressure car wash, the condenser can get wet, and the air conditioning indicator light (A) blinks temporarily.
Page 436 Comfort controls Personalizing the air conditioning switch (Changing NOTE the function setting) The factory setting is “Enable automatic air conditioning control”. N00759800029 You can change the following functions to match your prefer- While the mode selection dial is set to the “ ”...
Page 437 Comfort controls Operating the air conditioning system (automatic NOTE Set the temperature at about 25 under normal conditions. mode) While the engine coolant temperature is low, the tempera- N00731700286 ture of the air from the heater will be cool/cold until the engine warms up, even if you have selected warm air with the dial.
Page 438 Comfort controls Operating the air conditioning system (manual For ordinary defrosting Use this setting to keep the windshield and door windows clear mode) of mist, and to keep the leg area heated (when driving in rain or N00731800098 snow). Blower speed and vent mode may be controlled manually by setting the blower speed selection dial and the mode selection dial to the desired positions.
Page 439 Comfort controls For quick defrosting NOTE While the mode selection dial is set to the “ ” position, the air conditioning compressor will run automatically. The outside air position will also be selected automati- cally. To defog quickly, direct the air flow from the side vents toward the door windows.
Page 440: Important Air Conditioning Operating Tips
This includes the quick might be a refrigerant leak. defrosting mode. Operating the air condition system weekly Have the system inspected by your authorized Mitsubishi maintains lubrication of the compressor internal parts to keep Motors dealer or a repair facility of your choice.
Page 441: Air Purifier
Mitsubishi Motors dealer or a repair facility of your choice. Never try to repair it yourself. Avoid using the audio system until it is inspected by a qualified person.
Page 442 Comfort controls ™ SIRIUS Satellite Radio (if so equipped) N00760100080 Satellite radio uses direct satellite to receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is SIRIUS Satellite Radio. This service offers over 100 channels of music, sports, news, enter- tainment, and programming for listeners, directly from its sat- ellites and broadcasting studios.
Page 443 Comfort controls Volume and tone control panel N00711900598 1- PWR (On-Off) switch 2- VOL (Volume control) knob 3- Display 4- SOUND (Sound control) switch 5-54...
Page 444 Comfort controls To adjust the volume To adjust the tone N00712000365 N00712100597 Turn the VOL knob (2) clockwise to increase the volume; 1. Press the SOUND switch (4) repeatedly to select the tone counterclockwise to decrease the volume. or balance control to change. The order is: TYPE → The status will be displayed in the display (3).
Page 445 Comfort controls 2. Turn the SOUND switch (4) either clockwise or counter- Sound control switch operation clockwise to change the tone/balance setting. Adjust Adjust level The status will be displayed in the display (3). Counterclock- mode Clockwise turn wise turn NORMAL ↔...
Page 446 Comfort controls TYPE (Acoustic characteristic selection) FIELD (Sound field selection) To select the desired acoustic characteristic. To select the desired sound field. Acoustic characteristic Description Sound field type Description Sounds good for all types of Allows the listeners to enjoy an NORMAL music.
Page 447 Comfort controls Speed Compensated Volume function BASS (Bass tone control) To select the desired bass level. N00752200154 Speed Compensated Volume function is a feature that automat- MID (Midrange tone control) ically adjusts the VOLUME, BASS, MIDDLE, and TREBLE To select the desired midrange level. settings in accordance with the vehicle speed.
Page 448 Comfort controls Radio control panel and display N00734900700 1- RADIO (AM/FM selection) button 2- PWR (On-Off) switch 3- PAGE button 4- DISP (Display) button 5- SEEK (Down-seek) button 6- SEEK (Up-seek) button 7- TUNE switch 8- PTY (Program Type) button 9- SCAN button 10- Memory select buttons 11- FM (FM1/FM2) display...
Page 449 Comfort controls To listen to the radio To store a frequency in the memory, follow these steps: 1. Press the SEEK button (5 or 6), or turn the TUNE switch N00735000766 1. Press the PWR switch (2) to turn the audio system ON and (7) to tune to the frequency you wish to keep in the mem- OFF.
Page 450 Comfort controls Radio broadcast data system (RBDS) To search for a broadcast of desired PTY 1. To enter PTY (Program Type) mode, press the PTY button N00751800052 RBDS features are available for use only on FM stations that (8) during FM reception. broadcast RBDS information.
Page 451 Comfort controls NOTE If you wish to listen to another station of the same PTY as currently selected, repeat the previous procedure from step 2. To display the station name and the PTY, press the DISP button (4) and the PTY button (8) respectively. If no station is found with your desired PTY, “EMPTY”...
Page 452 Comfort controls Text message The radio can receive text messages broadcast by some RBDS stations. 1. While tuning in to an RBDS station, press the DISP but- ton (4). 2. A text message will appear on the display. If a station name appears, press the DISP button again, then the text message will be displayed.
Page 453 Comfort controls SIRIUS satellite radio control panel and display N00700200171 1- RADIO (AM/FM/Satellite radio selection) button 2- PWR (On-Off) switch 3- PAGE button 4- DISP (Display) button 5- Channel selection down button 6- Channel selection up button 7- TUNE/SOUND (Category selection) switch 8- PTY button 9- SCAN button 10- Memory select buttons...
Page 454 Comfort controls To listen to the SIRIUS satellite radio Pressing the PTY button (8) while in the category selec- tion mode will cause the current channel to be displayed N00760500143 for around 2 seconds. 1. Press the PWR switch (2) to turn the audio system ON and OFF.
Page 455 Comfort controls To enter channels into the memory SIRIUS ID indication You can save one channel to each Memory select button (10), If you press a channel selection button (5 or 6) to select “CH for a maximum of 24 channels in memory. 0,”...
Page 456 If the channel that is currently being received is not enabled. locked, you can select “LOCK CH”; if it is locked, you If the vehicle is equipped with a Mitsubishi Motors autho- can select “UNLOCK CH.” rized hands-free phone system, “PHONE OFF” will not be displayed.
Page 457 Comfort controls To skip a desired channel To cancel skip settings You can set any channel to be skipped during channel selec- You can cancel skip settings on channels. tion. 1. Press the TUNE/SOUND switch (7) for about 2 seconds 1.
Page 458 Comfort controls To unlock locked channels 5. Use the Memory select buttons (10) to enter the code There are two ways to unlock a locked channel. One way is to (1111 to 6666) and then press the TUNE/SOUND switch unlock a single locked channel of your choice. The other way (7).
Page 459 Comfort controls To change the lock cancellation code NOTE The default factory setting for the code is “1111.” You can change the code for unlocking channel(s) to any num- You can change the code to any number you want with the ber you want.
Page 460 Comfort controls Text message 7. “STORED” will be displayed for 2 seconds, the code will be changed and the satellite radio will return to the LOCK You can change what is shown on the display when the satellite setting mode. radio tunes into a channel.
Page 461 Comfort controls CD control panel and display N00735300600 1- RADIO (AM/FM selection) button 2- CD (CD mode changeover) button 3- PWR (On-Off) switch 4- PAGE button 5- DISP (Display) button 6- RPT (Repeat) button 7- RDM (Random) button 8- Fast-reverse button 9- Fast-forward button 10- SCAN button 11- Eject button...
Page 462 Comfort controls To listen to a CD To listen to a music CD N00735500918 To set discs 1. Press the PWR switch (3) to turn the audio system ON and OFF. The system turns on in the last mode used. 2.
Page 463 Comfort controls To listen to an MP3 CD NOTE While listening to a disc on which CD-DA (CD-Digital This CD player allows you to play MP3 (MPEG Audio Layer- Audio) and MP3 files have both been recorded, you can 3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and switch between reading of the CD-DA, reading of the CD-RWs (rewritable CDs) in ISO9660 Level 1/ Level 2, Joliet, MP3 files, and the external audio input mode by pressing...
Page 464 Comfort controls Folder selection order/MP3 file playback order (Example) To fast forward/reverse the disc To fast forward or fast reverse the disc, press the fast-forward button (9) or the fast-reverse button (8). Root folder (Root directory) Fast forward You can fast forward the disc by pressing the fast-forward but- ton (9).
