Table of Contents
Advertisement
POST Message
No keyboard detected
No IDE hard disk detected
CPU temperature too high
CPU fan failed
CPU voltage out of range
System completed Power-On Self Test • No action required
Computer now booting from operating • No action required
system
You may disable the ASUS POST Reporter™ in the BIOS setup. See
section "4.4.6 Speech Configuration".
3-4
Action
• Check your keyboard if it is properly
connected to the purple PS/2
connector on the rear panel.
• See section "2.7.1 Rear panel
connectors" for the location of the
connector.
• Make sure you have connected an
IDE hard disk drive to one of the
IDE connectors on the motherboard.
• Check CPU fan if it is working
properly.
• Check the CPU fan and make sure
it turns on after you apply power
to the system.
• Make sure that your CPU fan
supports the fan speed detection
function.
• Check your power supply and
make sure it is not defective.
• Call ASUS technical support for
assistance. See the "ASUS contact
information" on the inside front
cover of this manual.
Chapter 3: Powering up
Hide quick links:
Advertisement
Table of Contents
