Table of Contents
Advertisement
Removal Procedure
1.
Set the power switch on the system unit to Off.
2. Do the Rear Cover Removal. If needed, see Section 4.
3. Disconnect the cable to the IBM 5085 LPFK Feature from the
RT PC 5080 Peripheral Adapter.
4. Remove the clamping device and disconnect the LPFK Feature
Cable.
Replacement Procedure
1.
Connect the LPFK Feature cable connector to the cahle from
Peripheral Cable Kit and install the clamping device.
2. Connect the cable to the RT PC 5080 Peripheral Adapter.
3. Do the Rear Cover Replacement. If needed, see Section 4.
4. Set the power switch on the system unit to On.
10-147-2
Service Manual
Advertisement
Chapters
Table of Contents
