free hit counter

Asus Ez Flash 2 Utility - Asus M2N-SLI Hardware User Manual

Asus computer hardware user manual
Hide thumbs Also See for M2N-SLI:
Table of Contents

Advertisement

4.1.3

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3.
You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
ASUSTek EZ Flash 2 BIOS ROM Utility B312
FLASH TYPE: Winbond W39V080A 8Mb LPC
Current ROM
BOARD: M2NSLI Deluxe
VER: 0122
DATE: 04/27/2006
PATH: C:\M2N320C
A:
C:
Note
[Enter] Select
[Tab] Switch
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2
and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the correct file is
found. Then press <Enter>.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
This function can support devices such as USB flash disk, hard disk, or
floppy disk with FAT 32/16/12 format only.
Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS M2N-SLI Deluxe
WIN98SE
<DIR>
NETTERM
<DIR>
DRIVERS
<DIR>
RECYCLED
<DIR>
WUTEMP
<DIR>
NEWFOL~1
<DIR>
INSTALL
<DIR>
TEST_REB
<DIR>
<DIR>
MSDOWNLD.TMP
[S] Save
[Up/Down/Home/End] Move
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[ESC] Exit
4-5

Advertisement

Table of Contents
loading