Page 465 Comfort controls To select a desired folder (MP3 CDs only) To select a desired track You can select your desired folder by turning the FOLDER You can select your desired track by using the TRACK button switch (13). (14). Track up Press the side of the TRACK button (14) repeatedly until the desired track number appears on the display.
Page 466 Comfort controls To change the order of tracks for playback Random playback for a disc (music CDs only) Press the RDM button (7) briefly. “RDM” will appear on the display. Tracks on the currently selected disc will be played in a random sequence.
Page 467 Comfort controls Random playback for all folders on a disc (MP3 CDs only) To find the start of each track on a disc for playback Press the RDM button (7) for 2 seconds or longer (until you Press the SCAN button (10). “SCAN” will appear on the dis- hear a beep).
Page 468 Comfort controls CD text and MP3 title display MP3 title The CD player can display folder and track titles for discs N00752100137 This CD player can display CD text and MP3 titles including encoded with folder and track information. Press the DISP but- ID3 tag information.
Page 469 “•”. turn off the audio system and have it checked at an autho- rized Mitsubishi Motors dealer or a repair facility of your choice. Never try to repair it yourself. Avoid using the audio system until it is inspected by a qualified person.
Page 470 Comfort controls The audio amplifier (if so equipped) is located under the ™ SIRIUS Satellite Radio (if so equipped) front left seat. N00760100107 Do not subject the amplifier to a strong impact. Satellite radio uses direct satellite to receiver broadcasting It could damage the amplifier or malfunctioning could technology to provide clear digital sound, coast to coast.
Page 471 Comfort controls Volume and tone control panel N00711900602 1- PWR (On-Off) switch 2- VOL (Volume control) knob 3- Display 4- SOUND (Sound control) switch 5-82...
Page 472 Comfort controls To adjust the volume To adjust the tone N00712000378 N00712100555 Turn the VOL knob (2) clockwise to increase the volume; 1. Press the SOUND switch (4) repeatedly to select the tone counterclockwise to decrease the volume. or balance control to change. The order is: SUB PUNCH The status will be displayed in the display (3).
Page 473 Comfort controls 2. Turn the SOUND switch (4) either clockwise or counter- Sound control switch operation clockwise to change the tone/balance setting. Adjust Adjust The status will be displayed in the display (3). Counterclock- Mode Level Clockwise turn wise turn 1 to 6 Weaker Stronger...
Page 474 Comfort controls SUB PUNCH (subwoofer volume control) FIELD (Sound field selection) To select the desired deep bass level. To select the desired sound field. TYPE (acoustic characteristic selection) Sound field type Description To select the desired acoustic characteristic. Optimized for the Rockford Fosgate NORMAL high bass output.
Page 475 Comfort controls BALANCE (Left/Right balance control) 2. Push the SOUND switch for at least about 2 seconds. The To balance the volume from the L (left) and the R (right) system will switch to MENU mode and the characters speakers. “SCV ON”...
Page 476 Comfort controls Radio control panel and display N00734900713 1- RADIO (AM/FM selection) button 2- PWR (On-Off) switch 3- PAGE button 4- DISP (Display) button 5- SEEK (Down-seek) button 6- SEEK (Up-seek) button 7- TUNE switch 8- PTY (Program Type) button 9- SCAN button 10- Memory select buttons 11- FM (FM1/FM2) display...
Page 477 Comfort controls To listen to the radio To store a frequency in the memory, follow these steps: 1. Press the SEEK button (5 or 6), or turn the TUNE switch N00735000779 1. Press the PWR switch (2) to turn the audio system ON and (7) to tune to the frequency you wish to keep in the mem- OFF.
Page 478 Comfort controls Radio broadcast data system (RBDS) To search for a broadcast of desired PTY 1. To enter PTY (Program Type) mode, press the PTY button N00751800065 RBDS features are available for use only on FM stations that (8) during FM reception. broadcast RBDS information.
Page 479 Comfort controls NOTE If you wish to listen to another station of the same PTY as currently selected, repeat the previous procedure from step 2. To display the station name and the PTY, press the DISP button (4) and the PTY button (8) respectively. If no station is found with your desired PTY, “EMPTY”...
Page 480 Comfort controls Text message The radio can receive text messages broadcast by some RBDS stations. 1. While tuning in to an RBDS station, press the DISP but- ton (4). 2. A text message will appear on the display. If a station name appears, press the DISP button again, then the text message will be displayed.
Page 481 Comfort controls SIRIUS satellite radio control panel and display N00700200184 1- RADIO (AM/FM/Satellite radio selection) button 2- PWR (On-Off) switch 3- PAGE button 4- DISP (Display) button 5- Channel selection down button 6- Channel selection up button 7- TUNE/SOUND (Category selection) switch 8- PTY button 9- SCAN button 10- Memory select buttons...
Page 482 Comfort controls To listen to the SIRIUS satellite radio Pressing the PTY button (8) while in the category selec- tion mode will cause the current channel to be displayed N00760500156 for around 2 seconds. 1. Press the PWR switch (2) to turn the audio system ON and OFF.
Page 483 Comfort controls To enter channels into the memory SIRIUS ID indication You can save one channel to each Memory select button (10), If you press a channel selection button (5 or 6) to select “CH for a maximum of 24 channels in memory. 0,”...
Page 484 If the channel that is currently being received is not enabled. locked, you can select “LOCK CH”; if it is locked, you If the vehicle is equipped with a Mitsubishi Motors autho- can select “UNLOCK CH.” rized hands-free phone system, “PHONE OFF” will not be displayed.
Page 485 Comfort controls To skip a desired channel To cancel skip settings You can set any channel to be skipped during channel selec- You can cancel skip settings on channels. tion. 1. Press the TUNE/SOUND switch (7) for about 2 seconds 1.
Page 486 Comfort controls To unlock locked channels 5. Use the Memory select buttons (10) to enter the code There are two ways to unlock a locked channel. One way is to (1111 to 6666) and then press the TUNE/SOUND switch unlock a single locked channel of your choice. The other way (7).
Page 487 Comfort controls To change the lock cancellation code NOTE The default factory setting for the code is “1111.” You can change the code for unlocking channel(s) to any num- You can change the code to any number you want with the ber you want.
Page 488 Comfort controls Text message 7. “STORED” will be displayed for 2 seconds, the code will be changed and the satellite radio will return to the LOCK You can change what is shown on the display when the satellite setting mode. radio tunes into a channel.
Page 489 Comfort controls CD control panel and display N00735300613 16- Disc loading slot 1- RADIO (AM/FM selection) button 17- FOLDER switch 2- CD (CD mode changeover) button 18- TRACK (Track up/down) button 3- PWR (On-Off) switch 19- Display 4- LOAD indicator 5- LOAD button 6- PAGE button 7- DISP (Display) button...
Page 490 Comfort controls To listen to a CD To set discs N00735500921 The compact disc (CD) can be loaded or ejected by pressing the LOAD button (5) or the eject button (15) even if the audio system power is OFF. 1. Press the PWR switch (3) to turn the audio system ON and OFF.
Page 491 Comfort controls To set all the discs To eject discs 1. Press the LOAD button (5) for 2 seconds or longer (until you hear a beep). 2. The autochanger will select the lowest-numbered empty slot and switch to loading standby mode. 3.
Page 492 Comfort controls To eject all the discs To listen to a music CD 1. Press the eject button (15) for 2 seconds or longer (until you hear a beep). 2. The currently selected disc will be ejected. When you remove the ejected disc, the next disc will automatically be ejected.
Page 493 Comfort controls To listen to an MP3 CD NOTE This autochanger allows you to play MP3 (MPEG Audio While listening to a disc on which CD-DA (CD-Digital Layer-3) files recorded on CD-ROMs, CD-Rs (recordable Audio) and MP3 files have both been recorded, you can CDs), and CD-RWs (rewritable CDs) in ISO9660 Level switch between reading of the CD-DA, reading of the MP3 1/Level 2, Joliet, and Romeo formats.
