Brother DCP130C Service Manual page 96
Hide thumbs
Also See for DCP130C:
- User manual ,
- Software user's manual (155 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
Error Code
(Hex)
The number of performed
46
purge sequences has
reached the limit.
The ink absorber box may
be filled with drained ink.
The number of flushing
operations has reached the
limit.
The flushing box may be
filled with drained ink.
47
Not used.
48
Weak connection of the
head flat cables.
49
The head drive voltage has
not risen to the specified
level.
4A-4E
Not used.
4F
The head drive voltage has
dropped from the high to
low level in an abnormally
short period.
The head drive voltage has
not risen to the specified
level within the specified
period in the self-
diagnosis.
Symptom
4 - 6
Probable Cause
Purge counter overflown
Flushing counter
overflown
Head flat cables or
carriage-head flat cable
broken or not
connected
Head flat cables and
carriage-head flat cable
not connected correctly
Head/carriage unit
defective
Main PCB defective
Power supply PCB
defective
Piezoelectric ceramic
actuator defective
(Cracks or rare short)
Main PCB defective
Solution
Replace both the ink
absorber box and flushing
box and reset their
counters. (When you
need to replace the ink
absorber box or flushing
box, replace both.)
Correct the connection
of the head flat cables.
Replace the carriage
PCB ASSY.
Replace the
head/carriage unit.
Replace the main PCB.
Correct those flat cables.
Replace the carriage PCB
ASSY.
Replace the head/carriage
unit.
Replace the main PCB.
Replace the power supply
PCB.
Replace the carriage PCB
ASSY.
Replace the head/carriage
unit.
Replace the main PCB.
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
