Coming Home Light (For Vehicles Equipped With The Color Multi-Information Display) - Mitsubishi LANCER Owner's Manual

Table of Contents

While the welcome light function is operating, perform

one of the following operations to cancel the function.

• Push the LOCK button (B) on the remote control trans-

• Turn the combination headlights and dimmer switch to

• Turn the ignition switch to the "ON" position.

It is possible to modify functions as follows:

• The headlights can be set to come on in the low beam

setting instead of the front side-marker and parking

• The welcome light function can be deactivated.

For details, consult a Mitsubishi Motors dealer.

Coming home light (for vehicles equipped with

the color multi-information display)

This function turns on the headlights in the low beam setting

for about 30 seconds after the ignition switch is turned to the

"LOCK" position.

1. Turn the combination headlights and dimmer switch to the

"OFF" or "AUTO" position (for vehicles equipped with

the automatic light control).

2. Turn the ignition switch to the "LOCK" position. Also, if

a key was used to start the engine, remove the key from

the ignition switch.

3. Within 60 seconds of turning the ignition switch to the

"LOCK" position, pull the turn signal lever toward you.

Features and controls

N00547300012

Show Quick Links

Table of Contents