Page 494 Comfort controls Folder selection order/MP3 file playback order (Example) To fast forward/reverse the disc To fast forward or fast reverse the disc, press the fast-forward button (11) or the fast-reverse button (10). Root folder (Root directory) Fast forward You can fast-forward the disc by pressing the fast-forward but- ton (11).
Page 495 Comfort controls To select a desired folder (MP3 CDs only) To select a desired track You can select your desired folder by turning the FOLDER You can select your desired track by using the TRACK button switch (17). (18). Track up Press the side of the TRACK button (18) repeatedly until the desired track number appears on the display.
Page 496 Comfort controls To repeat songs in the same folder (MP3 CDs only) To change the order of tracks for playback While a song is playing, press the RPT button (8) for 2 seconds Random playback for a disc (music CDs only) or longer (until you hear a beep).
Page 497 Comfort controls Random playback for all folders on a disc (MP3 CDs only) To find the start of each track on a disc for playback Press the RDM button (9) for 2 seconds or longer (until you Press the SCAN button (14). “SCAN” will appear on the dis- hear a beep).
Page 498 Comfort controls MP3 title The autochanger can display folder and track titles for discs with converted folder and track information. Press the DISP button (7) repeatedly to make selections in the following sequence: folder name → track name → normal display mode. NOTE The display can show up to 12 characters.
Page 499 Comfort controls To use the external audio input function ID3 tag information The autochanger can display ID3 tag information for files that (if so equipped) have been recorded with ID3 tag information. N00702200117 1. Press the DISP button (7) for 2 seconds or longer to switch to the ID3 tag information.
Page 500 Do not operate the connected audio equipment while NOTE driving. For information on using the video input connector (C), This could distract you and an accident might occur. refer to the separate owner’s manual for a Mitsubishi Multi-Communication System. 5-111...
Page 501: Steering Wheel Audio Remote Control Switch
Comfort controls Steering wheel audio remote control switch NOTE The connected audio equipment cannot be operated with (if so equipped) the vehicle’s audio system. N00714800396 Depending on the connected audio equipment, it may pro- The remote control switch is located on the left side of the duce noise from the speakers.
Page 502: Volume Control
Comfort controls Volume control Type 2 Volume up button - 1 While the button is pressed, the volume will continue to increase. Volume down button - 2 While the button is pressed, the volume will continue to decrease. Mode selection Press the mode selector button (3) to select the desired mode.
Page 503 Comfort controls To listen to a CD Press the mode selector button (3) and select CD mode. To fast forward/reverse the disc To fast forward or fast reverse the disc, press the fast-forward button (4) or the fast-reverse button (5). Fast forward You can fast forward the disc by holding down the fast-forward button (4).
Page 504: Error Codes
Eject disc and reload. If disc will not eject, Loading or eject error. Pick-up is out of posi- bring your vehicle to your authorized ERROR 03 Mechanism error tion. Mitsubishi Motors dealer or a repair facility of your choice for repair. 5-115...
Page 505 Communication error between external device Bring your vehicle to your authorized Communication or ERROR and audio equipment. Mitsubishi Motors dealer or a repair facility of power supply error Power supply error of external device. your choice for repair. 5-116...
Page 506 Take the vehicle to your authorized The antenna may be faulty, not securely ANTENNA ↔ ERROR Antenna error Mitsubishi Motors dealer or a repair connected, or open-circuited. facility of your choice. Move to a place where the signal is ACQUIRING Cannot pick up signal.
Page 507 Take the vehicle to your authorized Mechanical fault or bad There is a mechanical fault or a bad con- SAT ERROR Mitsubishi Motors dealer or a repair connection nection. facility of your choice. This channel is not broadcasting at the...
Page 508 Comfort controls Handling of compact discs (CD) N00734100311 Use only compact discs that have the following mark. (Playback of CD-R or CD-RW discs may cause prob- lems.) The use of special shaped compact discs, damaged com- pact discs (like cracked discs) or low-quality compact discs (like warped discs or burrs on the discs) such as those shown will damage the CD player.
Page 509 Comfort controls In the following circumstances, moisture can form on To clean a disc, use a soft, clean, dry cloth. Wipe directly discs and inside the audio system, preventing normal from the center hole toward the outer edge. Do not wipe in operation.
Page 510 Do not remove the cover and attempt to repair the CD player by yourself. There are no user serviceable parts inside. In case of malfunction, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. 5-121...
Page 511: Satellite Radio
Comfort controls Antenna To remove Turn the pole (A) counterclockwise. N00734200396 Roof antenna (except for vehicles with SIRIUS To install satellite radio) Screw the pole (A) clockwise into the base (B) until it is securely retained. When listening to the radio, fold the antenna toward the rear of the vehicle until you hear it click.
Page 512 Comfort controls Roof antenna (for vehicles with SIRIUS satellite To remove radio) Turn the pole (A) counterclockwise. For securing the best satellite reception, the angle of the To install antenna is fixed. Screw the pole (A) clockwise into the base (B) until it is securely retained.
Page 513 Comfort controls Digital clock — Time signal setting At the same time the button is pressed, the fol- N00755000065 lowing modifications are made. The time is displayed when the ignition switch is in the “ON” 10:00 - 10:29 ..Change to 10:00 or “ACC”...
Page 514: General Information About Your Radio
Comfort controls General information about your radio Signal transmission FM signals do not follow the earth surface nor are they N00733900325 Your vehicle’s radio receives both AM and FM stations. reflected by the upper atmosphere. For this reason, FM broad- The quality of your reception is affected by distance, obstacles, casts cannot be received over long distances.
Page 515 Comfort controls Reflection Cross modulation The reason why one can hear FM but not AM in parking If one listens to a weak station and is in the vicinity of another garages, under bridges etc., is that FM signals, unlike AM sig- strong station, both stations might be received simultaneously.
Page 516 Comfort controls Causes of disturbances FM reception is affected by the electrical systems of vehicles in the vicinity, especially those without an electronic noise sup- pression device. The disturbance is even greater if the station is weak or poorly tuned. FM reception is not as sensitive to electrical disturbances as AM.
Page 518: For Emergencies
For emergencies If the vehicle breaks down ....6- Jump-starting the engine ....6- Engine overheating .
Page 519: If The Vehicle Breaks Down
For emergencies If the vehicle breaks down Jump-starting the engine N00836300145 N00836400641 If your vehicle breaks down on the road, move to the shoulder If the engine cannot be started because the battery is weak or and turn on the hazard warning flashers. If there is no shoulder, dead, you can start it with the battery from another vehicle or the shoulder is not safe, drive in the right lane slowly, with using jumper cables.
Page 520 For emergencies 3. You could be injured if the vehicles move. Set the parking 5. For vehicles equipped with turbocharger, remove the air brake firmly on each vehicle. Put an automatic transaxle, duct and then the battery upper cover. CVT or Twin Clutch SST in “P” (PARK) or a manual (Refer to “Removing and installing the battery upper transaxle in “N”...
Page 521 For emergencies 7. Connect one end of the other jumper cable to the negative 9. After the engine is started, disconnect the cables in the (-) terminal of the booster battery (B), and the other end to reverse order from the way you connected them. the engine block of the vehicle with the low battery (A) at 10.
Page 522: Engine Overheating
3. Check that the cooling fan is running. If the fan is not turning, stop the engine immediately and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance. WARNING To avoid personal injury, keep hands, hair, jewelry and clothes away from the cooling fan.
Page 523 You can start driving again when the bar slowly add coolant. graph for the engine coolant temperature display returns to the normal zone. 11. Have your vehicle checked by your authorized Mitsubishi Motors dealer or a repair facility of your choice.
Page 524 For emergencies Tools and jack Tools N00832600124 N00836600265 Storage The tools and jack are stowed in the trunk. 1- Tool bag 2- Bar 3- Wheel nut wrench 1- Tools 2- Jack...
Page 525 For emergencies Jack To remove N00832700255 Turn the shaft end (1) so that the jack contracts, then remove it Before removing the jack, lift up the luggage floor board. from the storage bracket (C). For front-wheel drive vehicles, pull the luggage floor board (A) rearward to release the hooks (B), and then lift it up.
