Dynamic Ip (Dhcp) - D-Link DIR-860L User Manual
Wireless ac1200 dual-band gigabit cloud router usb 3.0
Hide thumbs
Also See for DIR-860L:
- User manual (173 pages) ,
- Quick installation manual (64 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
Section 3 - Configuration
If you are unsure what method you use to connect to the Internet, try this first. Cable modems usually use this type of connection
My Internet
Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
Connection:
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an IP address from
your ISP.
Primary/Secondary
Enter the Primary and Secondary DNS server IP addresses assigned by
DNS Server:
your ISP. These addresses are usually obtained automatically from your
ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical interface
MAC address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP. You can
use the Clone.Your.PC's.MAC.Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-860L User Manual
Dynamic IP (DHCP)
27
Advertisement
Table of Contents
