Towing the vehicle by a tow truck
CAUTION
!
This vehicle must not be towed by a tow truck using
sling lift type equipment (Type A) as illustrated.
Using a sling lift will damage the bumper and front
end.
Do not tow all-wheel drive vehicles with the front or
rear wheels on the ground (Type B or Type C) as
illustrated. This could result in the driving system
damage or vehicle may jump at the carriage.
If you tow all-wheel drive vehicles, use Type D or
Type E equipment.
Do not tow continuously variable transmission
(CVT) vehicles with the driving wheels on the
ground (Type B) as illustrated. If the vehicle is
towed like this, the continuously variable transmis-
sion (CVT) fluid may not reach all parts of the
transmission, thus damaging it.
If you tow CVT vehicles, use Type C, D or E equip-
ment.
If the manual transaxle is malfunctioning or dam-
aged, transport the vehicle with the driving wheels
on a carriage (Type C, D or E) as illustrated.
CAUTION
!
[For front-wheel drive vehicle equipped with the
active stability control (ASC)]
If the vehicle is towed with the ignition switch in the
"ON" position and only the front wheels raised off
the ground (Type C), the ASC may operate, result-
ing in an accident. When towing the vehicle with the
front wheels raised, keep the ignition switch in the
"LOCK" or "ACC" position.
Towing manual transaxle vehicles with rear wheels off
the ground (Type B)
Place the gearshift lever in the "Neutral" position.
Turn the ignition switch to the "ACC" position and secure the
steering wheel in a straight-ahead position with a rope or tie-
down strap. Never place the ignition switch in the "LOCK"
position when towing.
Towing with front wheels off the ground (Type C)
Release the parking brake.
Place the gearshift lever in the "Neutral" position (manual
transaxle) or the selector lever in the "N" (NEUTRAL) posi-
tion (CVT).
WARNING
!
To prevent entry of exhaust gas from the towing
vehicle, set the selection switch to the recirculation
position.
For emergencies
6
6-23