D-Link DWL-3500AP Configuration Manual page 28

Unified wired & wireless access system

Hide thumbs Also See for DWL-3500AP:

Table of Contents

14. Create Rule 3 to allow all other type of traffic between any source and any destination

since as mentioned earlier, there is an implicit "deny all" rule at the end of every

ACL.

15. From the Rule drop-down menu, select Create.

16. Enter 3 into the Rule ID field, Permit into the Action field, and True in the Match

Every field, and then click Submit.

Next, you must attach the ACL to port 0/1 and port 0/13 so that the rules are applied to

the appropriate wireless client traffic that goes through the APs connected to the switch.

1. From the ACL

2. Select port 0/1 from the Slot/Port drop-down menu.

3. Select IP ACL as the ACL Type.

4. Enter 1 as the sequence number, and click Submit.

5. Repeat the steps to associate ACL 100 with port 0/13.

Interface Configuration page,

Table of Contents

Show Quick Links

Table of Contents

Dwl-8500ap Dws-3000 series