D-Link DWL-7700AP Manual page 14

Wireless ag ap/bridge

Hide thumbs Also See for DWL-7700AP:

Table of Contents

DWL-7700AP User's Manual

Wireless Band: Choose IEEE802.11a or IEEE802.11g. IEEE802.11a is chosen here.

The DWL-7700AP can be configured to perform in any of four modes: wireless access

point, wireless bridge, multi-point bridge, and wireless client.

Access Point:

PtP Bridge:

PtMP Bridge:

AP Client:

D-Link Systems, Inc.

Access Point is the default setting. This mode is used to create a

wireless LAN.

PtP Bridge will allow you to connect two LANs together. The wireless

bridge mode will work only with another DWL-7700AP. Click to

enable and enter the MAC address of the remote bridge.

PtMP Bridge will allow you to connect multiple wireless LANs

together. Other wireless LANs must be using DWL-7700APs. Click

to enable and enter up to 16 remote AP MAC addresses.

AP Client will transform any IEEE 802.3 Ethernet device (e.g., a

computer, printer, etc.) into an 802.11a/g wireless client when it

communicates with another DWL-7700AP that is acting as an AP.

Click to enable and enter the MAC address of the root AP.

Using the Configuration Menu

Table of Contents