10. Place the RAID battery or flash power module into the battery/flash power
88
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
8. Close the SAS cable guide cover.
9. Press the tray retention clip tab outward to release the retention clip that
secure the batteries and flash power modules in the battery/flash power
module trays (on the top of the USB/video assembly near the front of the
server).
module tray (install the batteries or flash power modules in the trays starting
from top to bottom).
Note: If the RAID cache card is installed in the connector on the system
board, place the battery or flash power module in the battery/flash power
module tray slot closest to drive bay 0.