Brother DCP130C Service Manual page 366
Hide thumbs
Also See for DCP130C:
- User manual ,
- Software user's manual (155 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
Selector
No.
1
Not used.
2
End-of-copying beep
3
(Not used.)
4
Command flag detection time
5
CCD warmup time adjustment
6
7
(Not used.)
8
Black ink print mode
Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow for the
time length specified by these selectors.
Selector 8: Black ink print mode
If any color ink runs out, printing is no longer possible by default. Setting this selector to "1" allows
the machine to ignore the ink empty state and print data with black ink only, resulting in a printout
missing color components.
Note: The assurance mode switch setting made by Selector 3 on AMS04 (triggered with function
code 88 described in
as a monochrome printer with black ink only.
WSW49
(End-of-copying beep and black ink print mode)
Function
Chapter 9, Section
9.4.23) allows the machine to print all color and black data
App. 4-53
Setting and Specifications
0: Yes
No. 4 5
0 0 : 150 ms
0 1 : 350 ms
1 0 : 550 ms
1 1 : 750 ms
No. 6 7
0 0 : No adjustment
0 1 :
80%
1 0 : 120%
1 1 : 150%
0: Disable (default)
1: No
1: Enable
ms: millisecond(s)
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
