Mitsubishi LANCER Owner's Manual page 198

Table of Contents

The pull-ring (D) must be pulled up while the brake

pedal is depressed to move the gearshift lever.

The gearshift lever will move without pulling up the

pull-ring (D).

The pull-ring (D) must be pulled up to move the gear-

shift lever.

If the pull-ring is always pulled up when using the

gearshift lever, the gearshift lever may be acciden-

tally shifted into the "P" (PARK) or "R"

(REVERSE) position. Do not pull up the pull-ring

when making shifts shown by

Always depress the brake pedal when shifting the

gearshift lever into another position from the "P"

(PARK) or "N" (NEUTRAL) position.

When beginning to drive, do not shift the gearshift

lever from the "P" (PARK) or "N" (NEUTRAL)

position while depressing the accelerator pedal.

Doing so is dangerous because the vehicle will

"jump" forward or backward.

For a shift indicated by

brake pedal before moving the gearshift lever. If you

attempt to move the gearshift lever before depressing the

brake pedal, the gearshift lever will be immovable.

Do not accelerate immediately after moving the gearshift

lever. It may take some time for the transmission to shift

to the selected gear.

When the gearshift lever is operated when the Twin

Clutch SST fluid temperature is low, the time required to

shift to the selected gear may be longer than usual.

Features and controls

in the illustration.

in the illustration, depress the

Show Quick Links

Table of Contents