Manual Feed Pickup Solenoid - Canon imageRUNNER 7095 Service Manual
Hide thumbs
Also See for imageRUNNER 7095:
- Brochure & specs (8 pages) ,
- Specifications (4 pages) ,
- Driver manual (180 pages)
Table of Contents
Advertisement
5) Remove the screw [1], and detach the
connector cover [2]; then, disconnect the
connector [3].
[2]
[3]
F-8-92
6) Open the manual feed tray.
7) Remove the 11 mounting screws [1], and
detach the manual feed tray pickup assembly
[2].
[1]
[1]
[1]
F-8-93
8) Remove the 2 mounting screws [1], and detach
the upper guide plate [2].
[2]
F-8-94
9) Remove the 2 mounting screws [1] found at the
bottom, and detach the lower cover [2].
[1]
F-8-95
10) Remove the 2 mounting screws [1], and
detach the middle guide plate [2].
[1]
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[2]
F-8-96
11) Remove the 2 mounting screws [2] of the
sensor unit [1].
[2]
F-8-97
12) Disconnect the connector [1], and detach the
sensor unit [2].
13) Remove the sensor [3] from the sensor unit
[2].
[3]
[2]
F-8-98
8.11.13 Manual Feed Pickup Solenoid
8.11.13.1 Position of the Pickup Roller
Release Solenoid of the Manual Feed
Tray
To make fine adjustments, slide the solenoid in
the direction of A so that the gap between the
shutter [1] and the shutter plate [2] is 0.4 +/-0.2
mm while the solenoid is being pulled.
A
F-8-99
Chapter 8
[1]
[2]
[1]
[1]
0010-9043
8-41
Advertisement
Chapters
Table of Contents