Page 526: How To Change A Tire
For emergencies How to change a tire 5. To prevent the vehicle from rolling when it is raised on the jack, place chocks or blocks (A) at the tire that is diago- N00836900734 nally opposite from the tire (B) you are changing. WARNING The jack should not be used for any purpose other than to change a tire.
Page 527 For emergencies Spare tire information WARNING N00849600298 Be sure to apply chocks or blocks to the correct tire Compact spare tire when jacking up the vehicle. If the vehicle moves The compact spare tire is designed to save space in the trunk. while jacked up, the jack could slip out of position, Its lighter weight makes it easier to use if a flat tire occurs.
Page 528 (A) rearward to release the hooks (B), and then lift properly. Have the tire replaced or repaired at an it up. authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. If your vehicle has aluminum type wheels, you can use the same wheel nuts on the compact spare tire wheel.
Page 529 For emergencies NOTE 2. To remove the spare tire, remove the installation clamp Put the spare tire under the vehicle body near the jack. (C) by turning it counterclockwise. This makes it safer if the jack slips out of position. NOTE The clamp cannot be used for a normal size tire.
Page 530 For emergencies To change a tire 2. Place the jack under one of the jacking points (A) shown in the illustration. Use the jacking point closest to the tire N00849800388 1. On vehicles with wheel covers, first remove the covers you wish to change.
Page 531 For emergencies 3. Rotate the jack by hand until the flange portion (B) fits in 4. Insert the bar (D) into the wheel nut wrench (E). Then put the groove (C) at the top of the jack. the end of the bar into the shaft’s jack end, as shown in the illustration.
Page 532 For emergencies 6. Clean out any mud, etc. on the hub surface (F), hub bolts WARNING (G) or in the installation holes (H) in the wheel, and then The jack should not be used for any purpose other mount the spare tire. than to change a tire.
Page 533 For emergencies 7. [Vehicle with steel wheels] WARNING • Normal wheels and compact spare wheel Mount the spare wheel with the valve stem (I) facing Install the wheel nuts (tapered nuts) with their tapered outboard. If you cannot see the valve stem (I), you ends facing inward, then tighten by hand until the wheel is have installed the wheel backwards.
Page 534 For emergencies [Vehicle with aluminum wheels] • Compact spare wheel • Normal wheels Install the wheel nuts with their tapered ends facing Temporarily tighten the wheel nuts (flange nuts) until inward, then tighten by hand until the wheel is no longer their flange section comes in contact with the wheel and it loose.
Page 535 For emergencies 8. Lower the vehicle slowly by rotating the wheel nut 9. Tighten the nuts in the order shown in the illustration until wrench counterclockwise until the tire touches the each nut has been tightened to the torque listed here. ground.
Page 536 If the steering wheel vibrates when driving after changing the tire, have the tire checked for balance at your nearest authorized Mitsubishi Motors dealer or a repair facility of your choice. Do not mix one type of tire with another or use a dif- ferent size from the one listed.
Page 537 For emergencies Wheel covers (if so equipped) CAUTION N00849400166 Trying to remove the wheel cover with only your To remove bare hands can seriously injure your fingers. Wrap the tip of the bar with a cloth, insert it deeply into the notch provided in the wheel cover, and pry the cover away To install from the wheel.
Page 538 For emergencies 1. Align the tire air valve (C) and the wheel cover notch (D). 2. Push the bottom (F) of the wheel cover into the wheel. 3. Gently push in both sides (G) of the wheel cover and hold them in place with both knees.
Page 539 For emergencies Towing Type A N00837000745 If your vehicle needs to be towed If towing is necessary, we recommend you to have it done by a commercial tow truck service. When towing is required, transport the vehicle using a tow truck.
Page 540 For emergencies Towing the vehicle by a tow truck CAUTION [For front-wheel drive vehicle equipped with the CAUTION active stability control (ASC)] This vehicle must not be towed by a tow truck using If the vehicle is towed with the ignition switch in the sling lift type equipment (Type A) as illustrated.
Page 541: Operation Under Adverse Driving Conditions
For emergencies Operation under adverse driving conditions On wet roads N00837200590 CAUTION If your vehicle becomes stuck in sand, mud or snow Avoid flooded roads. Water is often deeper than it looks, and you could be seriously hurt by driving If your vehicle becomes stuck in snow, sand, or mud, it can into flood water.
Page 542 For emergencies On snowy or icy roads On a bumpy or rutted road When driving on a road covered with snow or ice, use Drive as slow as possible when driving on bumpy, rutted snow tires. Tire chains cannot be used on your vehicle. roads or over potholes.
Page 544: Vehicle Care And Maintenance
Vehicle care and maintenance Service precautions ......7- Brake pedal free play..... . . 7- 38 Catalytic converter .
Page 545: Service Precautions
If you discover a malfunction or other problem, have it cor- wrong way can injure you. Ask an authorized rected by an authorized Mitsubishi Motors dealer or a repair Mitsubishi Motors dealer or a repair facility of your facility of your choice.
Page 546: Catalytic Converter
Have an inspection made Do not park or run your vehicle in areas where com- by an authorized Mitsubishi Motors dealer or a repair bustible materials such as dry grass or leaves can facility of your choice as soon as possible.
Page 547: Engine Hood
Vehicle care and maintenance Engine hood To open Use the engine hood release lever (located under the instrument N00937500419 panel near the driver’s door) to unlock the engine hood. CAUTION Pull the lever toward you to release the engine hood latch. For vehicles with turbocharger, to avoid the risk of being burned, do not touch the air outlet (A) and air scoop (B) on the engine hood when the engine com-...
Page 548 Vehicle care and maintenance Release the safety lever and lift the engine hood. Support the engine hood with the hood prop. Insert the hood prop securely in the opening under the hood marked with an arrow. NOTE To prevent damage to the engine hood and wipers, make sure the wipers are at resting position when you open the CAUTION engine hood.
Page 549 Vehicle care and maintenance To close CAUTION Unlatch the prop from the engine hood and put it back in its Be careful not to trap your hands or fingers when retainer. closing the engine hood. Make sure the engine hood is firmly closed before driving.
Page 550: View Of The Engine Compartment
Vehicle care and maintenance View of the engine compartment Vehicles with turbocharger N00937600553 Except for vehicles with turbocharger 1- Power steering fluid reservoir 2- Air cleaner filter 3- Brake fluid/Clutch fluid reservoir (if so equipped) 4- Engine coolant reservoir 5- Windshield washer fluid reservoir 6- Engine oil level dipstick 7- Radiator cap 8- Engine oil filler cap...
Page 551: Engine Oil And Oil Filter
Vehicle care and maintenance Engine oil and oil filter Except for vehicles with turbocharger N00937700785 Except for vehicles with engine cover To check and refill engine oil It is normal for an engine to use oil. You may need to add oil between the recommended oil change intervals.
Page 552 Vehicle care and maintenance Vehicles with turbocharger WARNING Used engine oil is poisonous, and can damage your skin. Prolonged and repeated contact may cause serious skin disorders, including dermatitis and can- cer. Don’t let used oil touch your skin. Wash thor- Good oughly after working with it.
Page 553 If you cannot find oils with the ILSAC certification symbol, use an API classification SM or higher oil with the following Mitsubishi Motors recommends using only engine oils with the label. ILSAC certification symbol on the front of the container.
Page 554 Vehicle care and maintenance Recommended engine oil viscosity Vehicles with turbocharger N00955000041 Use engine oil with the proper thickness for the outdoor tem- peratures where you will be driving. Except for vehicles with turbocharger NOTE Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.
Page 555: Engine Coolant
256 psi remove the radiator cap (B) except when you check the coolant (1.8 MPa). A Genuine Mitsubishi oil filter is the best replace- freeze point or replace the antifreeze coolant.
Page 556 If you need to add coolant often, or if the level in the reserve tank does not drop when the engine cools, the cooling system should be pressure-tested for leaks. Take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice for testing. CAUTION Do not use alcohol or methanol antifreeze or any engine coolants that contain them.
