Table of Contents
Advertisement
Telephoning
Intercom: After entering the device ID, you can initiate an announcement to a single
system terminal. The microphone of the end terminal called will be switched on and
the person you are calling can immediately answer your announcement. The
"Intercom" function cannot be used for announcements to a group of terminals.
Charges: You see the charges for the last call and the total call charges for your tele-
phone.
Door opener:* This activates the door opener.
Notes: Note down a call number and a name or select a noted number.
Suppress number: For the following (internal or external) call, your call number will
not be presented to the called subscriber. This menu item is dependent on the system
settings.
Transmit number: For the following call, your call number will be presented to the
called subscriber. This menu item is dependent on the system settings.
LCR off:* This switches the least cost routing function off. When configuring your user
group the system administrator can determine that LCR should not be used. In this
case this menu item will not be displayed.
VIP call:* Your next call will be treated as a VIP call. Even if the internal subscriber you
are calling has activated call-waiting protection, call protection or call forwarding (on
his system terminal), your call will still be acoustically signalled.
Main menu: The main menu will be displayed, see "Main" Menu starting on page 68.
You can also open this menu with a long press on the Menu softkey.
Making External/Internal Calls
Seizing an External Line Manually or Automatically and Entering of
Call Numbers
If you hear an external dialling tone when you press the receiver key, your telephone
is set to automatic external line seizure. If you hear an internal dialling tone when you
press the receiver key, your telephone is set to manual external line seizure. Which
kind of external line seizure is applicable to you is preset by the system administrator.
If your telephone is set to manual external line seizure, an internal line will be seized
when you press the receiver key and you can immediately dial an internal number. For
external calls you will have to enter the external line seizure digit (preset to "0") before
38
Advertisement
Table of Contents
