Feeder; Feeder Items - Canon imageRUNNER 7095 Service Manual
Hide thumbs
Also See for imageRUNNER 7095:
- Brochure & specs (8 pages) ,
- Specifications (4 pages) ,
- Driver manual (180 pages)
Table of Contents
Advertisement
Sub item
HD-
Use it to initialize the partition selected using CHK-TYPE.
CLEAR
<Procedure>
1) Select the item.
2) Press the OK key.
3) Turn off and then on the main power so that initialization starts.
Do not turn off the power while initialization is under way.
DEBUG-1 Use it to set the type of log to store/timing of storage to the HDD.
settings
0 to 3 (default: 0)
Use this item when troubleshooting a fault. Be sure to change the setting as instructed by the
QA Support department.
DEBUG-2 Use it to print out logs stored on the HDD.
<Procedure>
1) Select the item.
2) Press the OK key.
3) See that the log is printed. (about 2 sheets of A4)
Use this time when troubleshooting a fault. Be sure to change the setting as instructed by the
QA Support department.
17.5.2 FEEDER
17.5.2.1 FEEDER Items
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description
SENS-
Use it to adjust the sensitivity of the various sensors of the ADF.
INT
Be sure to clean the sensors before executing the item.
Procedure
1) Select the item, and press the OK key.
2) See that the adjustment ends automatically.
BLT-
Use it to clean the separation belt of the ADF.
CLN *
<Procedure>
1) Select the time, and press the OK key.
2) See that the separation belt goes on. Press the Stop key to stop the operation.
REG-
Use it to clean the registration roller of the ADF.
CLN *
<Procedure>
1) Select the item, and press the OK key.
2) See that the registration roller rotates. Press the Stop key to stop the operation.
MTR-
Use it to check the ADF motor on its own.
CHK **
<Procedure>
1) Select the item.
2) Type in the number of a specific part using the keypad.
3) Press the OK key.
4) Press MTR-ON to check the operation.
No. and Part
0: pickup motor
1: transport motor
TRY-A4
Use it to execute auto adjustment on paper width detection reference point 1 for the original
**
pickup tray of the ADF. (A4)
TRY-A5R
Use it to execute auto adjustment on paper width detection reference point 2 for the original
**
pickup tray of the ADF. (A5R)
COPIER > FUNCTION > SYSTEM
Description
T-17-46
FEEDER > FUNCTION
Chapter 17
Level
1
2
2
0011-6095
Level
1
1
1
1
1
1
17-57
Advertisement
Chapters
Table of Contents