Page 557: Radiator Cap
If the temperature of the engine coolant does not rise after Mitsubishi Parts radiator cap, or an approved equivalent. the engine is warmed-up, take your vehicle to an autho- rized Mitsubishi Motors dealer or a repair facility of your WARNING choice to have the thermostat checked, and replaced if Wait for the engine to cool down before opening the necessary.
Page 558: Air Cleaner Filter
Vehicle care and maintenance Air cleaner filter 1. Remove the clips (A), then remove the duct (B). N00937900338 Except for vehicles with turbocharger The air cleaner filter will get dirty and dusty from use and not filter properly. Replace it with a new filter using the schedule in the “WARRANTY AND MAINTENANCE MANUAL”.
Page 559 Vehicle care and maintenance 2. Except for vehicles with turbocharger, while holding 3. Unclamp and take out the air cleaner filter. down the tab (C), pull out the connector (D). Except for vehicles with turbocharger Except for vehicles with turbocharger Vehicles with turbocharger 7-16...
Page 560 4. Install the air cleaner filter and put the cover back on in its Vehicles with turbocharger original position. NOTE Genuine Mitsubishi Motors Parts are recommended when replacing the air cleaner filter. After replacing the air cleaner filter, make sure that the hinges at the bottom of cover are firmly set.
Page 561: Manual Transaxle Oil (If So Equipped)
The continuously variable transmission (CVT) should be main- Refill or change the oil according to the table. tained and serviced by an authorized Mitsubishi Motors dealer or a repair facility of your choice to obtain the best perfor- Oil type mance and longest life.
Page 562: Twin Clutch Sportronic Shift Transmission
The Twin Clutch Sportronic shift transmission (Twin Clutch the table. SST) should be maintained and serviced by an authorized Mitsubishi Motors dealer or a repair facility of your choice to Oil type obtain the best performance and longest life. It is important that the transmission fluid is kept at the correct level.
Page 563: Rear Axle Oil (All-Wheel Drive Models)
Vehicle care and maintenance Rear axle oil (All-wheel drive models) AWC control fluid (if so equipped) N00915200155 N00915300026 Whenever the oil level is checked, add oil as necessary to To check the fluid level maintain the proper level. Remove the lid on the trunk room right side trim. Fill or change oil according to the table.
Page 564: Washer Fluid
If the fluid level falls markedly in a short length of time, it indi- cates leaks from the brake system. If this occurs, have the vehicle checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. 7-21...
Page 565: Power Steering Fluid
Do not mix brands of brake fluid. Keep the reservoir tank cap closed to keep the brake fluid from evaporating. Fluid type Lubricant Genuine Mitsubishi Power Steering Fluid 7-22...
Page 566: Vehicles With Turbocharger
Vehicle care and maintenance Battery To remove 1. Remove the clips (A), and then remove the air duct (B). N00939100783 The condition of the battery is very important for quick starting and to keep the vehicle’s electrical system working properly. Check the battery regularly.
Page 567 Vehicle care and maintenance To install 2. Turn the plastic nuts (C) counterclockwise, and then remove the battery upper cover (D). 1. Install the battery upper cover (A) onto the battery, and then push the plastic nuts (B) in the direction shown by the arrows to secure the cover.
Page 568: To Check The Battery Indicator
This is not conclusive and if battery performance is suspect, have the battery and charging system tested by an authorized Mitsubishi Motors dealer or a repair facility of your choice. If it is white, that cell is low on charge and the battery may only need charg- ing.
Page 569: Checking Battery Electrolyte Level
Vehicle care and maintenance NOTE Vehicles with turbocharger For vehicles equipped with a turbocharger, the battery upper cover must be removed to check the battery indica- tor. Checking battery electrolyte level N00901500014 The electrolyte level must be between the limits shown on the outside of the battery.
Page 570: Disconnection And Connection
It is recommended that you have your battery and charging sys- NOTE tem checked by an authorized Mitsubishi Motors dealer or a For vehicles equipped with turbocharger, remove the bat- repair facility of your choice before the start of cold weather. If tery upper cover before disconnecting the terminal of bat- necessary, have it charged.
Page 571 If the electrolyte level is very low, have the battery Never short-circuit the battery. This could cause it checked at an authorized Mitsubishi Motors dealer to overheat and be damaged. or a repair facility of your choice. Keep sparks, cigarettes, and flames away from the Battery terminals and related accessories contain battery because the battery could explode.
Page 572 Vehicle care and maintenance Tires Intended outboard sidewall: • The sidewall that contains a whitewall, bears white let- N00939200481 tering or bears manufacturer, brand, and/or model name WARNING molding that is higher or deeper than the same molding on the other sidewall of the tire, Driving with tires that are worn, damaged or improperly inflated is dangerous.
Page 573: Tire Markings
Vehicle care and maintenance Cord: the strands forming the plies in the tire. Size Designation Rim: a metal support for a tire or a tire and tube assembly EXAMP :P215/65R15 upon which the tire beads are seated. Rim diameter: nominal diameter of the bead seat. Passenger car tire size based on U.S.A.
Page 574 Vehicle care and maintenance Service Description Maximum Pressure Maximum Pressure indicates the maximum permissible EXAMPLE: cold tire inflation pressure for this tire. Load index Tire Identification Number (TIN) A numerical code associated with the maximum The TIN may be found on one or both sides of the tire but load a tire can carry.
Page 575: Tire Inflation Pressures
Vehicle care and maintenance Tire inflation pressures Treadwear, Traction and Temperature Grades N00939300730 Treadwear Proper tire inflation pressure is essential for the safe and satis- The treadwear grade is a comparative rating based on the factory operation of your vehicle. The wrong tire pressure will wear rate of the tire when tested under controlled conditions cause problems in three major areas: on a specified government test course.
Page 576 Vehicle care and maintenance The recommended inflation pressures should be used for the Check your tires each time you refuel. If one tire looks lower tires listed below. than the others, check the pressure for all of them. You should also take the following safety precautions: Except for vehicles with turbocharger Keep your tires inflated to the recommended pressures.
Page 577: Tire Maintenance
Consult an authorized Mitsubishi Motors dealer or a repair facility of your choice before using wheels that you have. Only Mitsubishi Motors genuine wheels should be used, because your vehicle is equipped with a tire pressure monitoring system.
Page 578: Tread Wear Indicators
Vehicle care and maintenance Tread wear indicators Tread wear indicators are built into the original equipment tires on your vehicle to help you know when your tires should be N00939800214 replaced. Many states have laws requiring that you replace your tires at this point. These indicators are molded into the bottom of the tread grooves and will appear when the tire tread is worn down to 1/16 inch (1.6 mm).
Page 579: Tire Rotation
Abnormal wear is usually caused by a wrong tire pressure, wheels that are not aligned properly, wheels that are out-of-balance, or severe braking. Check with an authorized Mitsubishi Motors dealer or a repair Front facility of your choice to find out the reason for uneven tread wear.
Page 580: Tire Chains
Front wheels. Only Mitsubishi Motors genuine wheels should be used, because your vehicle is equipped with a tire pressure monitoring system. Use of another type of wheel risks air leaks and sen- sor damage, as it will not be possible to install the tire pressure sensor properly.
Page 581: Brake Pedal Free Play
.2 to .4 inch (4 to 9 mm) .1 to .3 inch (3 to 8 mm) If the free play is not within these limits, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice for adjustment. 7-38...
Page 582: Parking Brake Lever Stroke
Parking brake lever stroke: This procedure is described in the vehicle service manual and 3 to 5 notches can be carried out by an authorized Mitsubishi Motors dealer. Also check to see if the lever stays gripped by the ratchet after pulling.
Page 583: Wiper Blades
To be sure the emission-control system works properly, have your vehicle inspected and maintained by an authorized Mitsubishi Motors dealer or a repair facility of your choice fol- lowing the schedule in the “WARRANTY AND MAINTE- NANCE MANUAL”.
