Table of Contents
Advertisement
Features and Menus
Remote charges: You can view the charges of other OpenCom 100 / Aastra 800 users
by entering the other user's internal number or by selecting a number from the tele-
phone book.
Hunt group: If your telephone belongs to one or more hunt group(s), you can use this
menu entry to switch hunt group signalling for your telephone on or off. When there
are multiple trunk keys configured on your telephone and assigned to hunt group call
numbers, you can switch the hunt group signalling for each of these keys on or off. To
do so, select the desired key (e. g. L1: [internal call number]) and then press the
Ok softkey.
HG No: [internal call number]: The pick-list of hunt group call numbers appears.
Activated hunt group calls have a "+" prefixing the hunt group call number; deacti-
vated ones have a "-". Use the on/off options to switch hunt group call signalling on
or off for the call number dialled. Use the All menu entry to switch signalling of all
hunt group calls for your telephone on or off (On/Off ).
Note
If you are the last reachable member of the hunt group and you log out then any fur-
ther callers will hear a busy signal. Depending on the system configuration, addi-
tional callers can also be forwarded to the exchange.
Device busy: If there are multiple trunk keys configured on your telephone, you can
configure that as soon as one of the trunk keys is occupied your device is considered
busy. Any further callers hear the busy signal. You can activate this function with On
or deactivate it with Off. A "+" appears to designate the function is activated.
"Call forwarding" Menu
First select Call forwarding and then ...
Call diversion: Programming call forwarding for one's own telephone. When you
have multiple trunk keys configured on your telephone, you can programme call for-
warding for each of these keys individually. To do so, select the desired key (e. g. L1:
[internal call number]) and then press the Ok softkey. Select Immediately, After
delay or Busy for the forwarding mode. Then key in the call forwarding destination
(please refer to the chapter entitled Making External/Internal Calls starting on
page 38). Time: When programming call forwarding after time, enter the time in
seconds after which a call is to be forwarded (10 ... 120 seconds). If you do not enter a
value, the default time interval provided by the system administrator at system con-
figuration is used (default: 20 seconds). Then select whether internal calls, external
71
Advertisement
Table of Contents
