Table of Contents
Advertisement
Step 5
1. Look at the type and slot positions you recorded, and install the
boards and adapters you removed.
2. Set the power switch on the system unit to Off.
3. Install the top cover. If needed, see Section 4.
4. Set the power switch on the system unit to On.
5. Follow the instructions on the menus to run the System
Checkout. If needed, see page 2-17.
TESTING COMPLETE
Press Enter to continue.
DIAG-2
WERE YOU ABLE TO LOAD AND RUN THE "SYSTEM
CHECKOUT" AND DID THE "NO TROUBLE WAS FOUND"
MESSAGE DISPLAY?
NO
If you were unable to run the System Checkout because the
system stopped with 23 displayed in the two-digit display,
go to "Unresolved Problem PIC 0060" on page 3-0060-1
otherwise, go to "Problem Determination Procedure PIC
0030" on page 3-0030-1.
YES
This completes the repair.
(6/88)
Problem Isolation Charts
3-9840-5
Advertisement
Chapters
Table of Contents
