Entering Or Selecting Service Modes; Exiting Service Modes; Backing Up Service Mode - Canon imageRUNNER 7095 Service Manual
Hide thumbs
Also See for imageRUNNER 7095:
- Brochure & specs (8 pages) ,
- Specifications (4 pages) ,
- Driver manual (180 pages)
Table of Contents
Advertisement
Chapter 17
17.1.2 Entering or selecting service modes
To execute a copier operation using a service mode, remove the cable from the external controller or the
cable from the network before entering the desired mode. Take care when using the FUNCTION (opera-
tion/inspection mode) mode, as the copier may malfunction and be damaged if a print job is received from
outside while an operation is executing with this mode in effect.
1) Press the asterisk key (
2) Press 2 and 8 simultaneously on the numeric keypad.
3) Press the asterisk key (
The initial screen (see below) now appears.
Copier service modes
ADF service modes
Displayed only when the ADF is attached.
Sorter/finisher service modes
Displayed only when the finisher is attached.
(There are no modes for the sorter,
so
when the sorter is attached.)
Option board service modes
Displayed only when an option board is
attached.
17.1.3 Exiting service modes
When the reset key is pressed once, the display returns to the service mode initial screen.
When the reset key is pressed twice, the service modes are exited, and the display returns to the user screen
(standard screen).
When using the ADJUST, FUNCTION or OPTION service mode, be sure to turn the main power switch
ON/OFF after exiting the mode.
17.1.4 Backing Up Service Mode
At time of shipment from the factory, each machine is adjusted, and the adjustment values are recorded on
the Service sheet [1] (attached to the cover of the Service Book case behind the front cover).
If you have replaced the reader controller PCB, DC controller PCB (or if you have cleared the RAM of
these), the ADJUST and OPTION settings will be replaced by default settings.
If you have made adjustments in the field and changed service mode settings, be sure to print out the Serv-
ice sheet and store it away (COPIER>FUNCTION>MISC-P>LBL-PRNT). If the label lacks items, use its
margin.
You can also print out a complete list of service mode settings: COPIER>ADJUST/OPTION/COUNTER;
COPIER>FUNCTION>MISC-P>P-PRINT.
17-2
) on the operation panel.
)on the operation panel.
isn't displayed even
SORTER
COPIER
FEEDER
SORTER
BOARD
F-17-3
[1]
F-17-4
0011-5846
0011-5847
0011-5848
Advertisement
Chapters
Table of Contents
