Display Of The Equipment's Log (Function Code 80) - Brother DCP130C Service Manual
Hide thumbs
Also See for DCP130C:
- User manual ,
- Software user's manual (155 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
9.4.21 Display of the Equipment's Log (Function code 80)
Function
The machine can display its log information on the LCD.
This procedure allows you to reset the purge count. It is necessary to reset the purge count when
the ink absorber box is replaced with a new one without replacing the main PCB.
Operating Procedure
(1) Enter 8 and 0 in the initial stage of the maintenance mode using the / and OK keys.
The calendar clock appears on the LCD.
(2) Press the Black Start (Mono Start) key. Pressing the key more than ten times calls up the
following log information items on the LCD, one by one. (The following list does not include
all items.)
- Head property code
- PictBridge information
- Ink drop count, indicating how many droplets have been jetted out from each of the ink
cartridges*
- Ink drop count after near-empty, indicating how many droplets have been jetted out from
each of the ink cartridges*
- Total ink drop count, indicating how many droplets the machine has jetted out from each of
the ink cartridges*
- Ink cartridge change count, indicating how many times ink cartridge replacement has been
made for each color*
- Jam count, indicating how many times a paper jam has occurred
- Total page count, indicating how many pages have been printed since the machine was
produced
- PC print page count, indicating how many pages the machine has printed as an output
device of the connected PC
- Color copy page count, indicating how many copies in color have been made
- Black copy page count, indicating how many copies in monochrome have been made
- Memory card print page count, indicating how many pages have been printed from the
memory card data
- FAX page count, indicating how many received FAX pages have been printed
(This item is not applicable to the models covered by this manual. This counter is always
fixed to "0000000000.")
- Purge count, indicating how many times the purge operation has been carried out
(With the purge count displayed, entering 2, 7, 8, and 3 using the / and OK keys resets
the purge count.)
- Purging record for each purge type
- Wiper count, indicating how many times the wiper operation has been carried out
- Flushing count, indicating how many times the flushing operation has been carried out
(With the flushing count displayed, entering 2, 7, 8, and 3 using the / and OK keys
resets the flushing count.)
1
1
after the ink cartridge sensor detects near-empty.
1
since produced
1
9 - 4 0
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
