Brother DCP130C Service Manual page 308
Hide thumbs
Also See for DCP130C:
- User manual ,
- Software user's manual (155 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
After replacing the main PCB with the one used for any other machine or when changing programs
Unplug the power cord from the electrical outlet and make sure that the machine is connected with
your PC using a USB cable.
Models with color LCD: While holding down the
Models with monochrome LCD: While holding down the Number of Copies key, plug the power
cord into an electrical outlet.
The black and white pattern appears on the LCD as shown on the previous page. The machine is
ready to receive programs or data for firmware installation from the connected PC.
(1) On your PC, run "filedg32.exe."
The Filedrgs window will appear as shown below.
(2) Drag and drop the firmware (e.g., lz0023_a.pmu) onto the BHL2-Maintenance Printer icon in
the Filedrgs window shown above.
NOTE: To use a firmware file, extract it beforehand by double-clicking. It is a self-extracting
file having the extension .exe.
After approx. 2 to 5 minutes, the loading operation is complete and the machine automatically
reboots and returns to the standby state.
key, plug the power cord into an electrical outlet.
App. 2-7
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