Page 584: Spark Plugs
Vehicle care and maintenance Spark plugs NOTE To meet government regulations and promote cleaner air, N00940900198 Spark plugs must fire properly for good engine performance your vehicle is equipped with an onboard diagnostic sys- and emission-control. tem (OBD). The engine electronic control module that controls OBD functions stores various data (especially Type 1 Iridium tipped type...
Page 585: Ignition Cables
N00941400116 If the fuel-vapor vent line is clogged or damaged, the fuel- N00950100050 Have the valve clearance checked at an authorized Mitsubishi vapor mixture will escape, polluting the air. Motors dealer at the mileage specified in the “WARRANTY Have the system checked at an authorized Mitsubishi Motors AND MAINTENANCE MANUAL”.
Page 586: General Maintenance
But, if any of these parts stops working properly, your vehicle performance could suffer. Have these items checked if you notice a problem with them. See your authorized Mitsubishi Motors dealer for assistance, if you have any questions. Disc brake pads, rear drum brake linings and...
Page 587: Air Conditioning Compressor
Vehicle care and maintenance Drive belt (for generator, power steering pump, Vehicles with turbocharger air conditioning compressor) N00941900267 Check the tension of the drive belt. Make certain that the indi- cator (A) is between the specified lines as shown in the illustra- tion.
Page 588: Hood Lock Release Mechanism And Safety Catch
Vehicle care and maintenance Exhaust system Hood lock release mechanism and safety catch N00942200108 N00942500114 The hood lock release mechanism and hood safety catch should WARNING be checked, cleaned, and oiled when needed for easy move- ment and to stop rust and wear. Use Multipurpose Grease Carbon monoxide gas from your vehicle’s exhaust is NLGI Grade 2 sparingly for all sliding parts of the hood latch poisonous.
Page 589: For Cold And Snowy Weather
The ventilation slots in front of the windshield should be In case of a melted fusible link, see your authorized Mitsubishi brushed clear after a heavy snowfall so that the operation of the Motors dealer or a repair facility of your choice for inspection heating and ventilation systems will not be impaired.
Page 590 Vehicle care and maintenance Fuses 1. Open the fuse lid and pull to remove it. N00942800801 Fuse block location To prevent damage to the electrical system from short-circuit- ing or overloading, each individual circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Page 591 Vehicle care and maintenance 2. For vehicles with the bottom cover, use the puller to 3. To put back the fuse lid, line up the fuse lid hook (B) with loosen the 2 clips (A) and push down the bottom cover. the clamp (C) on the instrument panel and push the lid The puller is in the fuse block in the engine compartment.
Page 592 Vehicle care and maintenance Fuse load capacities Engine compartment N00954800114 In the engine compartment, the fuse block is located as shown This fuse list shows the names of the electrical systems and in the illustration. their fuse capacities. There are spare fuses in the cover of the fuse block in the engine compartment.
Page 593 Vehicle care and maintenance Passenger compartment fuse location table Symbol Electrical system Capacity Passenger compartment fuse location Heater 30 A* Stop lights 15 A (Brake lights) Rear fog light 10 A Main fuse block Sub fuse block Windshield wiper 30 A Optional 10 A Door locks...
Page 594 Vehicle care and maintenance Engine compartment fuse location table Symbol Electrical system Capacity Accessory socket 15 A Engine compartment fuse location Power window control 30 A* Defogger 30 A* Heated 7.5 A outside rearview mirrors 115V Power outlet 15 A Power seats 25 (20) A Heated seats...
Page 595 Vehicle care and maintenance Symbol Electrical system Capacity Symbol Electrical system Capacity Headlight Front fog lights 15 A (low/high Discharge 20 A Engine 7.5 A beam) (left) Headlight Automatic transaxle 20 A (low/high Discharge 20 A Horn 10 A beam) (right) Alternator 7.5 A Headlight...
Page 596 Vehicle care and maintenance There are no 7.5 A, 25 A or 30 A spare fuses. If a fuse of one of Symbol Electrical system Capacity these capacities blows, replace it temporarily by borrowing one Except for of the fuses indicated below. vehicles with 15 A 7.5 A: 10 A spare fuse...
Page 597: Fuse Replacement
Vehicle care and maintenance Fuse replacement 3. Clamp it on the fuse you wish to remove, and pull the fuse straight out from the fuse block. N00954900027 1. Before replacing a fuse, always turn off the electrical item connected to the fuse and turn the ignition switch to the “LOCK”...
Page 598 CAUTION Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the problem checked. Never use a fuse with a capacity greater than the one listed or any substitute, such as wire, foil etc.
Page 599: Replacement Of Light Bulbs
If you are unsure of how to carry out the work as required, it is recommended that these procedures be carried out by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Be careful not to scratch the vehicle body when removing a light and lens.
Page 600 It is not possible to repair or replace only the bulb for the 6- Side turn signal light — side turn-signal light. Check with an authorized Mitsubishi Motors dealer or a [For vehicles with high intensity discharge headlights] repair facility of your choice when the light needs to be ANSI Trade repaired or replaced.
Page 601 Vehicle care and maintenance NOTE Rear The high-mounted stop light uses LEDs rather than bulbs. For repair and replacement, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. ANSI Trade Description Wattage No. or Bulb type High-mounted stop —...
Page 602 Vehicle care and maintenance Headlights (low beam, except for vehicles with Inside high intensity discharge headlights) N00950400460 N00943100830 1. For vehicles equipped with turbocharger, when replacing the bulb on the driver’s side, remove the bolt (A) holding down the relay box and move the relay box toward the rear of the vehicle.
Page 603 Vehicle care and maintenance 2. For vehicles equipped with turbocharger, when replacing 3. Turn the bulb (C) counterclockwise, and then remove the the bulb on the passenger’s side, lift up the engine coolant headlight bulb with holder. reservoir (B). *- Front of the vehicle *- Front of the vehicle 7-60...
Page 604 Vehicle care and maintenance 4. While holding down the tab (D), pull out the bulb (E). CAUTION Handle halogen light bulb with care. The gas inside a halogen light bulb is highly pressurized, so drop- ping, knocking, or scratching a halogen light bulb can cause it to shatter.
Page 605 Vehicle care and maintenance Headlights (high beam, except for vehicles with 2. Turn the cap (B) counterclockwise to remove it. high intensity discharge headlights) N00943100843 1. When replacing the bulb on the front passenger’s side, remove the bolt (A) holding down the washer tank spout and move the spout toward the rear of the vehicle.
Page 606 Vehicle care and maintenance 3. Turn the bulb (C) counterclockwise to remove it. 4. While holding down the tab (D), pull out the bulb (E). 5. To install the bulb, perform the removal steps in reverse. *- Front of the vehicle 7-63...
Page 607 Vehicle care and maintenance Daytime running lights (for vehicles with high CAUTION intensity discharge headlights) Handle halogen light bulb with care. The gas inside N00900300060 a halogen light bulb is highly pressurized, so drop- 1. When replacing the bulb on the front passenger’s side, ping, knocking, or scratching a halogen light bulb remove the bolt (A) holding down the washer tank spout can cause it to shatter.
Page 608 Vehicle care and maintenance 2. Turn the cap (B) counterclockwise to remove it. 3. Turn the socket (C) counterclockwise to remove it. *- Front of the vehicle *- Front of the vehicle 7-65...
Page 609 Adjustment of headlight aim N00943200121 The alignment of the headlights should be checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. 5. To install a bulb, perform the removal steps in reverse. 7-66...
Page 610 Vehicle care and maintenance Parking and side-marker lights (except for vehi- 2. For vehicles equipped with turbocharger, when replacing cles with high intensity discharge headlights) the bulb on the passenger’s side, lift up the engine coolant reservoir (B). N00917300394 1. For vehicles equipped with turbocharger, when replacing the bulb on the driver’s side, remove the bolt (A) holding down the relay box and move the relay box toward the rear of the vehicle.
Page 611 Vehicle care and maintenance 3. Turn the socket (C) counterclockwise to remove it. 4. Pull the bulb out of the socket. 5. To install the bulb, perform the removal steps in reverse. *- Front of the vehicle 7-68...
