Advertisement
Quick Links
Addonics
T E C H N O L O G I E S
Addonics iSCSI Subsystem
Model: ISC8P2G -S
Quick Install Guide
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant t o Part 15 of the F CC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, us es and can radiate radio frequency energy. If not installed and
used in accordance with the inst ructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which ca n be determined by turning the equipment
is encouraged to try and correct the interferenc e by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the rece iver
Connect the equipment t o a different power outlet other than the one where rece iver is
connected
Consult a certified television or radio technician
Note:
Overview
LCM (LCD Control Module) Display
on and off, the user
For more detailed information on the Addonics ISC8P2G-S iSCSI
Subsystem, refer to the User Manual on the CD. You can also visit
our website
www.addonics.com
This Quick Install guide provides information on how to create an
iSCSI drive on the Addonics ISC8P2G-S iSCSI Subsystem and how
to connect to the drive using Microsoft iSCSI Initiator.
Front View
Rear View
LAN 2 Data po rt
LAN 1 Data port
Web GUI IP port
4-Port Molex
power connector
Advertisement
Summary of Contents for Addonics Technologies ISC8P2G-S
- Page 1 Subsystem, refer to the User Manual on the CD. You can also visit our website www.addonics.com This Quick Install guide provides information on how to create an iSCSI drive on the Addonics ISC8P2G-S iSCSI Subsystem and how to connect to the drive using Microsoft iSCSI Initiator. Addonics Overview...
- Page 2 Top View ISC8P2G-S Mounted on the Storage Tower & Storage Tower II ISC8P2G -S ISC8P2G -S DDR II Slot SATA ports SATA ports LAN Cable Connections on the Storage Tower ISC8P2G-S Mounted on the Storage Rack ISC8P2G -S LAN 1 Data port...
- Page 3 ISC8P2G-S. Connect the web GUI port cable, and ISC8P2G-S data port cables first. LCM (LCD Control Module) Display After booting up the ISC8P2G-S iSCSI subsystem, the LCM display shows web GUI port IP and model name: 192.168.1.50 Addonics ISC8P2G-S •...
- Page 4 The “Quick install” function is used to create a volume. correct. Then a VD will be created. The ISC8P2G-S Quick Install function has a smart policy. When the system is full, meaning all 8 HDD are connected, and all HDD have the same size, ISC8P2G-S Quick Install function lists all possible configurations and sizes among different RAID level options.
- Page 5 Windows Server 2003 with SP1 Windows Server 2003 R2 Microsoft iSCSI Initiator Step 1: Determine iSCSI data port IP address or DNS name of ISC8P2G-S iSCSI subsystem Before using the Microsoft iSCSI Initiator, you need to determine first the iSCSI data port IP address or DNS name of ISC8P2G-S iSCSI subsystem.
- Page 6 Select I Agree and click Next. Click Finish. Click “Discovery ” tab. Step 3: Running the Windows iSCSI Initiator Run Microsoft iSCSI Initiator version 2.08 icon from the desktop. The iSCSI Initiator Properties window opens.
- Page 7 Click “Add”. Input IP address or DNS name of ISC8P2G-S iSCSI Click “Log On”. subsystem. Click “OK”. The status would be “Connected”. Click “OK”. Click “Targets”. The iSCSI disk will show up in Disk Management. ISCSI drive...
-
Page 8: Technical Support
OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information about your problem so that we can recreate and diagnose it. FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www.addonics.com...