Table of Contents
Advertisement
6.
JMicron JMB363
This connector is for a Serial ATA signal cable. This connector supports a
Serial ATA hard disk drive, which you can combine with an external Serial
ATA hard disk drive to configure for RAID via the unboard Serial ATA RAID
controller.
The JMicron controller mode item in the BIOS is set to [BASIC] by default.
When set to [RAID], this item allows you to use the connectors to build a RAID
set. See section "2.4.6 Onboard Device Configuration" for details.
P5B-VM DO SATA RAID connector
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron
BIOS setup during POST.
7.
TPM connector (20-1 pin TPM_SLOT)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system
also helps enhance network security, protects digital identities, and ensures
platform integrity. See section "2.4.3 TPM Configuration" for details.
P5B-VM DO TPM connector
ASUS P5B-VM DO
Serial ATA RAID connector (7-pin SATA_RAID1)
®
SATA_RAID1
TPM
GND
RSATA _RXN1
RSATA _RXP1
GND
RSATA _TXN1
RSATA _TXP1
GND
JMB363 RAID utility and SATA
®
1-35
Hide quick links:
Advertisement
Table of Contents