Page 612 Vehicle care and maintenance Parking and side-marker lights (for vehicles with Vehicles with high intensity discharge headlights) turbocharger N00917300437 1. To create enough work space, turn the steering wheel all the way in the direction opposite to the side you wish to replace.
Page 613 Vehicle care and maintenance 3. Turn the socket (D) counterclockwise to remove it. 4. Pull the bulb out of the socket. 5. To install the bulb, perform the removal steps in reverse. 7-70...
Page 614 Vehicle care and maintenance Front turn signal lights Vehicles with turbocharger N00943400237 1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper cover (D). Except for vehicles with turbocharger 7-71...
Page 615 Vehicle care and maintenance 2. Remove the entire socket and bulb assembly (E) by turn- 3. Remove the bulb by pulling it out. ing it counterclockwise. 4. To install the bulb, perform the removal steps in reverse. *- Front of the vehicle 7-72...
Page 616 Vehicle care and maintenance Front fog lights (except for vehicles with turbo- 2. Remove the screws (B) and pull the entire light unit out. charger) (if so equipped) N00943600561 1. Remove the screw (A) and pull the cover out. 7-73...
Page 617 Vehicle care and maintenance NOTE 3. Push the connector (D) to disconnect and remove the fog When unfastening the screws, be careful not to mistakenly light. move the beam position adjustment screw (C). 7-74...
Page 618 Vehicle care and maintenance 4. Remove the bulb assembly (E) by turning it counterclock- 5. To install the bulb, perform the removal steps in reverse. wise. NOTE When mounting the cover, align the hooks (F) on the cover with the hole in the body. 7-75...
Page 619 Vehicle care and maintenance Front fog lights (for vehicles with turbocharger) CAUTION N00943600574 Handle halogen light bulbs with care. The gas inside 1. Remove the screw (A). a halogen light bulb is highly pressurized, so drop- ping, knocking, or scratching a halogen light bulb can cause it to shatter.
Page 620 Vehicle care and maintenance 2. Pull the cover out in the direction of the arrow shown in 3. Remove the screws (B) and pull the entire light unit out. the illustration. Passenger’s side Driver’s side 7-77...
Page 621 Vehicle care and maintenance NOTE 4. Push the connector (D) to disconnect and remove the fog When unfastening the screws, be careful not to mistakenly light. move the beam position adjustment screw (C). 7-78...
Page 622 Vehicle care and maintenance 5. Remove the bulb assembly (E) by turning it counterclock- 6. To install the bulb, perform the removal steps in reverse. wise. NOTE When mounting the cover, align the hook (F) on the cover with the hole in the body. 7-79...
Page 623: Rear Combination Lights
Vehicle care and maintenance Rear combination lights CAUTION N00943700386 Handle halogen light bulbs with care. The gas inside Tail and stop lights, rear turn signal lights and rear a halogen light bulb is highly pressurized, so drop- side-marker lights ping, knocking, or scratching a halogen light bulb 1.
Page 624 Vehicle care and maintenance 2. Remove the light unit in the rear direction. 3. Remove the socket and bulb assemblies by turning them counterclockwise. B- Tail and stop light C- Rear turn signal light D- Rear side-marker light 7-81...
Page 625 Vehicle care and maintenance 4. Remove the bulb by pulling it out. 5. To install the bulb, perform the removal steps in reverse. NOTE Tail and stop light and Rear side-marker light When mounting the light unit, align the pins (E) on the Rear turn signal light light unit with the holes in the body.
Page 626 Vehicle care and maintenance Tail lights and back-up lights 2. Remove the socket and bulb assemblies by turning them counterclockwise. 1. Open the trunk lid. Remove the clips (A) and remove the cover (B). C- Tail light D- Back-up light 7-83...
Page 627: License Plate Light
Vehicle care and maintenance License plate light 3. Remove the bulb by pulling it out. N00944000331 Back-up light Tail light 1. Remove the screws (A) from the license plate light lens (B). Then, remove the lens and gasket (C), and withdraw the bulb.
Page 628 Vehicle care and maintenance 2. Remove the socket and bulb assembly together by turning 3. Remove the bulb by pulling it out. it counterclockwise. 4. To install the bulb, perform the removal steps in reverse. 7-85...
Page 629 Vehicle care and maintenance Dome light (front)/Reading lights (if so equipped) 2. While holding down the tab (A), pull out the bulb. N00944500206 1. Insert a screwdriver into the notch of the light assembly. Gently pry to remove the lens. NOTE Wrap a cloth around the tip of the screwdriver to keep from scratching the lens.
Page 630 Vehicle care and maintenance Dome light (rear) 3. To install the bulb, perform the removal steps in reverse. (if so equipped) N00944100260 NOTE 1. Insert a screwdriver into the notch of the light assembly Before replacing the bulb, put the dome light (front)/read- and pry gently to remove the lens.
Page 631 Vehicle care and maintenance 2. While holding down the tab (A), pull out the bulb. 3. To install the bulb, perform the removal steps in reverse. NOTE Before replacing the bulb, put the dome light (rear) switch into the “OFF” position. When mounting the lens, align the tab (B) with the hole on the vehicle body.
Page 632: Vehicle Care Precautions
If you are not sure, contact an authorized Mitsubishi Motors dealer for help in choosing these materials. CAUTION Cleaning products can be dangerous. Some are poi- sonous.
Page 633: Cleaning The Inside Of Your Vehicle
Vehicle care and maintenance Cleaning the inside of your vehicle Upholstery N00945500131 N00945200079 1. To maintain the value of your new vehicle, maintain the After washing the inside of your vehicle with any cleaner, wipe upholstery carefully and keep the interior clean. it dry in a shady, well ventilated area.
Page 634: Cleaning The Outside Of Your Vehicle
Vehicle care and maintenance Cleaning the outside of your vehicle Genuine leather (if so equipped) N00945600161 N00945700061 1. To clean, lightly wipe the leather with a soft cloth soaked To protect your vehicle’s finish, wash it often and thoroughly. in a 5 % solution of gentle soap and water. If desired, you may wax your vehicle using a nonabrasive auto- mobile wax.
Page 635 Vehicle care and maintenance CAUTION CAUTION When using high-pressure water to wash a vehicle When washing the underside of your vehicle or the equipped with the F.A.S.T.-key system, keep the wheels, wear a pair of gloves to protect your hands. water from spraying on the open button on the If your vehicle has rain sensor wipers, place the trunk.
Page 636 Vehicle care and maintenance NOTE CAUTION When the door is frozen, opening it by force may tear off Do not put wax on the areas having black matte or crack the rubber gasket installed around the door. Pour coating because it can cause uneven discoloration, warm water to melt the ice.
Page 637: Chrome Parts
Vehicle care and maintenance Cleaning plastic parts Aluminum wheels (if so equipped) N00946300178 N00946500196 Use a sponge or chamois to clean these parts. 1. Remove dirt using a wet sponge. If a vehicle wax sticks to a gray or black rough surface of the 2.
Page 638: Engine Compartment
Vehicle care and maintenance Wiper blades N00946700097 Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer clean the wind- shield and rear window properly. Cleaning the sunroof (if so equipped) N00946800072...
Page 640: Customer Assistance/ Reporting Safety Defects
Customer assistance/Reporting Safety Defects Consumer information (For vehicles sold in U.S.A.) ....8- Reporting Safety Defects ....8- Important facts to know in case of an accident .
Page 641: Consumer Information
Customer assistance/Reporting Safety Defects Consumer information WARNING (For vehicles sold in U.S.A.) The traction grade assigned to this tire is based on N01047100100 straight-ahead braking traction tests, and does not This information is provided in compliance with the require- include acceleration, cornering, hydroplaning, or ments of the National Highway Traffic Safety Administration, peak traction characteristics.
Page 642: Reporting Safety Defects
Transport Can- paign. However, NHTSA cannot become involved in indi- ada, in addition to notifying Mitsubishi Motor Sales of Canada, vidual problems between you, your dealer, or Mitsubishi Inc. You may write to: Motors North America, Inc.
