Changing The Turn-Signal Sound (Type2) - Mitsubishi LANCER Owner's Manual
Hide thumbs
Also See for LANCER:
- Owner's manual (457 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Features and controls
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to display "ALARM" (rest time
setting).
Type 1
3
4. Lightly press the multi-information meter switch to select
the amount of time until the display appears.
5. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change the setting to the
selected time.
NOTE
If the battery is disconnected, the memory of the unit set-
ting is erased and is automatically set to the "OFF".
The drive time is reset when the ignition switch is in the
"OFF" position.
3-194
Type 2
Changing the turn-signal sound (Type2)
It is possible to change the turn-signal sound.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
2. Lightly press the multi-information meter switch to select
. (changing the turn-signal sound)
3. Press and hold the multi-information meter switch for
about 2 seconds or more to switch in sequence from 1
(turn-signal sound 1) → 2 (turn-signal sound 2) → 1
(turn-signal sound 1).
The setting changes to the selected turn-signal sound.
N00563500012
Hide quick links:
Advertisement
Table of Contents