Page 643 Customer assistance/Reporting Safety Defects For vehicles sold in Puerto Rico For vehicles sold in American Samoa To contact Mitsubishi Motor Sales of Caribbean, Inc. To contact Pacific Marketing Inc. call 1-800-981-0452 or write to: call 684(699)9140 or write to: Mitsubishi Motor Sales of Caribbean, Inc.
Page 644: Specifications
Key information to discuss with your insurance a choice. So, if you want genuine Mitsubishi Motors parts, you may have to specifically request them. Make certain your company insurance company understands imitations are not to be used in Understand your repair estimate before approving repairs.
Page 646: Table Of Contents
Specifications Vehicle labeling ......9- Vehicle dimensions ......9- Vehicle weights .
Page 647: Vehicle Labeling
Specifications Vehicle labeling Vehicles with turbocharger N01147400553 Keep a record of the chassis number and vehicle identification number. Such information will assist the police if your vehicle is stolen. Except for vehicles with turbocharger 1 - Vehicle emission control information label The vehicle emission control information label is affixed on the inside panel of the engine hood.
Page 648: Chassis Number
Specifications Chassis number The chassis number is stamped on the floor under the front pas- senger seat. It is visible by pulling back the carpet flap as shown in the illustration. 4 - Vehicle information code plate The vehicle information code plate is located on the front pas- senger door sill.
Page 649: Engine Serial Number
Specifications Engine serial number Tire and loading information placard The engine serial number is stamped on the cylinder block as N01148100528 The tire and loading information placard is located on the shown in the illustration. driver’s door sill. *- Front of the vehicle...
Page 650: Certification Label
Specifications Certification label Type 1 N01148200196 The certification label (A) is located on the driver’s door sill. Type 2...
Page 651: Vehicle Dimensions
Specifications Vehicle dimensions N01147500378 Overall length 180.0 in (4,570 mm) Overall width 69.4 in (1,760 mm) Overall height 58.7 in (1,490 mm) Wheel base 103.7 in (2,635 mm)
Page 652: Vehicle Weights
Specifications Vehicle weights N01147600760 Item Except for vehicles with turbocharger Vehicles with turbocharger Gross vehicle weight rating (GVWR) 4,079 lb (1,850 kg) 4,388 lb (1,990 kg) Front 2,227 lb (1,010 kg) 2,381 lb (1,080 kg) Gross axle weight rating (GAWR) Rear 2,007 lb (910 kg) 2,161 lb (980 kg)
Page 653: Engine Specifications
Specifications Engine specifications N01147700367 2.0 liter Item 2.4 liter Vehicles without turbo- Vehicles with turbocharger charger Engine model 4B11 4B12 Engine displacement 121.9 CID (1,998 cm³) 144.0 CID (2,360 cm³) No. of cylinders and cylinder arrange- 4 in-line ment Bore 3.39 in (86.0 mm) 3.46 in (88.0 mm) Stroke...
Page 654 Specifications Battery N01147800182 75D23L Battery is a 12 volt type.
Page 655: Tires And Wheels
4.5 in (114.3 mm) Offset 1.81 in (46 mm) PCD: Pitch Circle Diameter (installation holes) NOTE Contact an authorized Mitsubishi Motors dealer for details on the combination used on your vehicle. These tires satisfy vehicle loading conditions described in this owner’s manual. 9-10...
Page 656: Refill Capacities
4.5 qt (4.3 L) 2.4 liter Oil filter .32 qt (0.3 L) Power steering As required Genuine Mitsubishi Power Steering Fluid DiaQueen NEW MULTI GEAR OIL API classifica- Manual transaxle 2.6 qt (2.5 L) tion GL-3 SAE 75W-80 Continuously variable transmission (CVT) 7.5 qt (7.1 L)
Page 657 Specifications Item Capacity Lubricants Hood lock release mechanism and safety catch As required Multipurpose type grease NLGI Grade 2 Manual 7.4 qt (7.0 L) transaxle Engine coolant 7.4 qt (7.0 L) Long Life Antifreeze Coolant or an equivalent {Includes .63 qt (0.65 L) in reserve tank} Twin Clutch 7.9 qt (7.5 L) Washer fluid...
Page 658: Table Of Contents
Alphabetical index Audio AM/FM electronically tuned radio with CD player 5-52 AM/FM electronically tuned radio with 6 CD Accessory (installation) 1-8 autochanger 5-80 ACD (Active center differential system) 3-128 Error codes 5-115 5-117 ACD control mode display 3-129 Handling of compact discs 5-119 ACD control mode switch 3-129 Steering wheel audio remote control switch 5-112 ACD warning display 3-130...
Page 659: Table Of Contents
Alphabetical index Brake Clutch Anti-lock braking system 3-134 Fluid 7-21 9-11 Braking 4-6 Pedal free play 7-38 Fluid 7-21 9-11 Coat hooks 3-284 Combination headlights and dimmer switch 3-217 Hose 7-43 Coming home light 3-223 Parking brake 3-74 Consumer information 8-2 Parking brake lever stroke 7-39 Continuously variable transmission (CVT) 3-93 Pedal 3-131...
Page 660 Alphabetical index Dome light/Reading lights Bulb capacity 7-59 Replacement 7-86 Filling the fuel tank 1-4 Switch 3-274 Floor console box 3-281 Doors Fluid 9-11 Lock 3-52 AWC control fluid 7-20 Power door locks 3-55 Brake fluid 7-21 9-11 Drive belt 7-44 Clutch fluid 7-21 9-11 Driving during cold weather 4-5...
Page 661: Table Of Contents
Alphabetical index Fuel Heater without air conditioning function 5-6 Fuel economy 4-2 High beam indicator 3-211 Fuel hoses 7-42 Hill start assist (vehicles with Twin Clutch SST) 3-133 Modification/alterations to the electrical or fuel systems 1-9 Hood lock release mechanism and safety catch 7-45 Tank capacity 1-5 9-11 Horn switch 3-236...
Page 662: Table Of Contents
Alphabetical index Operation under adverse driving conditions 6-24 Outside rearview mirrors 3-79 Overheating 6-5 Labeling 9-2 License plate light Bulb capacity 7-56 Replacement 7-84 Parking 4-7 Limited-slip differential 3-131 Parking brake 3-74 Parking brake lever stroke 7-39 Loading information 4-8 Polishing 7-93 Lubricants 9-11 Power brakes 3-132...
Page 663: Table Of Contents
Alphabetical index Rear turn signal lights Seat belt extender 2-21 Bulb capacity 7-56 Seat belt instructions 2-15 Replacement 7-80 Seat belt use during pregnancy 2-21 Rear window defogger switch 3-235 Service brake 3-131 Rearview mirror Service precautions 7-2 Inside 3-77 Snow tires 7-37 Outside 3-79 Spark plugs 7-41...
Page 664: Table Of Contents
Alphabetical index Tires 7-29 Twin Clutch SST (Sportronic Shift Transmission) 3-105 How to change a tire 6-9 Fluid 7-19 9-11 Inflation pressure 7-32 Gearshift lever operation 3-106 Maintenance 7-34 Gearshift lever position display 3-108 Quality grading 8-2 Manual shift 3-116 Replacing tires and wheels 7-34 Manual shift display 3-121 Rotation 7-36...
Page 665 Alphabetical index Wheel Covers 6-20 Specification 9-10 Wiper Rain sensor 3-230 Windshield 3-228 Wiper blades 7-40...
Page 669 How to calculate your gasoline mileage You can calculate your miles-per-gallon or kilometers-per-litre 3. Refill the fuel tank. Record the odometer mileage again, by using the following process: as well as the gallons/litres of fuel used. 4. Subtract the first mileage number from the second number 1.
Page 670: Maintenance Record
NOTE Name of Owner Date of Purchase Address of Owner Model of Vehicle Name and Address of Dealer Vehicle Identification Number Maintenance record Kilometers Service Performed Date Inspection and Maintenance Item Miles...

Mitsubishi LANCER Owner's Manual

Quick Links

Related Manuals for Mitsubishi LANCER

Summary of Contents for Mitsubishi LANCER